JSpencer Posted March 16, 2017 Share Posted March 16, 2017 (edited) My flannel jacket arrived in a packet this morning and agree photoes don,t do them justice. A stunning model. Runs like a dream, the flywheel carrying her forwards a couple of inches when the power is cut from slow to stop - this is before running in! Two early surprises, the pre fitted brake rodding and the return of an actual sliding roof vent: Edited March 16, 2017 by JSpencer 6 Link to post Share on other sites More sharing options...
SDJR7F88 Posted March 16, 2017 Share Posted March 16, 2017 Not sure why you are surprised, the nameplates on Hornby's rebuilt Bulleids have always been pretty good. I know, got a few W/C's both are stunning. Was just reading many of the old post about the plates on here in the past. Link to post Share on other sites More sharing options...
SDJR7F88 Posted March 16, 2017 Share Posted March 16, 2017 (edited) A few pictures taken during the filming of my review. As stated the camera really does doesn't do this stunning model justice! Hope they are help Full review can be seen here; http://www.youtube.com/watch?v=oEc6-rP5Ihs Edited March 16, 2017 by SDJR7F88 3 Link to post Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 Royal Mail via Royal Mail. This time....I'm driving. 1 Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 Dear Hornby, Can we have a Modified Merchant Navy to match the Air-smoothed one now please? Absolutely stunning and it's the attention to the smallest that have taken this Merchant Navy to another level. Having giving Channel Packet a test run, I'm sorely tempted to assemble the legend that is the 'Planet Killer" and see if she can haul it. With her arrival, that's 20 out of the 30 of the class I've owned (or still own) The coupling rods are exquisite, they need to be made a spare.. 7 Link to post Share on other sites More sharing options...
G-BOAF Posted March 16, 2017 Share Posted March 16, 2017 (edited) Wow the coupling rods actually look like they are forged metal, rather than stamped from sheet of brass. They have even got a reprasentation of the corks on top of the oil boxes!!! That must be a first in RTR? I know there have been some great models from Hornby in the post Sanda Kan era (K1, S15, Radial...) BUT the MN does raise the bar, in the same way that the rebuilt version did back in 2000. Things have come full circle. Not quite sure how I can justify one - if they do GSN in its 'maybe eventually to be unrebuilt state'.... Edited March 16, 2017 by G-BOAF 1 Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 Wow the coupling rods actually look like they are forged metal, rather than stamped from sheet of brass. I know there have been some great models from Hornby in the post Sanda Kan era (K1, S15, Radial...) BUT the MN does raise the bar, in the same way that the rebuilt version did back in 2000. Things have come full circle. Not quite sure how I can justify one - if they do GSN in its 'maybe eventually to be unrebuilt state'.... Strangely enough General Steam Navigation is the only Series 2 not to grace my workbench or ownership. Channel Packet will be stay as is, however Royal Mail will have a change of identity at some point (it has been a very long time since I renumbered a Malachite Green Bulleid - 6 years to put a number on it) Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted March 16, 2017 RMweb Premium Share Posted March 16, 2017 Those comparison picture above definitely show the need for a new Light Pacific Link to post Share on other sites More sharing options...
RMweb Gold Godfrey Glyn Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 My two have just arrived from Alton Model Centre by special delivery - many thanks Richard! What wonderful models; loads of differences between the two and each one is quite magnificent. Congratulations to the team at Hornby for producing such a fantastic model. Can see one of them making an appearance on the modular layout at Staplegrove in April. Looking forward to getting Clan Line when it arrives, provided I have managed to save up sufficient funds by then. You will not need to buy a huge rake of coaches for an original Merchant Navy to pull. In Steam Memories of the Salisbury to Exeter Central Line by Derek Philips,on page 42 there is photograph of 35006 Peninsular & Oriental near Crewkerne pulling a three car set in March 1950 - albeit not in the form modelled Hornby so far but I am sure we will see one like it modelled in the coming years. all the best Godfrey 3 Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 (edited) Those comparison picture above definitely show the need for a new Light Pacific Maybe some of the detail lacks a little finesse compared to Hornby's latest efforts but it's still a good model. I have twenty of them and I'd