MikeHohn Posted April 17, 2017 Share Posted April 17, 2017 Very nice video. Particularly the two trains crossing at 2 min. Excellent timing! Mike Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted April 18, 2017 Author RMweb Gold Share Posted April 18, 2017 Thanks Mike I do like it when trains cross at that point, it looks good through the S curve with them both headed in different directions. Cheers Tony Link to post Share on other sites More sharing options...
RMweb Gold Popular Post trw1089 Posted April 26, 2017 Author RMweb Gold Popular Post Share Posted April 26, 2017 Hi all Over Easter I did manage to get some time to finally tidy up my new A1, 60122 Curlew in BR Blue, something I have been covetting for a little while. I also took the opportunity to weather my D11 that I got a while ago and the K1 I received for Christmas. A few non-corridor coaches also got the treatment. With the arrival of two new Thompson coaches, and with careful study of a recently acquired Leeds District WTT (well a scanned copy), I also got to work on representing some of the passenger services, which resulted in another video at the bottom of the post. I'd be very interested to hear what you think of the results of these efforts! First, the A1. By 1952 the BR blue would've been getting a bit mucky, and as Curlew was shopped for a General in early 1953, coming out in BR green then, I tried to get a well worn but cleaned look to the loco. and I was happy how Bachmann BR blue darkened up after weathering and gloss coating. It had me a bit worried at first. Next through the weathering was the D11. Again, worn but wiped over is what I was aiming for. You can see some of the weathered Gresley suburbans too. Here is the other side of the D11: Finally the K1 - this one muckier, with a bit of a blow through the piston gland leading to some emulsified oil I also experimented with some night time shots before doing the video. This was the one I was most pleased with: OK, I know a D11 was unlikely to go through Westgate, but I do have a pic of one coming up the S&K lines to Pontefract, so perhaps not too much of a stretch to have one through Wakey, especially as there was a 4.20am off Sheffield Vic that ran through Westgate in the morning. Meanwhile, a big engine visited the shed at Arnthorpe. The Q6 was not amused at being outshone, but Dave's J50 kept a watchful eye over things. Finally, here is the video. Not a perfect adherance to the WTT, but perhaps inspired by it. 25 Link to post Share on other sites More sharing options...
richard.h Posted April 26, 2017 Share Posted April 26, 2017 Stunning work. this layout just gets better, I have just been reading through again to discover how you get that oily sheen finish on your locos. Your attention to detail is great and recreating the English countryside when you live so far away can't be easy. Looking forward to more. Link to post Share on other sites More sharing options...
Earl Bathurst Posted April 26, 2017 Share Posted April 26, 2017 Just found this topic. Looks superb. Your finish on the locomotives and rolling stock is just right. Now to start from page 1 and see more of your fantastic models. Scott Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted April 27, 2017 Author RMweb Gold Share Posted April 27, 2017 Thanks to everyone for the likes etc and to Scott and Richard for your posts, it makes it all worthwhile! Link to post Share on other sites More sharing options...
RMweb Premium great northern Posted April 28, 2017 RMweb Premium Share Posted April 28, 2017 Thanks Tony, I really enjoyed that Video. Isn't it nice to be able to recreate what really happened? Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted April 29, 2017 Author RMweb Gold Share Posted April 29, 2017 Thanks Tony, I really enjoyed that Video. Isn't it nice to be able to recreate what really happened? Yes Gilbert, but it's a double edged sword, as now I know that I need many more ordinary passenger services than I have stock for, plus I would love to replace all those ugly Hornby Gresleys with something a little more aesthetically pleasing. Still, it's very enjoyable to now have some of the right motive power for the right sort of trains. The mock up of the station showed that the views would be very evocative of the full sized station. Hopefully I will approach the sort of accuracy you have managed, but still have a long way to go. Cheers Tony 3 Link to post Share on other sites More sharing options...
