RMweb Gold john dew Posted July 4, 2017 RMweb Gold Share Posted July 4, 2017 Wow! I am quite breathless after that stream of updates. You have been busy. I do admire your display case.......I have one but it is not wide enough Cheers John Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 5, 2017 Author RMweb Premium Share Posted July 5, 2017 (edited) Thanks John, I have always found modelling to be calming and recuperative in times of turmoil. It can be tough to get started some days but as most of us know, it is very addictive. I am already looking forward to a black brushing session tonight in the brief hours between washing up and the 22:45 All Stations to Bed. Edited July 5, 2017 by M.I.B Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 5, 2017 Author RMweb Premium Share Posted July 5, 2017 (edited) . Edited July 5, 2017 by M.I.B Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 5, 2017 Author RMweb Premium Share Posted July 5, 2017 (edited) . Edited July 5, 2017 by M.I.B Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 5, 2017 Author RMweb Premium Share Posted July 5, 2017 (edited) Sorry - these three posts ended up here not on my Lining and logos post elsewhere. Edited July 5, 2017 by M.I.B Link to post Share on other sites More sharing options...
RMweb Gold The Fatadder Posted July 5, 2017 RMweb Gold Share Posted July 5, 2017 I thought 6971 was the first hawksworth tendered mod hall? Or was it released to traffic later than 64. For castles, there is a list of tender allocations in the book of the castles and also in GWR Collett castle class by Langston. I can have a quick look later if you would like, just tell me the number of the base model so I can narrow down my search. Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 7, 2017 Author RMweb Premium Share Posted July 7, 2017 (edited) I am immensely pleased to report that Phil "Mallard's" handi-work on the H57 12 wheel restaurant has arrived. I am incredibly pleased with the result. As per the photos a post or two back, he has done exacly as I requested ie the structural build only. It has gone into the "to do" box along with a pair of 12 wheel bogies which he has made up for the J12 Sleeper project also in the same receptacle. I will stick to my guns - (no comment!) and will not be tempted away from the workflow as promised many many pages ago. Once the current batch of engine work is finished and weathered, I will re-address the situation with the 5 full brakes which self destructed due to use/over use of Araldite. And I have added the following jobs to the list as pondered recently: 1. L10 underframe improvements and repaints (again). 2. All Austerity Brown coaches to receive orange lining (now purchased from Fox Transfers). (one or two already have this). 3. Oil burner tender to have more detail added. It does make me think that I could fill my spare time just in rolling stock improvements, and weathering......when am I ever to get to build "Shed 2" let alone the full NC? I have far more troublesome things to worry about! I will just enjoy what I have and hope that you can do similar. I hope that you are happy and healthy. Edited July 8, 2017 by M.I.B 1 Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 8, 2017 Author RMweb Premium Share Posted July 8, 2017 (edited) Some frothing and excitement elsewhere this week as the first of three armour carriers hits the Post Offices and couriers. This is the Oxford WARWELL "On Loan To GWR" which fits my period nicely, apart from it's finish. It is incredibly well detailed and decals are exquisite: But it's going to need a pile of weathering unless you are modelling May 1944..... The crossed chains are the correct way to lash armour, but I am not sure why the chains are secured on the lower portion of the bed. These will be disconnected and applied to the armour load ( more to follow). The chains would be a nice dark rust with a sheen from the waste engine oil, brush applied to keep them pristine. A regular (and very mucky) task for the soldiers tasked with loading and unloading these items. (been there, done it and got the dermititis.......) They certainly wouldn't be olive green and clean. The bed of this unit would have been covered in oil drips, and have lots of rust where the un padded tank tracks had scratched away the paint. From headstock to headstock. Given the heavy use these got leading upto and just after June '44, then the subsequent use in late 45 and into 46 bringing the armour home to depots and stores and main workshops, there would have been no time for paint or refurb. Not exactly sure what the bits in the accessories bag are - no doubt someone else will enquire and all will be expalianed before this come into my shop for work. But a great model. I am pleased. Since the announcement that these