Andrew Young Posted September 29, 2016 Author Share Posted September 29, 2016 That van looks the bees knees Mr Young - very very nice. Nice photos too - the lamb looks rather tasty! Thanks Neil, will bring the carriages along to a meet once I've finished them. The lamb was very tasty! After eight hours in the Smokebox, it fell apart, the shoulder blade just sliding out. Bought from the butcher in Tywyn and reared locally, the food miles were less than one for the raising and thirty for cooking! Cheers, Andrew Link to post Share on other sites More sharing options...
RMweb Gold NeilHB Posted September 30, 2016 RMweb Gold Share Posted September 30, 2016 Sounds good - let me know when you do and I'll bring the Railcar along too. Lovely stuff! Link to post Share on other sites More sharing options...
Andrew Young Posted October 8, 2016 Author Share Posted October 8, 2016 (edited) My modelling mojo has well and truly returned now. Between shifts this last week or two, the carriages have been primed (Halfords Red Oxide rattle can), followed by a couple of coats of the same VW red rattle can that the Selsey carriage was painted and the open third has received some cream panelling too. Now that I've wandered across the road to Tutbury Models, I now have fresh supplies of Humbrol tan paint for painting the droplights. There's still plenty of painting to be done, but little and often is the order of the day. There has also been another narrow gauge diversion.... I'm not quite sure what exact form the Upper Melyn Tramway will take, other than bringing granite, slate and timber down to the standard gauge and delivering coal and sundry supplies in return, but ideas are forming in my mind. Whilst there will be a heavy Kerr Stuart bias in the loco roster, I fancied an elderly Fletcher Jennings as the initial motive power for the line, still wheezing away in old age in the 1920s. Wanting something different to the Talyllyn or Dolgoch seen on a number of layouts. Many months ago, I embarked on a project which yesterday turned into something real for the first time with the arrival of a parcel. The project is a 3D printed model of 'Townsend Hook', comprising a main body, with separate smokebox door, firebox and cab roof. A straight, square and pretty accurate canvas to which I can add as much detail as I want. All designed to fit on a modified Branchlines 'Talyllyn' chassis. There are a couple of compromises to make a 3ft 2 3/4in gauge loco fit on a chassis that's 16.5mm gauge, though remarkably few. The chassis is the correct wheelbase and wheel diameter, the main compromise here being that 'Talyllyn' is a double slide bar loco, whereas 'Townsend Hook' is a single slidebar loco. But that's a compromise I'm willing to take. To achieve a reasonable price for the print, I'm having four made, with three friends paying for the other three to help me out. The photos show the parts straight from the box placed on the Talyllyn chassis not having had any work on the surface finish, which I reckon is pretty good for a 3D printed model. This one shows the component parts. I'll start a separate thread in the narrow gauge section for the build, but I'm expecting to carry out painting the carriages alongside the completion of the FJ build. My intention was to use 3D printing as an aid to my own scratch building and producing some of the parts that would be more difficult for me to scratch build. Once I've built mine, my intention is that should others want a 3D print to aid them in their scratch building then I would make it available. Cheers, Andrew Edited October 8, 2016 by Andrew Young 6 Link to post Share on other sites More sharing options...
RMweb Gold NeilHB Posted October 9, 2016 RMweb Gold Share Posted October 9, 2016 (edited) That colour does suit the coaches very nicely Andrew - will have to investigate some Humbrol tan for the drop lights on my coaches as that looks rather nice. Looking forward to further progress on Townsend Hook too. Edited October 9, 2016 by NeilHB Link to post Share on other sites More sharing options...
Andrew Young Posted October 9, 2016 Author Share Posted October 9, 2016 (edited) That colour does suit the coaches very nicely Andrew - will have to investigate some Humbrol tan for the drop lights on my coaches as that looks rather nice. Looking forward to further progress on Townsend Hook too. Thanks Neil, I wanted a brownish red and thankfully, my first car was just such a colour! Although the tin says best applied over grey primer, I've applied over red oxide primer to enhance the browner hues as sometimes dark reds can have a pinkish hue. The tan isn't overly prototypical I suspect, but it gives some welcome relief to the main body colour. Will keep you posted. Cheers, Andrew Edited October 9, 2016 by Andrew Young Link to post Share on other sites More sharing options...