not be thinking of replacements, just additions. There are plenty of combinations that Hornby haven't yet covered. My non-rebuilt Bulleid light pacific priorities would be some wide-cab locos equipped with cut-down 4500 gallon tenders (ideally 34094 Mortehoe, 34106 Lydford and 34110 66 Squadron, the unique badge-less BB). Plus similarly badge-less examples that kept cut-down 5500 gallon tenders (34099 Lynmouth or 34102 Lapford - preferably both). Most of those will need a modified chassis with the correct later ash-pan; that off the rebuilt WC minus the Walschaerts would be a good starting point. Different tender bodies to widen the range of rebuilt locos would also be welcome, BR 5250 gallon to go with both sizes (34031 Torrington, 34059 Sir Archibald Sinclair and 35002 Union Castle for me, please). Plus a 5000 gallon cut-down just for the MN so I can finally get the rebuilt 1st Series MN I've always wanted, 35007 Aberdeen Commonwealth. Yes that is nine locos and if they all arrived tomorrow, I'd have the lot. The slush fund would just about stand it! Then we can start thinking about later-spec non-rebuilt MNs............... John Edited March 16, 2017 by Dunsignalling Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 Maybe some of the detail lacks a little finesse compared to Hornby's latest efforts but it's still a good model. I have twenty of them and I'd not be thinking of replacements, just additions. My non-rebuilt Bulleid light pacific priorities would be some wide-cab locos equipped with cut-down 4500 gallon tenders (ideally 34094 Mortehoe, 34106 Lydford and 34110 66 Squadron, the unique badge-less BB). Plus similarly badge-less examples that kept cut-down 5500 gallon tenders (34099 Lynmouth or 34102 Lapford - preferably both). Most of those will need a modified chassis with the correct later ash-pan; that off the rebuilt WC minus the Walschaerts would be a good starting point. Different tender bodies to widen the range of rebuilt locos would also be welcome, BR 5250 gallon to go with both sizes (34031 Torrington, 34059 Sir Archibald Sinclair and 35002 Union Castle for me, please). Plus a 5000 gallon cut-down just for the MN so I can finally get the rebuilt 1st Series MN I've always wanted, 35007 Aberdeen Commonwealth. Yes that is nine locos and if they all arrived tomorrow, I'd have the lot. The slush fund would just about stand it! Then we can start thinking about later-spec non-rebuilt MNs............... John Blasphemy - you've mentioned that dirty word again. I wish Andy Y would add it to the swear filter Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 (edited) Blasphemy - you've mentioned that dirty word again. I wish Andy Y would add it to the swear filter Which one, slush? While they are at it, the later ash-pans open up the possibility of 34011 Tavistock, 34043 Combe Martin and 34065 Hurricane in post-1952 condition, too....... Cut-down 4500g. tenders with early crest should get the collectors interested. Edited March 16, 2017 by Dunsignalling Link to post Share on other sites More sharing options...
mattingleycustom Posted March 16, 2017 Share Posted March 16, 2017 The rational for buying a P2 for my essentially BR layout is even thinner! No, no, that is eminently sensible, everyone should have a P2. Glenn Link to post Share on other sites More sharing options...
RMweb Gold RFS Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 (edited) You will not need to buy a huge rake of coaches for an original Merchant Navy to pull. In Steam Memories of the Salisbury to Exeter Central Line by Derek Philips,on page 42 there is photograph of 35006 Peninsular & Oriental near Crewkerne pulling a three car set in March 1950 - albeit not in the form modelled Hornby so far but I am sure we will see one like it modelled in the coming years. Also here for example, although there are no models (yet) of the coach set - https://mikemorant.smugmug.com/Trains-Railways-British-Isles/SR-and-BRS/Original-Bulleid-locomotives/i-tQqtJgr/A And here - https://mikemorant.smugmug.com/Trains-Railways-British-Isles/SR-and-BRS/Original-Bulleid-locomotives/i-MrFNWqL/A Edited March 16, 2017 by RFS Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 (edited) Also here for example, although there are no models (yet) of the coach set - https://mikemorant.smugmug.com/Trains-Railways-British-Isles/SR-and-BRS/Original-Bulleid-locomotives/i-tQqtJgr/A And here - https://mikemorant.smugmug.com/Trains-Railways-British-Isles/SR-and-BRS/Original-Bulleid-locomotives/i-MrFNWqL/A As the first Bulleid coaches built (in 1946) they are the obvious choice to go with early-post-war MNs. They'd be ideal and economical for Hornby, using the Maunsell underpinnings. John Edited March 16, 2017 by Dunsignalling 1 Link to post Share on other sites More sharing options...
