RMweb Gold NHY 581 Posted March 2, 2021 Author RMweb Gold Share Posted March 2, 2021 Morning all. A quick post if I may to say thank you for all who have clicked 'like' etc on the write up for scruffy station building, or made comment. Its all appreciated and gratefully received. As alluded to, the next victim will be the engine shed. Still giving this a bit of thought but may well knuckle down to it later. First of all there is the small matter of a days work to attend to........ Rob. 6 1 6 Link to post Share on other sites More sharing options...
bgman Posted March 2, 2021 Share Posted March 2, 2021 14 hours ago, chuffinghell said: I use Vallejo varnish in the airbrush but I wondered if the humbrol matt gave a tougher finish as I imagine the Vallejo stuff wouldn’t stand up to much abuse (especially with a fibreglass pencil) If I may, I've used both Vallejo and AK varnishes through my airbrushes, usually on a low pressure to mist over powders and found them to be just as resilient. I was put off using Humbrol varnish from the bottle when I found very inconsistent results a few years ago, even the model shop who stocked it put a notice below the bottles warning of such problems. I have however had good results from the spray can as per Rob. I have also had really good results from the Army Painter Anti Shine Matt Varnish as used by wargamers on their "toy soldiers" . G 4 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted March 2, 2021 RMweb Gold Share Posted March 2, 2021 14 hours ago, Ighten said: Im guessing your doing this indoors (the spraying from aerosol) - there's only so many times I can get away with saying the Rayburns juts been serviced... I used to spray indoors, but stopped doing that a few years ago, partly due to the smell and disapproval from CTMK, but also due to the build up of residue from paint particles on surfaces such as the window sill. I've been spraying in the shed now ever since. I can spray in the colder weather, but putting the warm air blower on in the shed and leaving it for 20 minutes or so and also by ensuring that the paint is not cold (which it won't be, because that is not stored in the shed). I'm hoping that the days of spray painting in the shed will come to an end, though, as I want to purchase a good quality extractor booth at some stage. 2 1 Link to post Share on other sites More sharing options...
bgman Posted March 2, 2021 Share Posted March 2, 2021 2 hours ago, Captain Kernow said: as I want to purchase a good quality extractor booth at some stage. Money well spent I say. 1 2 Link to post Share on other sites More sharing options...
RMweb Gold Mick Bonwick Posted March 2, 2021 RMweb Gold Share Posted March 2, 2021 All this exchange of views about spraying has prompted me to invade somebody else's topic (sorry, Rob) and spout forth. I have been using airbrushes and aerosols for some 9 or so years now, both at home and for courses, workshops and demonstrations. During that time I have come across many views and ideas about what is and is not safe/good/recommended. I have done much investigation on the topic, not least because I have to consider other people's health as well as my own. The following summary should help to give a balanced and informed view of the topic. Paints consist of pigment and carrier. The carrier evaporates and the pigment remains. Airbrushes and aerosols work by atomising paint, so there will be a cloud of mostly invisible particles around the work area and it is not a good idea to breathe them in. Whether the paint is enamel, acrylic, cellulose or any other type, those particles will be present. Enamel and cellulose paints (solvent based) have carriers that you can smell, so it is fairly easy to detect their presence. Many (not all) acrylic paints have carriers that do not smell, so their presence is difficult to detect. Smell or no smell, the paint particles will be there! The solvents will probably give you a headache, the paint particles will harm your lungs. The most convenient way to deal with the paint particles is to use the airbrush or aerosol outside. This is not the most practical of situations for most modellers, especially in this wonderful country of ours. There are two ways of stopping the paint particles from going up your nose when using an airbrush indoors: A mask that filters out particles down to 5 microns An extraction unit or spray booth that either filters particles or expels them from the area around your face. As mentioned by my Captain, the presence of the particles can eventually be seen on top of everything in the room where the spraying was done, proof enough that you have been breathing them in. If your spray booth is not up to the mark, that layer will be there as well. Most hobby spray booth filters will not cope with aerosol paints. They produce paint particles too thick and fast for these filters to remove them from the airflow. The result is that the filters will clog up and the particles produced will simply bounce back up your nose. There you have it. If you are going to atomise paint, make sure it doesn't go up your nose. You will die! 4 1 11 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted March 2, 2021 RMweb Gold Share Posted March 2, 2021 Mick, That's very helpful. In our local group, vented booths by BenchVent have been recommended as being able to extract 100% (or as close as makes no difference) of all particles. I was planning on getting one of these - https://benchvent.com/shop/bv300s-d-a3-extraction-unit/ 2 1 Link to post Share on other sites More sharing options...
