modelpara Posted September 30, 2014 Share Posted September 30, 2014 Hi Guys I have two Dynamis Base Stations and two hand held units but I did not get the Power supply units with them or the connecter from the base station to the track so I am looking for a source for these if anyone can give me any suggestions as to where to look please. I am also looking for power supply units and track connectors for the Bachmann select of which I have 3 of those as well! All help appreciated. Link to post Share on other sites More sharing options...
DaveArkley Posted September 30, 2014 Share Posted September 30, 2014 Just a thought - Bachmann spares? http://www.Bachmann.co.uk/dcc_contact.php?faq=1 Cheers Dave Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted September 30, 2014 RMweb Gold Share Posted September 30, 2014 Rapid Electronics do the green screw terminal type connectors - I've used some with my SPROG. They do have a pretty hefty p&p cost though ... Link to post Share on other sites More sharing options...
modelpara Posted September 30, 2014 Author Share Posted September 30, 2014 Cheers, had forgotten about Bachmann own spares supply ooops! Link to post Share on other sites More sharing options...
Ron Ron Ron Posted September 30, 2014 Share Posted September 30, 2014 If I may ask, why multiples of these DCC systems? Are you planning to sell them on? . Link to post Share on other sites More sharing options...
modelpara Posted September 30, 2014 Author Share Posted September 30, 2014 If I may ask, why multiples of these DCC systems? Are you planning to sell them on? . Acquired from a collection I won on Ebay that didnt mention in the listing that they had them so was a bonus, I am thinking of selling on the EZ commands but not sure yet about the Dynamis Link to post Share on other sites More sharing options...
modelpara Posted October 1, 2014 Author Share Posted October 1, 2014 Acquired from a collection I won on Ebay that didnt mention in the listing that they had them so was a bonus, I am thinking of selling on the EZ commands but not sure yet about the Dynamis I have just realised that what I thought were two separate Dynamis sets is actually a command station and a pro add on ooops Link to post Share on other sites More sharing options...
Ron Ron Ron Posted October 1, 2014 Share Posted October 1, 2014 I have just realised that what I thought were two separate Dynamis sets is actually a command station and a pro add on ooops That's very good news then. The Dynamis base unit, containing the Command Station and Power Station (Booster), combined with the Pro Box would be quite useful, whether you wish to sell it, or keep it for your own use. With 2 handsets, the Pro Box allows loco rosters to be shared, copied and updated by sync'ing them. The Pro Box also allows more IR transmitter/receiver units to be added, which if placed carefully will eliminate IR blind spots. Going back to the power supplies. There have been several reports suggesting that replacing the supplied Bachmann power supply, with a suitable quality alternative, will also eradicate some of the technical issues that many people have experienced with the Dynamis DCC system. The original power supply being blamed, or said to be a contributing factor in those issues. I can't verify if this is indeed the case though. . Link to post Share on other sites More sharing options...
modelpara Posted October 1, 2014 Author Share Posted October 1, 2014 That's very good news then. The Dynamis base unit, containing the Command Station and Power Station (Booster), combined with the Pro Box would be quite useful, whether you wish to sell it, or keep it for your own use. With 2 handsets, the Pro Box allows loco rosters to be shared, copied and updated by sync'ing them. The Pro Box also allows more IR transmitter/receiver units to be added, which if placed carefully will eliminate IR blind spots. Going back to the power supplies. There have been several reports suggesting that replacing the supplied Bachmann power supply, with a suitable quality alternative, will also eradicate some of the technical issues that many people have experienced with the Dynamis DCC system. The original power supply being blamed, or said to be a contributing factor in those issues. I can't verify if this is indeed the case though. . Bachmann have been in touch the single PSU is £21 plus £2 in postage so well worth it I suspect Link to post Share on other sites More sharing options...
modelpara Posted October 6, 2014 Author Share Posted October 6, 2014 So the PSU and the cable arrived but apart from one jerk by the Hornby 08 nothing is moving or making noise GRRRRR Link to post Share on other sites More sharing options...
michaelp Posted October 6, 2014 Share Posted October 6, 2014 Rapid Electronics do the green screw terminal type connectors - I've used some with my SPROG. They do have a pretty hefty p&p cost though ... I got some from DCC Supplies Link to post Share on other sites More sharing options...
modelpara Posted October 6, 2014 Author Share Posted October 6, 2014 So the PSU and the cable arrived but apart from one jerk by the Hornby 08 nothing is moving or making noise GRRRRR And success I have managed to find the fault (solder connections had broken for some reason and dirty track) and its now fixed, I have finally heard my APT sound for myself Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.