jimikelly Posted July 2, 2014 Share Posted July 2, 2014 Hi guys Im stating a new loft layout and I have 33 x 12 feet to play with ..and anyone advise me what would be the largest radius I could use... Link to post Share on other sites More sharing options...
RMweb Gold johndon Posted July 2, 2014 RMweb Gold Share Posted July 2, 2014 A 5 foot radius curve would fit and would still you give you a foot of space on the 'outside' of the loop along the length. John Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted July 2, 2014 Share Posted July 2, 2014 In that space you could put in an arc from a curve on which high speed running is genuinely possible, down a long side. A scale mile radius or more... In terms of 'mechanics' to return the line at the ends, in that sort of space use 36" radius in 4mm scale. Trouble free running, relatively little drag on curves even with a train round 180 degrees of it. Little point in going larger, 60" radius still scales as a really tight curve in reality, requiring a check rail for passenger operation and very slow speed. Better to conceal the return curves in my view and use as much of possible of the long sides to show really easy curvature. Link to post Share on other sites More sharing options...
cromptonnut Posted July 2, 2014 Share Posted July 2, 2014 Transition curves are great for this sort of situation. If you have a "wide radius" curve from the end of the straight section, say 15ft radius, then down to 10ft radius then 5ft radius as mentioned above (do the reverse on the curve coming out, or from both ends - same difference). It then makes the difference between curve and straight far less noticeable, and if you can hide the tightest curvature in a tunnel, for example, even better. Link to post Share on other sites More sharing options...
jimikelly Posted July 2, 2014 Author Share Posted July 2, 2014 Assuming this is 4mm scale? So sorry .yes its OO Link to post Share on other sites More sharing options...
jimikelly Posted July 2, 2014 Author Share Posted July 2, 2014 Guys thanks for your time ,this will be a great help Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted July 2, 2014 RMweb Gold Share Posted July 2, 2014 The beginners idea of four sharp corners with straight lengths between them rarely looks natural. The advice of using transistion curves is good. Look at an Ian Rice track plan barely any straight track. If you can fit it in a 4ft minimum on main lines would be fine yes 3ft will work but 4ft looks better. A bit of curved track going through a tunnel where you can see both ends looks odd to me I find a deep cutting looks so much better unless there is a senic break. Don Link to post Share on other sites More sharing options...
RMweb Premium Gwiwer Posted July 3, 2014 RMweb Premium Share Posted July 3, 2014 Transition curves are used on the real railway and when used for models can permit realistic-looking curves with deceptively tight minimum radii. A transition curve also helps the trains to ease into and out of the radius rather than suddenly lurching from straight to minimum radius then back again. Wear and tear is reduced and there is generally less drag which can slow down trains and even cause derailments. There is less chance of coupler problems as what ever system you use the pivot mechanism has a chance to transition steadily from one extreme (straight) to another (curved) and back again. There are other tricks which can be used to disguise sharper radii while still retaining that realistic feel. Even with a lot of space available taking a sharper curve through a tunnel around the corner can help give longer transitions either side and perhaps a straight run along the shorter edge. Take a look for example at my own layout thread (linked in my signature) which uses very tight radii around the top corners which are effectively concealed and which - with transitions and in my case also a little cant - mean I can run long trains with perfect reliability through curves which are near the minimum radius quoted for the stock in question. But only that tight for a few inches! Link to post Share on other sites More sharing options...
jimikelly Posted July 3, 2014 Author Share Posted July 3, 2014 Gwiwer, I have no idea how to get to your link through your signature ,I dont even know what that is can you tell me please .regards Jim Link to post Share on other sites More sharing options...
RMweb Premium Gwiwer Posted July 3, 2014 RMweb Premium Share Posted July 3, 2014 Certainly. At the bottom of my posts there should be a couple of lines of grey text and three hyperlinks in blue. Click on the blue link "Visit Penhayle Bay" to go to my current layout. If you don't see that link on your device perhaps try a search for the name "Penhayle Bay" as it will come up on any search engine and usually link to this site as the tope result. Link to post Share on other sites More sharing options...
cromptonnut Posted July 3, 2014 Share Posted July 3, 2014 Gwiwer, signatures don't appear on the "mobile" version of RMWeb - I don't know if jimikelly is viewing RMWeb on a mobile device though, if on desktop I believe there is an option to "turn off" signatures somewhere in the control panel. Link to post Share on other sites More sharing options...
RMweb Premium Gwiwer Posted July 3, 2014 RMweb Premium Share Posted July 3, 2014 Gwiwer, signatures don't appear on the "mobile" version of RMWeb - I don't know if jimikelly is viewing RMWeb on a mobile device though, if on desktop I believe there is an option to "turn off" signatures somewhere in the control panel. Ah. Not using a mobile to browse the web (I'm of an age where "phones" are used for making phone calls - sending texts at a push) I wasn't aware of that. Click on this link which directs to a post in the thread including a half-decent view of the tightest curves on the layout as described. http://www.rmweb.co.uk/community/index.php?/topic/6296-penhayle-bay/?p=1425071 Link to post Share on other sites More sharing options...
edcayton Posted July 3, 2014 Share Posted July 3, 2014 What about having the maximum radii at the ends, and then having the sides as large radius curves in the opposite direction, thus giving an "hour glass" shape to the layout? Ed Link to post Share on other sites More sharing options...
great central Posted July 3, 2014 Share Posted July 3, 2014 Following up a couple of the comments about tightening radius as you go round the corner, this, I think, gives the idea. The radius in the foreground is about 6ft, tightening to 3ft around the gantry beyond the lattice one. There's no tunnel or anything, the scenery just falls away as the fiddle yard is entered as here; The locos are almost at the end of the scenic section, on a 3ft radius curve. The embankment to the right of the camera drops to ground level beside the camera Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.