Guest Midland Mole Posted March 16, 2017 Share Posted March 16, 2017 Unfortunately we received less than we had ordered.... We have now received the ones missing from our original delivery, so we did end up with the full amount we ordered. Alex 1 Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 Which one, slush? While they are at it, the later ash-pans open up the possibility of 34011 Tavistock, 34043 Combe Martin and 34065 Hurricane in post-1952 condition, too....... Cut-down tenders with early crest should get the collectors interested. The word that Hornby, very wisely didn't put on the box (UN-REBUILT or in your case non-rebuilt) Joking aside, looking at the chassis Hornby "may" have taken the Air-Smoothed Bulleid Light Pacific in account when designing it Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 (edited) The word that Hornby, very wisely didn't put on the box (UN-REBUILT or in your case non-rebuilt) Joking aside, looking at the chassis Hornby "may" have taken the Air-Smoothed Bulleid Light Pacific in account when designing it I've always hated "un-rebuilt" and, of course, "non-rebuilt" should only be used in relation to locos in air-smoothed condition after the rebuilding programme had commenced. To avoid confusing myself, I generally restrict its use to locos that were never rebuilt. Mind you, if the preservationists have their way with General Steam Navigation as intended , maybe "un-rebuilt" will finally acquire a legitimate meaning......... Thanks for the info on the rebuilt WC chassis, I've not yet undressed any of mine. John Edited March 16, 2017 by Dunsignalling Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 Having had a better look at the chassis, a number of parts are separate (aside from the usual suspects): Ashpan (screw behind gear tower) Rear pony truck (underneath - to allow for both the cast & fabricated versions) Lower parts of fairings (in-front of the cylinders) Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 My 21C3 arrived today and I could not resist a) fitting the details pack (front & rear buffer beam steps, cylinder drain pipes and steam / vacuum pipes), b) replacing the nameplates and smokebox roundel with etched replacements from Fox Transfers and taking a quick snap (hence the finger mark) on Canute Road Quay... For those interested the Hornby plates are separate fittings held on with three small lugs one in the middle of the main circle and one at each end of the crossbar 'Merchant Navy Class' lettering. They came off easily with a point of a scalpel blade slid underneath and twisted. The Fox Transfer plates are the same size and therefore fit over the holes left in the body side perfectly. I just affixed the Smokebox roundel straight over the Hornby one. I am still in two minds about forward dating her to the later top cowl and short smoke deflectors... 9 Link to post Share on other sites More sharing options...
Nimbus Posted March 16, 2017 Share Posted March 16, 2017 The coupling rods are exquisite, they need to be made a spare.. It's come to something when a RTR motion component could be a definite upgrade to a finescale etched kit! The Nim. 3 Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted March 16, 2017 RMweb Gold Share Posted March 16, 2017 My 21C3 arrived today and I could not resist a) fitting the details pack (front & rear buffer beam steps, cylinder drain pipes and steam / vacuum pipes), b) replacing the nameplates and smokebox roundel with etched replacements from Fox Transfers and taking a quick snap (hence the finger mark) on Canute Road Quay... 21C3_1.jpg 21C3_2.jpg For those interested the Hornby plates are separate fittings held on with three small lugs one in the middle of the main circle and one at each end of the crossbar 'Merchant Navy Class' lettering. They came off easily with a point of a scalpel blade slid underneath and twisted. The Fox Transfer plates are the same size and therefore fit over the holes left in the body side perfectly. I just affixed the Smokebox roundel straight over the Hornby one. I am still in two minds about forward dating her to the later top cowl and short smoke deflectors... Forward dating Graham? I think you need to go and a have a lie down in a darkened room, after an ice cold shower of course Link to post Share on other sites More sharing options...
Guest Midland Mole Posted March 16, 2017 Share Posted March 16, 2017 I am still in two minds about forward dating her to the later top cowl and short smoke deflectors... Nooooo, you cant take a knife to a work of art! Alex Link to post Share on other sites More sharing options...
Gilwell Park Posted March 16, 2017 Share Posted March 16, 2017 Hi. I have never really appreciated the finer points of the original Bulleid design. The matching curves behind the cylinders and the rear driving wheels, the way the front of the cab matches the front of the casing. I had always preferred the modified ( not rebuilt ) design with smoke deflectors, hood over the smoke box door, angled cab and simpler tender top. The model really shows how well designed, and detailed, the original was. Why did I not order one! Roger 1 Link to post Share on other sites More sharing options...
JSpencer Posted March 16, 2017 Share Posted March 16, 2017 Those comparison picture above definitely show the need for a new Light Pacific One could argue that the rebuilt Merchant Navy should jump the queue. Though I find the current light Bullieds and rebuilds good enough for me, especially after having only Wrenn and former Triang models prior to 2000 in RTR form! We've come a long way. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now