RMweb Gold Stubby47 Posted September 30, 2019 RMweb Gold Share Posted September 30, 2019 Sounds like a good weekend. I'm guessing the garden / P4 / etc layouts were at-home varieties, so you all made the trips between various houses in the area? Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted September 30, 2019 Author RMweb Premium Share Posted September 30, 2019 1 minute ago, Stubby47 said: Sounds like a good weekend. I'm guessing the garden / P4 / etc layouts were at-home varieties, so you all made the trips between various houses in the area? That right Stu. The usual arrangement is for a few local members to open their layouts for visiting and we all troop round the circuit during the morning, finishing up with lunch before everyone goes their different ways. Sometimes, although not this year, we have one or two portable layouts set up at the Convention itself and also sometimes we have two or three people's layouts set up at one member's house, although again not this year. 2 3 Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted September 30, 2019 RMweb Gold Share Posted September 30, 2019 It sounds very civilised. 3 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted September 30, 2019 RMweb Premium Share Posted September 30, 2019 1 hour ago, Stubby47 said: It sounds very civilised. Hi Stu Are you sure about that comment? Remember which country he lives in. 1 2 Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted September 30, 2019 RMweb Gold Share Posted September 30, 2019 19 minutes ago, Clive Mortimore said: Hi Stu Are you sure about that comment? Remember which country he lives in. I wasn't going to mention the rugby...., oh, I just have. 1 4 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 1, 2019 Author RMweb Premium Share Posted October 1, 2019 23 hours ago, Stubby47 said: It sounds very civilised. Of course! It is, after all, the British Railway Modellers of Australia, don't you know, old fruit? 1 2 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted October 1, 2019 RMweb Premium Share Posted October 1, 2019 13 minutes ago, St Enodoc said: Of course! It is, after all, the British Railway Modellers of Australia, don't you know, old fruit? But weren't the Botany Bay Cons First Fleeters also British? 1 2 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 1, 2019 Author RMweb Premium Share Posted October 1, 2019 23 minutes ago, Clive Mortimore said: But weren't the Botany Bay Cons First Fleeters also British? For the most part, yes. https://en.wikipedia.org/wiki/First_Fleet#People 1 Link to post Share on other sites More sharing options...
chesterfield Posted October 2, 2019 Share Posted October 2, 2019 Young Mr Mortimore, Please understand in Australian Polite Society, it is a badge of honour to be able to trace your ancestry to the First or Second Fleets and a mark up if they were convicts not guards. I hasten to add mine came out in about 1929 3 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 9, 2019 Author RMweb Premium Share Posted October 9, 2019 Another weekend away, this time in the Land of the Long White Cloud, which certainly lived up to its name (although to be honest the cloud was grey rather than white). We went to stay with my old friend and colleague hongkongmike of this parish and his wife at their new home a couple of hours north of Auckland. Now that the house is finished, he is turning his attention to his dream retirement project, Ferryhill MPD in 00 gauge and set in the early 1960s. As an Aberdonian he has strong connections with the depot from that time and is building it to scale size with a double track main line round the rest of the room. I look forward to seeing it in operation next time we visit. 6 Link to post Share on other sites More sharing options...
Jack P Posted October 9, 2019 Share Posted October 9, 2019 Be glad you weren't flying into Wellington, although I think it's been bad up and down the country. Always exciting to hear of more NZ based layouts - Do you know if he will be starting a thread on here? 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 9, 2019 Author RMweb Premium Share Posted October 9, 2019 14 minutes ago, Jack P said: Be glad you weren't flying into Wellington, although I think it's been bad up and down the country. Always exciting to hear of more NZ based layouts - Do you know if he will be starting a thread on here? He's not very active on RMweb but you never know. 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted October 9, 2019 RMweb Premium Share Posted October 9, 2019 Thought of you last night as I had a pint of Harviestown Bitter and twisted in the Sheeps Heid... Baz 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 9, 2019 Author RMweb Premium Share Posted October 9, 2019 2 minutes ago, Barry O said: Thought of you last night as I had a pint of Harviestown Bitter and twisted in the Sheeps Heid... Baz Sunday lunch was here: https://www.sawmillbrewery.co.nz/ As I wasn't driving, I decided to try a Tasting Tray of five draught beers, all brewed on the premises and all excellent. 2 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted October 9, 2019 RMweb Premium Share Posted October 9, 2019 I see why you had a tasting tray.. what is with this need to brew very strong beers??? Looks interesting though. We stayed near the beer cooperative last time we visited Aukland. Baz 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 9, 2019 Author RMweb Premium Share Posted October 9, 2019 (edited) 12 hours ago, Barry O said: I see why you had a tasting tray.. what is with this need to brew very strong beers??? Looks interesting though. We stayed near the beer cooperative last time we visited Aukland. Baz Ducking for cover, I'd say that it's because when they're served freezing cold they need to be strong to have any flavour at all. Several years ago my boss told me there was an Australian-British Chamber of Commerce meeting that evening. He had another engagement so would I like to go instead. I hummed and hawed until he mentioned that it was at the James Squire brewery - "Oh, all right then". Chatting to the head brewer after the tour, I said that the beers were very good but would be even better if they were served at