RMweb Premium Temeraire Posted April 10, 2017 RMweb Premium Share Posted April 10, 2017 (edited) Evening all Whilst looking for something else on the laptop this weekend I came across the pictures I took when I was modifying the pick ups on one of my Dapol 73s. These were previously posted on the Class 73 thread but I removed them after a time and I thought they were lost. I have had so many people contact me regarding the mods I thought I would create the subject's own thread once I found the pics. As before I must credit Kevin (Hampshire Hog) for initially diagnosing the problem and making modifications, all I've done is slightly changed the way they are fitted, so here goes. The Dapol pickups can be seen in this pic and notice the bottom right one has moved out of line with the brass bearing that makes contact with the wheel, this is one of the issues. The other is the pickups are in the space occupied by the gears and the grease/oil, again not good. First task cut two small 'vees' in each bogie side to accommodate the new pickups. Using some brass wire make a 'U' shape but with right angled corners and then bend the base of the 'U' into a curve to follow the shape of the centre of the Dapol pickups. The shaped wire needs to fit snugly against the existing pickup and fit behind the plastic lug. Before fitting clean the Dapol pickups to remove all traces of grease etc. Using a bit of flux, very carefully solder the new pickup to the old. Do not heat for too long and melt any plastic! Bend the pickups to shape to fit behind the wheel backs. Cut to length and bend to form a contact with each wheel. Refit bogie top and test the loco. The brass wires can then be painted black and once the bogie sides are refitted they are invisible but make a huge difference to the performance of the locos. The other mod I make is to place a piece of insulating tape in position shown to disable the cab lights. I hope this is of use to you all and I can confirm that both my Class 73s have run faultlessly on Tidworth since the modifications were done, (and they were both repainted of course!). Edited July 19, 2022 by Temeraire 6 1 4 2 3 Link to post Share on other sites More sharing options...
Blue13 Posted April 11, 2017 Share Posted April 11, 2017 Thanks for posting. I was actually going to contact you as one of my 73's has started to stutter. How did you remove the bogie frames as I found these really difficult to take off. Cheers Ian. Link to post Share on other sites More sharing options...
RMweb Premium Temeraire Posted April 11, 2017 Author RMweb Premium Share Posted April 11, 2017 How did you remove the bogie frames as I found these really difficult to take off. Cheers Ian. Hi Ian It's been a while since I did it but just a screwdriver blade between frame and bogie at one end should ease it off. Be ready to catch the parts that fall off though! Link to post Share on other sites More sharing options...
Blue13 Posted April 11, 2017 Share Posted April 11, 2017 Hi Ian It's been a while since I did it but just a screwdriver blade between frame and bogie at one end should ease it off. Be ready to catch the parts that fall off though! LOL yes I've already discovered how easily things fly off. I was hoping just cleaning the pick ups would cure the stutter that has suddenly started......so I'm going to follow your instructions and add the extra pick ups. Thanks again Ian. Link to post Share on other sites More sharing options...
simonbaker1966 Posted April 28, 2018 Share Posted April 28, 2018 Just came across this thread and am delighted to see that the original cure has been reposted...I might now go and repurchase a 73 as I returned my original one back to Dapol, purley because of its poor running qualities. Link to post Share on other sites More sharing options...
SRman Posted April 28, 2018 Share Posted April 28, 2018 This mod is still on my "to do" list.I did carry out the mods (from the original topic, if I remember correctly) to the pcb to actually get the cab lights working and switchable from the decoder. That involved cutting the tracks and soldering connecting wires from the decoder pins (on the pcb) to the resistors in line with the cab light connections. Link to post Share on other sites More sharing options...
Tony Walker Posted April 11, 2020 Share Posted April 11, 2020 I've finally got around to carrying this mod to my three class 73's. I just did one bogie on one 73 at first to see how well it worked. Ran the loco without the mod, then did the mod to one bogie and ran it again. What a difference it made with just one bogie. So I did both bogies on the first one, then did the mod to the other two. Faultless running now, no stuttering or needing a push to get going and the slow running is spot on. Thanks very much Temeraire for the details. And best still, it doesn't take that long. Probably spent longer re-assembling the brake mechanism on one of the bogies, which fell off, than actually converting one loco. 1 1 1 Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted April 11, 2020 Share Posted April 11, 2020 Didn't see this thread first time around so this 'resuscitation' is useful, as I suspect the pick up arrangement on the class 21 has much in common. This model is working faultlessly at present, but should it ever degrade there's a proven solution. Link to post Share on other sites More sharing options...
westonp Posted July 18, 2022 Share Posted July 18, 2022 Good afternoon, As I've come down with covid again I've been catching up with some long overdue jobs. One has been to fit decoders to my two BR blue examples, 73124 and 73135. Would I be correct in assuming they're both version 1 releases? I'm pleased to have found this article, however the photos are not loading. Am I doing something wrong, here? Thank you. Paul. Link to post Share on other sites More sharing options...
cliff park Posted July 18, 2022 Share Posted July 18, 2022 Early article photos were lost when this site crashed a month or two ago. They have to be reloaded by the original poster. 1 Link to post Share on other sites More sharing options...
RMweb Premium Temeraire Posted July 18, 2022 Author RMweb Premium Share Posted July 18, 2022 Give me a few days I’ll see if I can find them again. 2 Link to post Share on other sites More sharing options...
RMweb Premium Temeraire Posted July 19, 2022 Author RMweb Premium Share Posted July 19, 2022 All pics reloaded hopefully in the right order. 4 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now