meld Posted September 23, 2016 Share Posted September 23, 2016 Wasn't the 4 COR still there back in 2015?? Steady Now!! MC Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted September 23, 2016 RMweb Gold Share Posted September 23, 2016 U Class: Problem with the U Class is the number of variants within just a 50 strong class. Would love to see it happen though. Rebuilt 'Battle of Britain' Class: Would require a brand new tooling for the tender. The 5250g tender hasn't been seen in model form since the days of Hornby Dublo. P Class: Wasn't there a thread on here not too long ago, detailing the differences between all 8 members of the class? The 5250 gallon tender body could also be used with the rebuilt MN thus giving new variants to refresh sales of both models for a quite modest investment. Hornby already have appropriate tender chassis for both classes. John Link to post Share on other sites More sharing options...
Ozexpatriate Posted September 23, 2016 Share Posted September 23, 2016 (edited) There is certainly a lot of content in this edition of the 'The Engine Shed' blog. It is nicely done, not only the new announcement of course, but the update on the LMS coke hoppers, and for me, most importantly communication about additional developments, expressed conversationally, but setting very reasonable expectations for 2017 announcements. I have for some time wondered whether biweekly might not be too frequent a publication rate for the development team given the 'day job' requirements on their time. Even compiling, proofing and editing a relatively short blog post will take someone some hours of effort to produce. Having said that, I think this is a very worthwhile communications endeavour and encourage them to continue. If it runs to three weeks between publication and we get updates like this, then that's just fine. Edited September 23, 2016 by Ozexpatriate Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted September 23, 2016 RMweb Gold Share Posted September 23, 2016 (edited) Now now, I am currently read'in the definitive Bullied Power Merchant Navy book by Fry and he calls them unrebuild and rebuild, and he knew lots of people who worked 'em. So if its goodi'nuff for 'im, its goodi'nuff for me. BR or Bluebell version will be fine to me and sherley much better than me renamed Wrenn one. The men in malachite green and sunshine yellow robes are currently enroute to your location and your room with ensuite hot and cold water-boarding has been prepared at Guantanamo Bay.. Edited September 23, 2016 by toboldlygo Link to post Share on other sites More sharing options...
JSpencer Posted September 23, 2016 Share Posted September 23, 2016 U Class: Problem with the U Class is the number of variants within just a 50 strong class. Would love to see it happen though. Rebuilt 'Battle of Britain' Class: Would require a brand new tooling for the tender. The 5250g tender hasn't been seen in model form since the days of Hornby Dublo. P Class: Wasn't there a thread on here not too long ago, detailing the differences between all 8 members of the class? You would thought Bachmann would have done a U by now given its strong similarity to the N class. Link to post Share on other sites More sharing options...
JSpencer Posted September 23, 2016 Share Posted September 23, 2016 (edited) Wasn't the 4 COR still there back in 2015?? Steady Now!! MC Given the number of bargain basement 2 car EMU sets out there at the moment (of which I took my fill), it would not surprise they postponing such a thing (if they ever had ideas to do one) until the finances can support it. The last thing Hornby need is another set of unsold EMUs. I,d buy them of course. Edited September 23, 2016 by JSpencer Link to post Share on other sites More sharing options...
MGR Hooper! Posted October 7, 2016 Share Posted October 7, 2016 http://www.Hornby.com/uk-en/news/the-engine-shed/10594/ Link to post Share on other sites More sharing options...
RMweb Gold Hroth Posted October 7, 2016 RMweb Gold Share Posted October 7, 2016 (edited) Arghhh!!!!! I saw the headline and thought they'd cancelled the B12! Reading further - they've approved the livery sample for the LNER version, but haven't seen the BR examples yet. But the LNER livery is the last that Hornby are letting go in early December, the BR versions are mid to late November. I suppose there's less to go wrong with black... C'mon lets have them all sooner! (I see the lettering and numbers are level - that'll stop some whinging...) And what about a TTS B12 - there's a live one to record! Edited October 7, 2016 by Hroth Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted October 7, 2016 RMweb Gold Share Posted October 7, 2016 Arghhh!!!!! I saw the headline and thought they'd cancelled the B12! Reading further - they've approved the livery sample for the LNER version, but haven't seen the BR examples yet. But the LNER livery is the last that Hornby are letting go in early December, the BR versions are mid to late November. I suppose there's less to go wrong with black... C'mon lets have them all sooner! (I see the lettering and numbers are level - that'll stop some whinging...) And what about a TTS B12 - there's a live one to record! Looking at their website, Hornby have posted pictures of the approval samples in Lined Black (both Early and Late Crest) on the product pages for them http://www.Hornby.com/uk-en/br-4-6-0-holden-b12-class-br-late.html http://www.Hornby.com/uk-en/br-4-6-0-holden-b12-class-br-early.html 1 Link to post Share on other sites More sharing options...