The Blue Streak Posted April 29, 2017 Share Posted April 29, 2017 I would love to replace all those ugly Hornby Gresleys with something a little more aesthetically pleasing. You can always send them here to WA Tony, I really don't mind them at all as they rush past at a scale 60mph. Great video Mate and I Love what you have done with Curlew but I have a bit of a soft spot for BR Blue ER Pacifics anyway. Quick question please, Prior to weathering, how does the Bachmann blue compare with Hornby's ? Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted April 29, 2017 RMweb Premium Share Posted April 29, 2017 Hi all Over Easter I did manage to get some time to finally tidy up my new A1, 60122 Curlew in BR Blue, something I have been covetting for a little while. I also took the opportunity to weather my D11 that I got a while ago and the K1 I received for Christmas. A few non-corridor coaches also got the treatment. With the arrival of two new Thompson coaches, and with careful study of a recently acquired Leeds District WTT (well a scanned copy), I also got to work on representing some of the passenger services, which resulted in another video at the bottom of the post. I'd be very interested to hear what you think of the results of these efforts! First, the A1. By 1952 the BR blue would've been getting a bit mucky, and as Curlew was shopped for a General in early 1953, coming out in BR green then, I tried to get a well worn but cleaned look to the loco. and I was happy how Bachmann BR blue darkened up after weathering and gloss coating. It had me a bit worried at first. Next through the weathering was the D11. Again, worn but wiped over is what I was aiming for. You can see some of the weathered Gresley suburbans too. Here is the other side of the D11: Finally the K1 - this one muckier, with a bit of a blow through the piston gland leading to some emulsified oil I also experimented with some night time shots before doing the video. This was the one I was most pleased with: OK, I know a D11 was unlikely to go through Westgate, but I do have a pic of one coming up the S&K lines to Pontefract, so perhaps not too much of a stretch to have one through Wakey, especially as there was a 4.20am off Sheffield Vic that ran through Westgate in the morning. Meanwhile, a big engine visited the shed at Arnthorpe. The Q6 was not amused at being outshone, but Dave's J50 kept a watchful eye over things. Finally, here is the video. Not a perfect adherance to the WTT, but perhaps inspired by it. Super video Tony - it's always nice to see a proper operating layout and the pre-dawn segments looked very effective. 3 Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted April 29, 2017 Author RMweb Gold Share Posted April 29, 2017 You can always send them here to WA Tony, I really don't mind them at all as they rush past at a scale 60mph. Great video Mate and I Love what you have done with Curlew but I have a bit of a soft spot for BR Blue ER Pacifics anyway. Quick question please, Prior to weathering, how does the Bachmann blue compare with Hornby's ? Thanks Ted The Bachmann BR blue seemed a bit lighter than the Hornby version, but on weathering it now looks pretty much identical. Even just putting the initial coat of Floor polish on darkened it, so the matt finish that it has out of the box could be the reason why it has a slightly different tone. Cheers Tony Link to post Share on other sites More sharing options...
RMweb Premium great northern Posted May 3, 2017 RMweb Premium Share Posted May 3, 2017 Yes Gilbert, but it's a double edged sword, as now I know that I need many more ordinary passenger services than I have stock for, plus I would love to replace all those ugly Hornby Gresleys with something a little more aesthetically pleasing. Still, it's very enjoyable to now have some of the right motive power for the right sort of trains. The mock up of the station showed that the views would be very evocative of the full sized station. Hopefully I will approach the sort of accuracy you have managed, but still have a long way to go. Cheers Tony I don't want to put you off Tony, but it has taken me twenty years to get to where I am now. However, now I have the cunning plans with cassettes and spurs I have found that far less stock can be made to do far more work. Take for example the all important five set. Four slightly different BSKs, two or three different diagrams of SK, and the same of CKs will allow several different formations to be assembled. The same principle can be applied to all sorts of other things. 1 Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted August 15, 2017 Author RMweb Gold Share Posted August 15, 2017 Hi all Well it's been a while between posts, mostly due to work, but also been fighting colds and flu for the last few weeks which has killed a lot of mojo. Still, I managed to do up another video, extending the services from the 1948 Leeds Distrct WTT. It's not an exact match, and there are a couple of continuity errors from the previous video, but I was happy that I could replicate the movements of trains relatively faithfully. I still have a long way to go, the stock makeup on some services is best guesses based on a few photos and the various carriage working books I have downloaded from the BR coaching stock Yahoo group (thanks Robert Carroll!), and the engine workings are only just starting to come together. I do enjoy this facet of the hobby though, so hope you enjoy the end result. Cheers Tony 19 Link to post Share on other sites More sharing options...
RMweb Gold john dew Posted August 16, 2017 RMweb Gold Share Posted August 16, 2017 (edited) Hi Tony What a splendid video. It demonstrated your weathering skills a treat.........this thread continues to be my text book as I try to get a similar standard on Granby. Hadnt seen the coaches before.....they looked very authentic........another job! I particularly enjoyed the operational sequence and the links to the original timetable......fascinating. I liked the routine getting the brake van set up.....I have been puzzling how to do that......mind you I would use a pannier. How did you do the uncoupling? Was it with an electro magnet......there seemed no sign of the Kadee shuffle? I imagine you will not be divulging the secret of changing the end boards until you have patented it! Hope you have fully recovered from the flu. Best wishes John Edited August 16, 2017 by john dew Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted August 17, 2017 Author RMweb Gold Share Posted August 17, 2017 Thanks John All my uncoupling is using a sharpened chopstick actually! In the video I always cut that bit out... As for the tailights and gangway covers, Blue Tack is my best friend! Now I did actually see that the LNER got a couple of Panniers during the war to tide them over when they missed out on some Austerity 0-6-0s that went to the NCB instead. Fortunately none got North of Doncaster (well except for those Scottish runaways), and they were all gone in my time period (phew, that was a close one...). CheersTony Link to post Share on other sites More sharing options...
