DCB Posted February 12, 2017 Share Posted February 12, 2017 (edited) Has anyone measured the the maximum speed of the model loco?Hattons 14XX on 12 volts 60 mph, on max power 80 mph, minimum speed limited by my uneven track, around 2mph. It runs very sweetly at a scale 25mph Based on three different locos The Hornby 14XX does over 100 mph and does not run smoothly at any speed, though it does limp along at a scale 10 mph. The Bachmann 64XX is slightly faster than the Hattons 14XX as is the the Bachmann 57XX and the Bachmann 8750 is much faster. Timed by stopwatch. over 80ths of a scale mile. Edited February 12, 2017 by DavidCBroad 2 Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted February 13, 2017 RMweb Gold Share Posted February 13, 2017 If the Hattons 14xx tops out at a scale 80mph, and people reckon they could achieve that on the Chalford autos, then it sounds as though the gearing is about right, with Bachmann 64xx and 57xx being not too far out, Hornby 14xx is well over the top and is not geared to do itself any favours given it's well known other problems, and the Baccy 8750 running too fast as well for some inexplicable reason; it's not as if it is more aerodynamic than the 57xx. None of which matters if the running is smooth, the starting and stopping not jerky, and the operator not too heavy handed... Link to post Share on other sites More sharing options...
Miss Prism Posted February 13, 2017 Share Posted February 13, 2017 The reported speed of the autos going down Chalford bank seems to go up by 1mph per year... Link to post Share on other sites More sharing options...
RMweb Gold tomparryharry Posted February 13, 2017 RMweb Gold Share Posted February 13, 2017 The reported speed of the autos going down Chalford bank seems to go up by 1mph per year... Just getting used to the route..... Link to post Share on other sites More sharing options...
KGV Posted February 13, 2017 Share Posted February 13, 2017 I believe that the next batch are now in as I have just received an email notifying me that my pre-order for H1401 Class 48xx 0-4-2T 4825 in GWR Unlined green with Great Western lettering has been processed. Link to post Share on other sites More sharing options...
Coppercap Posted February 13, 2017 Share Posted February 13, 2017 (edited) I believe that the next batch are now in as I have just received an email notifying me that my pre-order for H1401 Class 48xx 0-4-2T 4825 in GWR Unlined green with Great Western lettering has been processed.Me too! Edited February 13, 2017 by Coppercap Link to post Share on other sites More sharing options...
rembrow Posted February 13, 2017 Share Posted February 13, 2017 Four versions have arrived. In addition to above, 1400 class in BR unlined green and 2 5800 class in BR lined black and unlined black Link to post Share on other sites More sharing options...
spikey Posted February 13, 2017 Share Posted February 13, 2017 I have what amounts to a concealed loop on my layout, the ends of which are of necessity formed from Peco ST220 No 1 radius standard curves i.e. approx 15" radius. Am I correct in assuming that the Hattons 14XX wouldn't be happy running round them? Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted February 13, 2017 RMweb Gold Share Posted February 13, 2017 The reported speed of the autos going down Chalford bank seems to go up by 1mph per year... Stop watches ain't what they used to be. Just getting used to the route..... Actually, I blame decimal currency. Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted February 13, 2017 RMweb Gold Share Posted February 13, 2017 The reported speed of the autos going down Chalford bank seems to go up by 1mph per year... While I agree with your sentiment there seems to be a slight misunderstanding on your part as according to popular folklore these speeds were achieved going up the bank Link to post Share on other sites More sharing options...
RMweb Gold gwrrob Posted February 13, 2017 RMweb Gold Share Posted February 13, 2017 Four versions have arrived. In addition to above, 1400 class in BR unlined green and 2 5800 class in BR lined black and unlined black It looks like they've saved the weathered versions till last then. Link to post Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted February 13, 2017 RMweb Gold Share Posted February 13, 2017 It looks like they've saved the weathered versions till last then. Indeed Robin...the very examples that appeal to me.Saving the best till last. Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted February 13, 2017 RMweb Premium Share Posted February 13, 2017 It looks like they've saved the weathered versions till last then. They're the ones I'm looking forward to the most 1 Link to post Share on other sites More sharing options...
rembrow Posted February 13, 2017 Share Posted February 13, 2017 It looks like they've saved the weathered versions till last then. Looking at the Hattons site, there are 3 pristine condition versions still to come, they are showing with 1 of the weathered versions (H1402) as expected on or after 10th March. The rest of the weathered versions are showing as expected on or after 31 March Link to post Share on other sites More sharing options...