room temperature. He agreed, but said that if he did that he would never sell any in Australia. Edited October 9, 2019 by St Enodoc 2 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted October 9, 2019 RMweb Premium Share Posted October 9, 2019 I once managed to get a farmer and his son to try the very nice beer in a bar in Melbourne once it had warmed up. Christ..that tastes lovely he commented on It was under the Ovolo apartments just close to China Town. Excellent Haggis, neaps and Tatties as a starter tonight..but no malt to go with them.. Baz 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 9, 2019 Author RMweb Premium Share Posted October 9, 2019 1 minute ago, Barry O said: I once managed to get a farmer and his son to try the very nice beer in a bar in Melbourne once it had warmed up. Christ..that tastes lovely he commented on It was under the Ovolo apartments just close to China Town. Excellent Haggis, neaps and Tatties as a starter tonight..but no malt to go with them.. Baz On our way to our host's home on Saturday, we stopped at the New World supermarket at Warkworth which is the only place he knows north of Auckland that sells English beer. We helped him to replenish his stocks of bottled Old Peculier, Spitfire, Landlord, Boltmaker and Hobgoblin. 2 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 13, 2019 Author RMweb Premium Share Posted October 13, 2019 Back to work on the layout today. The first job was to fit some floating plastic timbers and also some functional copperclad ones to maintain the gauge where otherwise unsupported lengths of rail could wiggle around a bit. Then I fitted the operating wire loops to the tiebars, followed by the nine point motors. Finally for today I screwed a chocolate-block connector underneath the baseboard close to each of the point motors, making sure I left enough room for droppers and feeders. That was a good convenient point to stop, so I did. No photos as there's nothing to see that hasn't been seen before. During tonight's rugby I will make up some more droppers ready to start wiring next weekend, when the sequence will be: - connect the point motors to the accessory bus, program them and test them with a throttle. - install the droppers and track feeders. - connect the frogs to the point motors. - test the points and new track with a loco and some stock. - program the Mini Panel and the additional command station macro - test the routes from the Mini Panel. I doubt that I'll get that all done in a single session but we'll see how we go. 8 1 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted October 13, 2019 RMweb Premium Share Posted October 13, 2019 2 hours ago, St Enodoc said: Back to work on the layout today. The first job was to fit some floating plastic timbers and also some functional copperclad ones to maintain the gauge where otherwise unsupported lengths of rail could wiggle around a bit. Then I fitted the operating wire loops to the tiebars, followed by the nine point motors. Finally for today I screwed a chocolate-block connector underneath the baseboard close to each of the point motors, making sure I left enough room for droppers and feeders. That was a good convenient point to stop, so I did. No photos as there's nothing to see that hasn't been seen before. During tonight's rugby I will make up some more droppers ready to start wiring next weekend, when the sequence will be: - connect the point motors to the accessory bus, program them and test them with a throttle. - install the droppers and track feeders. - connect the frogs to the point motors. - test the points and new track with a loco and some stock. - program the Mini Panel and the additional command station macro - test the routes from the Mini Panel. I doubt that I'll get that all done in a single session but we'll see how we go. I am nearly as organised. I walk in to the play room and think what needs doing then decide I would like a model of so and so and commence building it or just run trains. It has been known for me to actually do what I plan to do. It is a hobby after all. 5 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 13, 2019 Author RMweb Premium Share Posted October 13, 2019 42 minutes ago, Clive Mortimore said: It is a hobby after all. The key to it all. 6 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted October 13, 2019 RMweb Premium Share Posted October 13, 2019 (edited) Last night I went into the Train Set room to wire up the remaining signals. Well I ran various Bachy and Heljan 47s on the front of a couple of my unfinished cut and shut trains. While they were whizzing around I converted two Lima class 117 DMBSs into DMSs and a center coach into a TC suitable for a class 116. The plan is to make one 3car set into a class 116 and the other into a class 118. The Driving Motor Second of the future class 118. I am going to build up the headcode box as the Lima model is slightly too small. See Sheff Ex for more photos. Edited October 13, 2019 by Clive Mortimore missing n 5 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 13, 2019 Author RMweb Premium Share Posted October 13, 2019 Just watched the final pool game at RWC 2019 and by crikey it was a cracker. I'll need the rest of the week to get my breath back before the quarter-finals. No spoilers... 4 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 14, 2019 Author RMweb Premium Share Posted October 14, 2019 Wishlist poll votes submitted. I've gone for the usual suspects - Toplights, Insixfish van, gas turbines, Swindon cross-country DMU and a few others. Seems like pretty much the same votes as last year except for the Hornby Big Prairie. 1 2 3 Link to post Share on other sites More sharing options...
RMweb Premium Chamby Posted October 14, 2019 RMweb Premium Share Posted October 14, 2019 11 hours ago, St Enodoc said: Wishlist poll votes submitted. I've gone for the usual suspects - Toplights, Insixfish van, gas turbines, Swindon cross-country DMU and a few others. Seems like pretty much the same votes as last year except for the Hornby Big Prairie. Funny that, I found myself requesting the same things as last year, too. Still the same gaps in my project... 2 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now