items were imminent I have noticed a rise in the sales numbers and prices for 1:76 model tanks . I am sure that they will settle down again soon. Shermans are popular as expected. I picked up a Crocodile pretty cheaply. As a gun tank it was out of service in my period, but in its assault weapon guise, it was used right into the 1950s in Korea. I will pick up a recent Hornby LOWMAC and do another LORIOT P conversion with it, so that the trailer for the Crocodile can be carried. Edited July 20, 2017 by M.I.B 4 Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 20, 2017 Author RMweb Premium Share Posted July 20, 2017 It has been a little while, and idle hands have been found things to do. The King from the "cheap" Bristolian set has been re-dated and awaits the King Bill 3 plates. All lower lining has gone to fit the period, and the shirt-button has been replaced with the "G**W" late logo. Coal, new beam number, crew etc and removal of the front coupling (and NEM pocket) are all the usual; mods done for NC locos. Photos once it is weathered. The early BR Grange is painted, and the tender was done in parallel with the King tender. So it is also in "The Cabinet" awaiting some traction. This is a late logo unlined engine, so it won't take long to arrive. The LOWMAC has arrived (I ended up buying a pair of unboxed ones as they were cheaper than a boxed one). They are already grey, and I have made the planking look a little more worn and weary. Left to do are lettering and some well placed engine oil stains from vehicles dripping whilst loaded. But the big news: I have given up on the "sellers from H3ll" and viewed a new vacant property just a few doors away from theirs. It is in serious need of work, and there is no room for NC just yet but the offer I made has been accepted. NC may be put aside for a while, but definitely not forgotten. I hope that you are happy and healthy. 1 Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 20, 2017 Author RMweb Premium Share Posted July 20, 2017 (edited) Reference the "bits and pieces" bag for the WARWELL. I have worked out that the round green pieces are the "feet" for the stabilizing jacks under each buffer. Perhaps another look into this tonight may shed more light - - I think a pair may be green (!!) vac hoses. I will report back............. Edited July 20, 2017 by M.I.B 1 Link to post Share on other sites More sharing options...
RMweb Gold The Fatadder Posted July 20, 2017 RMweb Gold Share Posted July 20, 2017 Have Oxford made an air braked version? The green pipes look rather a lot like air brake pipes to me, whereas the black look like vac brake pipes Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 20, 2017 Author RMweb Premium Share Posted July 20, 2017 (edited) Have Oxford made an air braked version? The green pipes look rather a lot like air brake pipes to me, whereas the black look like vac brake pipes I understand now that I have looked back at the picture. Looks to be an "either/or/ or nothing" solution. It would make more sense to issue one identical accessory pack regardless of the variant of WARWELL purchased. (Simplicity being one of the principles of logistics). I now believe that you (the buyer) has to research which one is most appropriate. Perhaps a simple note in the bag would have been appropriate? UPDATE - it seems the air hoses (not sure which these are) are a very late fitment to the WARWELL fleet. So I assume that vac hoses are correct for War Department period use. And what are the final pair of hoses for? (the shorter green pair of items). Edited July 20, 2017 by M.I.B Link to post Share on other sites More sharing options...
RMweb Gold The Fatadder Posted July 20, 2017 RMweb Gold Share Posted July 20, 2017 I now believe that you (the buyer) has to research which one is most appropriate. Perhaps a simple note in the bag would have been appropriate? UPDATE - it seems the air hoses (not sure which these are) are a very late fitment to the WARWELL fleet. So I assume that vac hoses are correct for War Department period use. And what are the final pair of hoses for? (the shorter green pair of items). I'm surprised that manufacturers still insist on supplying details without any information on where they go, its not exactly difficult at the very least to stick a diagram on your website and a paper copy in the box... Looking at the short pipe it rather has me stumped, unless its an alternate version of the air pipe which is intended for use with tension lock couplings. Either way, for your use in the late 40s you will only need to worry about fitting the vac pipe. Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 20, 2017 Author RMweb Premium Share Posted July 20, 2017 Thanks Rich. - Vac is the black one? Link to post Share on other sites More sharing options...