DCB Posted February 14, 2017 Share Posted February 14, 2017 The reported speed of the autos going down Chalford bank seems to go up by 1mph per year... The Auto trains raced the LMS expresses on the near level track between Standish Junction and the divergence of the LMS line from the GW line towards Gloucester, not down Chalford. I have what amounts to a concealed loop on my layout, the ends of which are of necessity formed from Peco ST220 No 1 radius standard curves i.e. approx 15" radius. Am I correct in assuming that the Hattons 14XX wouldn't be happy running round them? I didn't think to test if the 14XX goes around a 1st radius curve, I will try and get some on Thursday and give it a try, maybe I could even get some 13 " radius Triang Standard track and really give it something to think about. Link to post Share on other sites More sharing options...
nigel newling Posted February 14, 2017 Share Posted February 14, 2017 The Auto trains raced the LMS expresses on the near level track between Standish Junction and the divergence of the LMS line from the GW line towards Gloucester, not down Chalford. As a youngster living near Cheltenham I distinctly remember the Standish races - in both directions. The 14XXs always won, beating both Jubilees and Peaks. The other race was the Panniers from Malvern Road v the LMS from Lansdown. Again always a GW win but sabotaged by the Tramway Junction bobby (LMS) letting his train in to Eastgate ahead of the GW train into Central. 3 Link to post Share on other sites More sharing options...
RMweb Gold ROSSPOP Posted February 14, 2017 RMweb Gold Share Posted February 14, 2017 Me too! Ha Ha ........ Me too..... Pre-ordered April 2015........ Cancelled December 2015...... Sold all my 4mm stuff December 2016... but mine still arrives tomorrow !!!!!! You can never escape the GWR inquisition !!!!!! Link to post Share on other sites More sharing options...
RMweb Premium melmerby Posted February 14, 2017 RMweb Premium Share Posted February 14, 2017 (edited) I believe that the next batch are now in as I have just received an email notifying me that my pre-order for H1401 Class 48xx 0-4-2T 4825 in GWR Unlined green with Great Western lettering has been processed. Likewise, packed and tracking number issued. Keith Edited February 14, 2017 by melmerby Link to post Share on other sites More sharing options...
Coppercap Posted February 14, 2017 Share Posted February 14, 2017 Ha Ha ........ Me too..... Pre-ordered April 2015........ Cancelled December 2015...... Sold all my 4mm stuff December 2016... but mine still arrives tomorrow !!!!!! You can never escape the GWR inquisition !!!!!! Well, if you don't want it, send it on to me. It'll then technically be secondhand mind, but not yet commanding a premium "discontinued, no longer available" price! Link to post Share on other sites More sharing options...
RMweb Gold ROSSPOP Posted February 14, 2017 RMweb Gold Share Posted February 14, 2017 nice try Coppercap!!! but I hav`nt cancelled my Kernow GWR steam railcar pre-order so she will eventually have a playmate. I`ll just have to get some of that new Peco bullhead track now................ 1 Link to post Share on other sites More sharing options...
gismorail Posted February 15, 2017 Share Posted February 15, 2017 Purchased a 14xx 1470 and a Bachmann auto coach from Hattons yesterday whilst browsing the shelves.........a very impressive model loco has been produced here as I'm sure most on this forum would agree. Well done to Dave Jones and Hattons for developing this much sort after model and lets face it ..not one of the more straight forward prototypes to reproduce at the end of the day .... Whilst at a friends last night I took the opportunity to take some photographs that I would like to share with you all .........been a bit scarce for some reason from this forum .... pics that is . Going fast I believe so I would'nt hang around if you fancy one Purchased a 14xx 1470 and a Bachmann auto coach from Hattons yesterday whilst browsing the shelves.........a very impressive model loco has been produced here as I'm sure most on this forum would agree. Well done to Dave Jones and Hattons for developing this much sort after model and lets face it ..not one of the more straight forward prototypes to reproduce at the end of the day .... Whilst at a friends last night I took the opportunity to take some photographs that I would like to share with you all .........been a bit scarce for some reason from this forum .... pics that is . Going fast I believe so I would'nt hang around if you fancy one 12 Link to post Share on other sites More sharing options...
gismorail Posted February 15, 2017 Share Posted February 15, 2017 what the hell happened there ......well were short of photographs Link to post Share on other sites More sharing options...
RMweb Premium melmerby Posted February 15, 2017 RMweb Premium Share Posted February 15, 2017 what the hell happened there ......well were short of photographs You could edit out the second copy. Keith Link to post Share on other sites More sharing options...
coachmann Posted February 15, 2017 Share Posted February 15, 2017 Someone has bought me one as a present so I am really looking forward to seeing which version will arrive. Yup, it's a little 4mm/00 loco, but ve haff leetle shelf above PC for such things.... Link to post Share on other sites More sharing options...
sp1 Posted February 15, 2017 Share Posted February 15, 2017 Someone has bought me one as a present so I am really looking forward to seeing which version will arrive. Yup, it's a little 4mm/00 loco, but ve haff leetle shelf above PC for such things....I'd be interested to hear your thoughts- I have one of the first ones to be released and am very impressed: a major step up from the previous RTR model..... 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now