RMweb Gold PjKing1 Posted February 14, 2015 Author RMweb Gold Share Posted February 14, 2015 But then I have to replace the cab windows, grab rails, open the Serck louvres, replace the bogie springing with something that looks correct. That's a lot of work for £110 loco- plus how many years before it disintergrates? Only the Heljan ones will explode, hopefully 1 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 16, 2015 Author RMweb Gold Share Posted February 16, 2015 Nothing done on the layout front over the weekend but I did add the extra pickups to the 08. Also the other day I ordered some class 37 bogie pivot plates, I wasn't happy how I'd filed the originals down when lowerering the 37's as they looked a bit wonky. I've cut one pair down and fitted them to the green 37 and it looks much better, whilst doing that I re-fitted the sound chip and speaker under the fan as well as wiring up the speaker in the tanks. It runs and sounds pretty impressive I'm going to weather the bogies again to as I'm not happy with them then add the last bits of detail, then it's finally done. We're looking after her sisters house till Friday now so whilst I'm up there I'm going to make a start on the signal box, I've been looking forward to building this for a while!! Cheers, Paul 1 Link to post Share on other sites More sharing options...
class"66" Posted February 16, 2015 Share Posted February 16, 2015 Looking forward to 37 sound video now Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 16, 2015 Author RMweb Gold Share Posted February 16, 2015 Looking forward to 37 sound video now Bet you are Neil I tried to do one last night but I've used most the memory on my phone and it only recorded for a minute, didn't know whether it was worth uploading to YouTube or not? I'll try and get it uploaded tonight buddy. Thanks, Paul 1 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 16, 2015 Author RMweb Gold Share Posted February 16, 2015 (edited) Here you Neil just for you It's a pretty poor vid but the sound isn't bad. Cheers, Paul Edited February 16, 2015 by PjKing1 3 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 18, 2015 Author RMweb Gold Share Posted February 18, 2015 (edited) Evening all, I had hoped to make a start on the box one night this week, but I've had no time what so ever so it'll have to wait until I'm back home unfortunately So this is as far as I've got I'm affraid. Cheers, Paul Edited February 18, 2015 by PjKing1 Link to post Share on other sites More sharing options...
leopardml2341 Posted February 18, 2015 Share Posted February 18, 2015 Evening all, I had hoped to make a start on the box one night this week, but I've had no time what so ever so it'll have to wait until I'm back home unfortunately So this is as far as I've got I'm affraid. image.jpg Cheers, Paul Isn't that candle holder a bit overscale? Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 18, 2015 Author RMweb Gold Share Posted February 18, 2015 Isn't that candle holder a bit overscale? I did say I was no good at scratch building Thanks, Paul Link to post Share on other sites More sharing options...
Derekstuart Posted February 18, 2015 Share Posted February 18, 2015 Did you not find making a candle holder an 'illuminating' experience then? Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 18, 2015 Author RMweb Gold Share Posted February 18, 2015 Did you not find making a candle holder an 'illuminating' experience then? Oh they get worse and there's me thinking I tell terrible jokes!! Thanks for brightened my night up , Paul Link to post Share on other sites More sharing options...
Derekstuart Posted February 18, 2015 Share Posted February 18, 2015 I suppose you're going to start WAXing lyrical about the candle then? Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 18, 2015 Author RMweb Gold Share Posted February 18, 2015 I suppose you're going to start WAXing lyrical about the candle then? No waxing for me, I've a male groomer razor thing Link to post Share on other sites More sharing options...
Derekstuart Posted February 18, 2015 Share Posted February 18, 2015 Paul, a slightly more sensible question (well, comparatively speaking) From all your photos, would you give an opinion on what the minimum length that can be used properly for a photographic plank? I thought 2ft would do it, but it now I've just found no matter what angle I take from it comes out rubbish. Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted February 19, 2015 RMweb Gold Share Posted February 19, 2015 I suppose you're going to start WAXing lyrical about the candle then? At least he isn't modelling Wick! Phil Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 19, 2015 Author RMweb Gold Share Posted February 19, 2015 Paul, a slightly more sensible question (well, comparatively speaking) From all your photos, would you give an opinion on what the minimum length that can be used properly for a photographic plank? I thought 2ft would do it, but it now I've just found no matter what angle I take from it comes out rubbish. Morning Derek, I recon anything 2' or over, almost all my photos need to be cropped to eliminate, a dodgy Minnie Mouse or somet in the background. If you can place the plank so there's nothing else getting in the photo the easier it'll be. But having said that some of my photos are taken close up so less that a 1ft is used. Hope that helps, Paul Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 21, 2015 Author RMweb Gold Share Posted February 21, 2015 Well I've finally got around to making a start on the box, I painted the windows!! But then I got distracted by testing out the kids xbox one for three hours, ahem I had to make sure it was working properly for them Hopefully I good few hours modelling tomorrow with something to show for it. Cheers, Paul Link to post Share on other sites More sharing options...
Jintyman Posted February 21, 2015 Share Posted February 21, 2015 Well I've finally got around to making a start on the box, I painted the windows!! But then I got distracted by testing out the kids xbox one for three hours, ahem I had to make sure it was working properly for them Hopefully I good few hours modelling tomorrow with something to show for it. Cheers, Paul Nothing wrong with that, PS in this house though, plenty of Drake, Lara and AC! Always good for some escapism. Jinty ;-) Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted February 22, 2015 RMweb Gold Share Posted February 22, 2015 Nothing wrong with that, PS in this house though, plenty of Drake, Lara and AC! Always good for some escapism. Jinty ;-) Noooo that's what the railway is for!!!! Phil 2 Link to post Share on other sites More sharing options...
Jintyman Posted February 22, 2015 Share Posted February 22, 2015 Noooo that's what the railway is for!!!! Phil I should of added the word 'alternate'!!! But railway is certainly 1st Jinty ;-) Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 22, 2015 Author RMweb Gold Share Posted February 22, 2015 Good job I'm crap at computer games otherwise I would get distracted to much!! Haven't played on one for years, late night last night so once I'm with it I'll do some on the box, hopefully some pics later Paul 1 Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 22, 2015 Author RMweb Gold Share Posted February 22, 2015 Well I finally got to do some work on the box, I've attached thin clear plastic to the windows using ClearFix and attached the front windows in place, I've also glazed the side windows and door to. I've made a couple of the windows open to. The box won't be this tall it was just easier playing safe and I'll trim the bottom accordingly. Cheers, Paul 4 Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted February 22, 2015 RMweb Gold Share Posted February 22, 2015 Nice progress mate - will be impressive no doubt. Have spent day building PD hoppers and putting additional pick ups on D200 - have similar job to do on D6320, never run out of jobs do we? Phil 1 Link to post Share on other sites More sharing options...
Jintyman Posted February 22, 2015 Share Posted February 22, 2015 Nice scratch build Paul, It'll look good on the layout once done. Jinty ;-) Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 22, 2015 Author RMweb Gold Share Posted February 22, 2015 Nice progress mate - will be impressive no doubt.Have spent day building PD hoppers and putting additional pick ups on D200 - have similar job to do on D6320, never run out of jobs do we?Phil Thanks Phil, never enough time in the day!! How is D200 now? It was a bit temperamentle last time out. Looking forward to some pics of your hoppers Cheers, Paul Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted February 22, 2015 Author RMweb Gold Share Posted February 22, 2015 Nice scratch build Paul, It'll look good on the layout once done.Jinty ;-) Thanks Jinty, I'm going to do a full interior to! Cheers, Paul Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now