RMweb Gold The Fatadder Posted July 20, 2017 RMweb Gold Share Posted July 20, 2017 Thanks Rich. - Vac is the black one? That's the one Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted July 20, 2017 RMweb Premium Share Posted July 20, 2017 I understand now that I have looked back at the picture. Looks to be an "either/or/ or nothing" solution. It would make more sense to issue one identical accessory pack regardless of the variant of WARWELL purchased. (Simplicity being one of the principles of logistics). I now believe that you (the buyer) has to research which one is most appropriate. Perhaps a simple note in the bag would have been appropriate? UPDATE - it seems the air hoses (not sure which these are) are a very late fitment to the WARWELL fleet. So I assume that vac hoses are correct for War Department period use. And what are the final pair of hoses for? (the shorter green pair of items). They look as though they're supposed to represent the hoses and inlet valves connecting the vacuum cylinders to the vacuum pipe. Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 20, 2017 Author RMweb Premium Share Posted July 20, 2017 (edited) They look as though they're supposed to represent the hoses and inlet valves connecting the vacuum cylinders to the vacuum pipe. Thanks, Now that (with assistance) the contents have been identified, I will pop open the bag tonight. It will give me a break from lettering/numbering up the LORIOT Ps. And of course I will report back. Edited July 20, 2017 by M.I.B 1 Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 21, 2017 Author RMweb Premium Share Posted July 21, 2017 I didn't start in the LORIOT P letters as I was researching numbers and got sidetracked in the railway book pile. WARWELL bits bag popped open tho: and comments are on the Oxford page under the WARWELL thread. I won't run two threads simultaneously on the same thing but the synopsis is: 1. The hoses clip under/behind the buffer beam, but foul the tension lock coupling. There are cuts, places to mount both pairs simultaneously. 2. Two pairs of safety chains would fit on and perhaps should have been included. 3. The feet are stowed somewhere for travel. Where? One small step for Man..........one giant leap for Modelling Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted July 21, 2017 RMweb Premium Share Posted July 21, 2017 I didn't start in the LORIOT P letters as I was researching numbers and got sidetracked in the railway book pile. WARWELL bits bag popped open tho: and comments are on the Oxford page under the WARWELL thread. I won't run two threads simultaneously on the same thing but the synopsis is: 1. The hoses clip under/behind the buffer beam, but foul the tension lock coupling. There are cuts, places to mount both pairs simultaneously. 2. Two pairs of safety chains would fit on and perhaps should have been included. 3. The feet are stowed somewhere for travel. Where? One small step for Man..........one giant leap for Modelling A. Podiatrist Esq. told me to tell you that Paul Bartlett (he of amazing wagons pictures website) may well know this. I'd say in a little cage/box under the body somewhere? Philth Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 21, 2017 Author RMweb Premium Share Posted July 21, 2017 If that's the case Phil, they will join the zillions of other unfitted parts and weird off cuts that go in my "scrap" bag. Then one-day I will pile them all up, glue them in heaps using PVA and water (like ballasting) and paint them in rusty hues. 1 Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 25, 2017 Author RMweb Premium Share Posted July 25, 2017 LORIOT Ps were lettered and numbered last night and a pair of Dapol LMS 12 ton vans had wheels and roofs appropriately painted. Nothing exciting, but photos to follow when they get the airbrush grot treatment. Longford Grange had its smoke-box, steam pipes and chimney brushed with a 50/50 mix of matt black and black Metalcote, and then a light polish with a finger tip. This gives a good "warm metal" look to these areas. Most of my engines get this treatment now. And I am sure that retrospective painting on the others will follow one day. With hopefully 4-6 week to move-in day, it's time to take stock of the work in the Projects box. The Grange will be finished this weekend - the cab needs a refit, crew need painting and then re-assembly. I am not going to make a start on the 3 tenders for the weedkiller train, so I may set myself a limit of correcting the Oxford WARWELL (chains, rust to the deck, weathering and buffer detailing) and building the load for it. But the projects box and modelling tools won't be going into storage, and are firmly on the list to be taken to the new place from Day 1. I hope that you are all happy and healthy. 2 Link to post Share on other sites More sharing options...
RMweb Gold john dew Posted July 26, 2017 RMweb Gold Share Posted July 26, 2017 That's a great idea to reproduce heat sheen.......I use Vallejo acrylics so I will experiment with Matt black and a smaller proportion of steel. What do you recommend for the cylinder casings (not sure if that is correct) Regards Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 26, 2017 Author RMweb Premium Share Posted July 26, 2017 John, I also use this mix on the cylinder covers. I have a tin ready mixed 50/50 so that I don't waste too much - no need to put it on a card pallette, mix the two and throw half of it away. Sorry that I didn't make that clear. Then the running gear gets a brown/rust/soot airbrushing which makes the cyliners less "shiny" than the smoke box and steam pipes. You can still see the effect tho. Best wishes Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted July 27, 2017 Author RMweb Premium Share Posted July 27, 2017 I have an issue with the cab glazing on the Grange. I have tried Laserglaze and Peters Spares for replacements/alternatives but to no avail. Any suggestions gratefully received........... Thanks. Link to post Share on other sites More sharing options...
RMweb Gold The Fatadder Posted July 27, 2017 RMweb Gold Share Posted July 27, 2017 I have an issue with the cab glazing on the Grange. I have tried Laserglaze and Peters Spares for replacements/alternatives but to no avail. Any suggestions gratefully received........... Thanks. I'd suggest cutting and filing a clear cd case to size. Takes a bit of trial and error, but gives a good end result. I have a hall with cloudy (varnish damaged) windows on which I need to do it, but have done the same in the past on a Hornby 14xx Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now