RMweb Gold Mick Bonwick Posted March 2, 2021 RMweb Gold Share Posted March 2, 2021 A very good choice, my Captain, that's exactly the one that I use at home. 3 1 1 2 1 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted March 2, 2021 Author RMweb Gold Share Posted March 2, 2021 Well worth it I would say. I live in hope that I will have a dedicated workshop area at some point and not be reliant on the dining table, garage and downstairs toilet. Rob. 9 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted March 2, 2021 Author RMweb Gold Share Posted March 2, 2021 By the way, we appear to have tottered onto 400 pages. Good effort all round. Rob. 6 1 11 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post NHY 581 Posted March 2, 2021 Author RMweb Gold Popular Post Share Posted March 2, 2021 (edited) And here we were five years ago...... Sheep Lane under construction. 110cm x 26cm. Rob. Edited April 5, 2022 by NHY 581 25 1 Link to post Share on other sites More sharing options...
Popular Post durham light infantry Posted March 2, 2021 Popular Post Share Posted March 2, 2021 34 minutes ago, NHY 581 said: And here we were five years ago...... Sheep Lane under construction. 110cm x 26cm. Rob. Still going strong Rob, although she has had some strange visitors recently... And finally combining your first and latest endeavours... 27 2 Link to post Share on other sites More sharing options...
RMweb Gold Gilbert Posted March 2, 2021 RMweb Gold Share Posted March 2, 2021 28 minutes ago, durham light infantry said: Still going strong Rob, although she has had some strange visitors recently... And finally combining your first and latest endeavours... All looks perfectly normal to me.... 1 3 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted March 3, 2021 Author RMweb Gold Share Posted March 3, 2021 11 hours ago, durham light infantry said: Still going strong Rob, although she has had some strange visitors recently... And finally combining your first and latest endeavours... Morning Mike. Its good to see SL still in use and being enjoyed. SL was the first layout I would ever refer to as finished and a nice way of coming back to a hobby that was really dead in the water to me. It was also built at a time when there was a great deal going on and at times, became a very welcome diversion. I learnt so much building it, including how much fun this hobby is and have a bit of confidence to try things out. Simply have a go. It was also the very first time I built a layout to exhibit and in fact a little under twelve months after it was started, I did exhibit it and I was quite taken aback by peoples reaction to what I always describe as a bit of track nailed to a shelf. I have often thought about repeating the exercise and applying what I have learnt since then. One day maybe. Rob. 8 6 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post NHY 581 Posted March 3, 2021 Author RMweb Gold Popular Post Share Posted March 3, 2021 (edited) Evening all. A touch of Peckettry this evening. Edited March 3, 2021 by NHY 581 Clarity. 28 1 5 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post NHY 581 Posted March 3, 2021 Author RMweb Gold Popular Post Share Posted March 3, 2021 24 7 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post NHY 581 Posted March 4, 2021 Author RMweb Gold Popular Post Share Posted March 4, 2021 (edited) Morning all. Another view or three of the Pesky Peckett..... Edited March 4, 2021 by NHY 581 Sausage hooves 29 2 6 Link to post Share on other sites More sharing options...