RMweb Gold Hroth Posted October 7, 2016 RMweb Gold Share Posted October 7, 2016 Looking at their website, Hornby have posted pictures of the approval samples in Lined Black (both Early and Late Crest) on the product pages for them http://www.Hornby.com/uk-en/br-4-6-0-holden-b12-class-br-late.html http://www.Hornby.com/uk-en/br-4-6-0-holden-b12-class-br-early.html Quoting todays Engine Shed, "And that is what we have to show today, the Final Approval Sample for the LNER livery. We had planned (and would have loved) to show you the decoration samples for the Late and Early BR liveries as well, but unfortunately these are still in transit from our Hong Kong office." The ones on the website are probably just livery samples for the BR black models - whilst the LNER green shown in Engine Shed is the "press the button and make the batch" sample. Link to post Share on other sites More sharing options...
RMweb Gold Hroth Posted October 7, 2016 RMweb Gold Share Posted October 7, 2016 Did anyone notice in the cab detail shot that the body fixing screw appears to be in the same place as the old B12? Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted October 7, 2016 RMweb Premium Share Posted October 7, 2016 Did anyone notice in the cab detail shot that the body fixing screw appears to be in the same place as the old B12? It's in the same place on the GWR Grange Link to post Share on other sites More sharing options...
JaymzHatstand Posted October 7, 2016 Share Posted October 7, 2016 They've upgraded from a flat head to a cross head screw though! The LNERg green version is looking worryingly appealing, if not a little out of area for a North Eastern guy! They madenitbto Leeds and Donny (according to Hornby) so a little further north is possible right!? The cab detail looks very nicely printed, and definitely as much, if not more than required once a crew is there and its moving, but the innterior sides still appear to be black, which they very rarely were. A BR loco, would usually be cream above the waitline at least, and a pre-Nat loco would doubtless also be painted, but research varies on what colour. I'm not adverse to getting a paintbrush into the cab and colouring in the missing bits (I actually enjoy such tweaking) but I wonder how much extra that would put on the price. It's something I've rarely seen in RTR locos. Cheers J Link to post Share on other sites More sharing options...
edcayton Posted October 8, 2016 Share Posted October 8, 2016 Am I the only person not to have noticed the H class announcement? Ed Link to post Share on other sites More sharing options...
No Decorum Posted October 8, 2016 Share Posted October 8, 2016 Am I the only person not to have noticed the H class announcement? Ed Probably. Link to post Share on other sites More sharing options...
RMweb Gold MikeParkin65 Posted October 8, 2016 RMweb Gold Share Posted October 8, 2016 Nice to see there appears to be a satin sheen rather than the usual flat matt Link to post Share on other sites More sharing options...
No Decorum Posted October 9, 2016 Share Posted October 9, 2016 Nice to see there appears to be a satin sheen rather than the usual flat matt Very good if that turns out to be the case. It’s difficult to tell from photographs because lighting varies so much. I do wish that they would paint the wheels, though. It doesn’t matter if they’re black or possibly olive green but light green is translucent and, besides, never quite matches the body colour. Link to post Share on other sites More sharing options...
edward66 Posted October 9, 2016 Share Posted October 9, 2016 Now now, I am currently read'in the definitive Bullied Power Merchant Navy book by Fry and he calls them unrebuild and rebuild, and he knew lots of people who worked 'em. So if its goodi'nuff for 'im, its goodi'nuff for me. BR or Bluebell version will be fine to me and sherley much better than me renamed Wrenn one. ....And don't call me Sherley! 1 Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted October 18, 2016 RMweb Gold Share Posted October 18, 2016 (edited) Perhaps another teaser is on the cards via 'Lord Isles of Sandwich' if the BSO discussions on http://www.mremag.com/ are anything to go by or perhaps I am part of the tease as well and should foxtrot oscar? Might be worth checking the Engine Shed blog in the next week or so? Edited October 18, 2016 by Graham_Muz 2 Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted October 20, 2016 RMweb Gold Share Posted October 20, 2016 See the @Hornby twitter feed for another possible Fairly Obvious tease... Link to post Share on other sites More sharing options...
MGR Hooper! Posted October 20, 2016 Share Posted October 20, 2016 So it's a Mk1...probably the BSO? Link to post Share on other sites More sharing options...
ndg910 Posted October 20, 2016 Share Posted October 20, 2016 Wouldn't get your hopes up for Bulleid Coaching Stock just yet. The coach in the background of the picture they posted (https://pbs.twimg.com/media/CvM4DksXEAA2xGX.jpg) lacks the split window characteristic of Bulleid coaches: S2810020.JPG I believe the coach pictured is one of the Mk1's that makes up the Wealdon Rambler set. Bluebell Railway 02-07-2016-8.jpg Regards, Matt There's a pic on FB with a Mk1 in the background. Link to post Share on other sites More sharing options...
GreenGiraffe22 Posted October 20, 2016 Share Posted October 20, 2016 "The Wealdon Rambler" set with or without a Bluebell loco next year then? Link to post Share on other sites More sharing options...
olivegreen Posted October 20, 2016 Share Posted October 20, 2016 (edited) Come on, it's a BR standard First Open…. … but that may not be what they are going to produce, of course! Edited October 20, 2016 by olivegreen 1 Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted October 20, 2016 RMweb Premium Share Posted October 20, 2016 It's also possible they are hinting at a coach of unspecified design. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now