MikeHohn Posted September 9, 2017 Share Posted September 9, 2017 Another attractive and instructive video. I agree with John that your layout is like a textbook of ideas and methods. I liked seeing the big hand throwing some of the levers. Seeing your track is a reminder for me to get working on mine. Mike Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted September 9, 2017 Author RMweb Gold Share Posted September 9, 2017 Thanks Mike, that's very kind of you. Cheers Tony Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted October 17, 2017 Author RMweb Gold Share Posted October 17, 2017 (edited) As some may have noticed in the DCC Sound section I recently received a Locoman Sound decoder for my Hornby Black 5. In addition, thanks to another award at work I bought a South West Digital A3 Sound decoder to try out. The latter is on a Loksound V4 with the Black 5 on a Zimo. I’m actually impressed with both of them so decided to make a little video featuring them both, and my LRM J6 which puts in a cameo at the beginning to set the scene. Hope you enjoy it. Cheers Tony Edited October 17, 2017 by trw1089 8 Link to post Share on other sites More sharing options...
The Blue Streak Posted October 18, 2017 Share Posted October 18, 2017 (edited) Great Video thank you Tony. I must admit I did get quite a giggle at 6.15 hearing the whistle and then watching the signal come off (I get amused by small things ) Although I have had dipped a toe in the water with DCC, I have been a little unconvinced regarding some of the sound I have heard, however the ones in your video seem really quite good and I must admit it really does add a new dimension (see previous sentence regarding the giggles). I do like the look of your Black 5 and although I am firmly entrenched as a Eastern Enthusiast, I have been giving thought to perhaps putting together a token train from one of each of the other big 3. Minoru looks amazing, your weathering / gloss always looks just right. I look forward to your next video. Cheers Ted Edited October 18, 2017 by The Blue Streak Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted October 18, 2017 Author RMweb Gold Share Posted October 18, 2017 Thanks very much Ted I have a soft spot for Minoru as that finish looks like a proper cleaned engine. The Black 5 was really to pay homage to a friend of mine who encouraged me to model Wakefield Westgate. His favourite loco is 45305, so I did up a Wakefield shed example which ended up being 45201. Cheers Tony 1 Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted November 12, 2017 Author RMweb Gold Share Posted November 12, 2017 (edited) Hi all I’ve had a rather successful weekend modelling so thought I should post a couple of pics. I’m currently working on a pair of London Road Models J6’s, one for me and another to head back to the UK. With a bit of free time finally, both tenders were started and ready now for detailing. And While working on them, I finally got myself motivated enough to build a bending jig. I saw this on one of the Tony Wright Right Track videos and decided to make a double sided one to do broad and tight curves. Here it is on one of my vices: And the other side, showing it’s long enough to do some coach sides Sometimes it’s nice just to get stuck into some modelling! Cheers Tony Edited November 12, 2017 by trw1089 11 Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted November 13, 2017 Author RMweb Gold Share Posted November 13, 2017 The other thing that has been on my workbench over the last month or so has been a backdating, detailing and renumbering of an A3 to represent 60058 Blair Athol in its early 1953 guise when it was outshopped in BR Green and left hand drive. With Eric of Londrem and Pinkhill fame providing the inspiration and Gilbert’s ongoing advice, I’ve been able to get a reasonable representation of the A3 by casting a new single chimney, adding a Brassmasters detailing kit and HMRS decals and doing some tidy ups of errant pipe work and obvious seems. Here are a few shots ready for the paint and weathering shop. Cheers Tony 14 Link to post Share on other sites More sharing options...
RMweb Premium 60027Merlin Posted November 13, 2017 RMweb Premium Share Posted November 13, 2017 Lovely A3 Tony, It really looks the part. Eric Link to post Share on other sites More sharing options...
RMweb Gold trw1089 Posted November 13, 2017 Author RMweb Gold Share Posted November 13, 2017 Thanks Eric. Seeing all your lovely pacifics convinced me of the need to detail them up. I’ve always liked A3s, but giving them the treatment like this really brings out the best in Hornby’s model. Cheers Tony Link to post Share on other sites More sharing options...
danstercivicman Posted November 13, 2017 Share Posted November 13, 2017 What a lovely example of great loco modelling Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now