keefr2 Posted March 4, 2021 Share Posted March 4, 2021 Lovely little engine Rob, the weathering really is superb! Never tire of seeing pics of the little guy! Keith 3 1 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted March 5, 2021 Author RMweb Gold Share Posted March 5, 2021 Evening all. We have a new kid on the block in the form of a new body acquired for my PLA Peckett. Unfortunately it arrived damaged with the rear cabsheet pushed in, handrail snapped, brake standard pushed forwards and regulator bent. Much straightening out later here we have it. The handrails are a bit rough but I shall give them a link of paint and see how it is. I can alway replace with wire. Wheels to be repainted, new cylinders on order......oh and I contrived to squash the whistle being ham hoofed. However, I have a spare Sentinel whistle in stock. A nice addition to the roster. Rob. 16 1 Link to post Share on other sites More sharing options...
MrWolf Posted March 5, 2021 Share Posted March 5, 2021 (edited) I thought for a minute you had had a visit from vandals who had polished your Peckett (ooer missus and all that...) It does look very nice and I am very tempted to own one, but I'm a little confused still about the condition. In this house we like to buy old broken things that may have come from a battlefield in Slovenia or a lock up garage in Carnforth. But there's a preponderance of things on RMWeb that seem to be specially pre broken from new? Edited March 5, 2021 by MrWolf 6 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted March 5, 2021 Author RMweb Gold Share Posted March 5, 2021 (edited) Quite. This little chap arrived thus and required a bit of reassembly. But the reality is that by the time I have had it on the cutting mat and added a bit of distress....it will probably look a lot worse..... Edited March 5, 2021 by NHY 581 11 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted March 5, 2021 RMweb Gold Share Posted March 5, 2021 27 minutes ago, MrWolf said: It does look very nice and I am very tempted to own one Me too, I do like the range of industrial locos now available, especially the Pecketts and Hatton’s Barclay’s I can see myself doing an industrial layout at some point in the future..... ....Once Warren is further along of course 2 2 Link to post Share on other sites More sharing options...
MrWolf Posted March 5, 2021 Share Posted March 5, 2021 Oh dear, is your letterbox sited on the crossbar of a rugby goalpost? It looks like it was delivered in a drop goal by the Pontypool centre forward... I take it that you already had a chassis? 1 1 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted March 5, 2021 Author RMweb Gold Share Posted March 5, 2021 16 minutes ago, MrWolf said: Oh dear, is your letterbox sited on the crossbar of a rugby goalpost? It looks like it was delivered in a drop goal by the Pontypool centre forward... I take it that you already had a chassis? You'd like to think wouldn't you.......Nope this is as delivered by hand courtesy of Royal Mail this very afternoon. I suspect the damage was caused when the body was replaced into the plastic cradle. The ends are designed to abut the cabsheet. However, it won't sit in the same way as when on the chassis. There was no damage to the outer packaging or the box inside so we can draw our own conclusions. The seller has refunded a proportion of the cost so its actually worked out okay. But I was a tad miffed. As for chassis, yes, I had a blue Peckett and fancied a change of clothes. They really are lovely little locos and I prefer them to the Hattons Andrew Barclay. They will run well but can need a tweak or two. Sheep Dip therefore has an additional Peckett.....and I can see a couple more arriving before the year is out.... There will of course be a bit of weathering involved With this little chap......just saying... Rob. 7 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted March 6, 2021 RMweb Premium Share Posted March 6, 2021 Well, I shall (ab)use the privilege of making the 10,000th post by saying that I reckon you've sorted out those problems very nicely, Rob. If you hadn't said I wouldn't have known. 1 4 Link to post Share on other sites More sharing options...
MrWolf Posted March 6, 2021 Share Posted March 6, 2021 In that case, perhaps I shall pinch the palindrome post of 10001to agree with you and say that if Rob had simply announced that he had a new loco, I too would have been none I wiser. 3 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now