RMweb Premium wagonbasher Posted December 23, 2016 RMweb Premium Share Posted December 23, 2016 Name plates yet to be fitted which will again be along my 'Blackadder' theme. Wait and see who it will be Bob? Andy Link to post Share on other sites More sharing options...
sir douglas Posted December 23, 2016 Share Posted December 23, 2016 mrs miggins Link to post Share on other sites More sharing options...
avonside1563 Posted December 23, 2016 Share Posted December 23, 2016 Yup! Doubt if it's anything like - but it's my Bagnall. Ah you should have asked.... Doesn't show all the cab but gives a good idea Link to post Share on other sites More sharing options...
Gordon A Posted December 23, 2016 Share Posted December 23, 2016 Am I right in thinking the left hand fitting is a lubricator? Is it an additional fitting for running passenger services? Gordon A Link to post Share on other sites More sharing options...
Marshall5 Posted December 23, 2016 Share Posted December 23, 2016 (edited) Am I right in thinking the left hand fitting is a lubricator? Is it an additional fitting for running passenger services? Gordon A Quite correct Gordon, it's a displacement/hydrostatic lubricator. Often they're referred to as "Detroit" lubricators.but other companies also made them. I used to own a Peckett W6 which had a Hattersley's version (probably fitted as an 'after market' addition) as well as the maker's 'standard' mechanical type. I'm afraid it has nothing to do with passenger working as it is just used for supplying cylinder oil to the valves and cylinders. Occasionally an additional mechanical lubricator has been fitted to feed motion oil to the axleboxes to combat overheating sometimes experienced when industrial locos are employed on longer heritage lines. Of course converting an industrial loco for passenger use also entails fitting a vacuum brake ejector, brake valve and associated pipework. Hope this helps. Ray. Edited December 23, 2016 by Marshall5 Link to post Share on other sites More sharing options...
5050 Posted December 30, 2016 Author Share Posted December 30, 2016 Here he is, now weathered - and named. I'm not very happy with the weathering, I feel I might have overdone it a bit. In the photos it looks quite 'streaky' and a bit amateurish but in the flesh, not so bad I suppose. I'm more used to weathering small diesels. There is a driver in the cab but he can't be seen unless you get down and close. Bunker is also yet to be filled with the black stuff and the front spectacle plates might get some glazing. He seems to run nicely whatever. Not named 'Bob' because I reckon with his size, he's male (and he's green). I do have 'Queenie' in stock though and I think I know which one of the fleet will be so named. I just haven't told him yet............................... A set of builders plates will finally finish him once I get round to obtaining a pair. 4 Link to post Share on other sites More sharing options...
Barclay Posted January 6, 2017 Share Posted January 6, 2017 (edited) Great to see it finished - I've been following your progress and it certainly helped me to finish mine. I can certainly recommend the Narrow Planet Builders' plates. Edited December 8, 2022 by Barclay Replace photo 10 1 Link to post Share on other sites More sharing options...
Adam Posted January 6, 2017 Share Posted January 6, 2017 'Barclay', that's lovely - as is what appears to be one of those Nasmyth Wilson 0-8-0 tanks in your avatar? - have you seen my Bagnall thread? http://www.rmweb.co.uk/community/index.php?/topic/30496-preston-docks-bagnalls-impetus-kit-and-prototype/?hl=bagnall Adam Link to post Share on other sites More sharing options...
Barclay Posted January 6, 2017 Share Posted January 6, 2017 'Barclay', that's lovely - as is what appears to be one of those Nasmyth Wilson 0-8-0 tanks in your avatar? - have you seen my Bagnall thread? http://www.rmweb.co.uk/community/index.php?/topic/30496-preston-docks-bagnalls-impetus-kit-and-prototype/?hl=bagnall Adam Thanks Adam - Yes I read your thread as well. It's thanks to you I shortened the chimney, although you can still see the mark unfortunately! Yes the Nasmyth Wilson was my previous project. I have vowed never to build a loco with outside valve gear again... 1 Link to post Share on other sites More sharing options...
RMweb Gold Ruston Posted April 6, 2021 RMweb Gold Share Posted April 6, 2021 I have one of these kits to build and am wondering exactly which gearbox fits. I note the brass final drive gear but haven't seen one like that at all. 1 Link to post Share on other sites More sharing options...
5050 Posted April 6, 2021 Author Share Posted April 6, 2021 1 hour ago, Ruston said: I have one of these kits to build and am wondering exactly which gearbox fits. I note the brass final drive gear but haven't seen one like that at all. I think it is a Loadhauler Dave. Tthe final drive gear MAY now be one of the 'hybrid' ones now, nylon with a brass centre? Mine was a couple of years old. 2 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted April 6, 2021 RMweb Premium Share Posted April 6, 2021 I have one of these in roundtuit pile too... Baz Link to post Share on other sites More sharing options...
Adam Posted April 6, 2021 Share Posted April 6, 2021 (edited) I think I put a Road Runner + in mine (I prefer my steamers to accelerate fairly sharply) but any of those articulated gearboxes will work if you make the boiler it’s own sub assembly. Not that they’re available at this precise moment... Adam Edited April 6, 2021 by Adam Link to post Share on other sites More sharing options...
Barclay Posted April 7, 2021 Share Posted April 7, 2021 I believe mine has a Branchlines Multibox but as Adam says you have to modify the kit so the boiler/tank unit is detachable. The original kit recommendation, which pre-dates nice gearboxes of course, suggests a 9/16 motor mounted vertically in the firebox, and Romford gears. This would work but probably lacks power... Link to post Share on other sites More sharing options...
Adam Posted April 7, 2021 Share Posted April 7, 2021 2 minutes ago, Barclay said: I believe mine has a Branchlines Multibox but as Adam says you have to modify the kit so the boiler/tank unit is detachable. The original kit recommendation, which pre-dates nice gearboxes of course, suggests a 9/16 motor mounted vertically in the firebox, and Romford gears. This would work but probably lacks power... That was what you did back about 1990. Slightly alarmingly, that’s 30 years ago. The kit (and the the design of the loco) does make this easy enough. Adam Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now