Phil Traxson Posted October 13, 2016 Share Posted October 13, 2016 (edited) Thanks Neil, I wanted a brownish red and thankfully, my first car was just such a colour! Although the tin says best applied over grey primer, I've applied over red oxide primer to enhance the browner hues as sometimes dark reds can have a pinkish hue. The tan isn't overly prototypical I suspect, but it gives some welcome relief to the main body colour. Will keep you posted. Cheers, Andrew 100_0672 by Phil Traxson, on Flickr Andy Your tan is as close to these varnished droplights as you are going to get. Despite what the rivet counters say you can't see wood grain at 1/43rd full size. Phil T. PS For the benefit of others click on the photo and it will take you to my flickr album with these on and four F.R. Coaches and three different colours of droplights between them. Edited October 13, 2016 by Phil Traxson 3 Link to post Share on other sites More sharing options...
Andrew Young Posted October 13, 2016 Author Share Posted October 13, 2016 Thanks Phil. After posting that comment I'd been wondering where I'd got the idea to paint drop lights tan from, think it must've been you! Agreed about tan being a good match for varnished wood, it's the colour I paint the insides of carriages too. Cheers, Andrew Link to post Share on other sites More sharing options...
Andrew Young Posted November 9, 2016 Author Share Posted November 9, 2016 Painting the four carriages in one go seemed a great idea, until getting the brushes out and it has seemed like a never ending task..... Not helped by several distractions in October, including three consecutive weekends in Wales. However, pleased to say that all the main bodywork painting is complete. Next job is transfers..... Still a way to go yet, there are some fittings still to paint up / chemically blacken before a quick spray of dulcoat and on to the weathering. Then I suspect the carriages will be finished off one at a time with glazing and a scattering of passengers. Plus two of them need a roof and seats making. Thankfully, November's diary is looking a lot clearer.... Cheers, Andrew 8 Link to post Share on other sites More sharing options...
RMweb Gold NeilHB Posted November 10, 2016 RMweb Gold Share Posted November 10, 2016 Very nice Mr Young, very nice indeed! Neil Link to post Share on other sites More sharing options...
Andrew Young Posted November 10, 2016 Author Share Posted November 10, 2016 Very nice Mr Young, very nice indeed! Neil Thanks Neil. Transfers were applied yesterday evening and a waft of Dulcote was put over them this morning. Left them in the airing cupboard whilst I went to work so will see how they've come out in the morning. Cheers, Andrew Link to post Share on other sites More sharing options...
Andrew Young Posted November 11, 2016 Author Share Posted November 11, 2016 Some iPhone photos showing the carriages with transfers applied. The transfer backing shows up more on the photos than they do on the models. Shall have to see whether I can improve that with weathering. Shall take some photos with the proper camera once the carriages are finished. It is thought that the luggage van was a later addition to the fleet, it's not air brakes for a start and is understood to have been purchased to act as a parcels and goods van to run on the goods services. So there's a deliberate gap in numbers in case of future additions to the carriage fleet. Cheers, Andrew 5 Link to post Share on other sites More sharing options...
Andrew Young Posted November 11, 2016 Author Share Posted November 11, 2016 Distractions. I did mention that October was full of distractions, namely three successive weekends in Tywyn for some last driving of the season, a Council meeting and our annual fireworks party. Does mean I get to spend plenty of time in Mid Wales in Autumn, my favourite season. Hopefully, when the MVR eventually gets to the stage of being developed scenically, I'll have a stab at modelling the place in Autumn. Had a couple of days driving No 6. Red Meadow by Andrew Young, on Flickr Including a spot of Cowboy driving.... Cowboy Crew by Andrew Young, on Flickr My last turn of the season was a charter for some filming work, resulting in driving this fine array of vintage wreckage! A suitable end to a very enjoyable season. Meals on Wheels by Andrew Young, on Flickr The trip for the Council was a very long day trip, so varied the route a little and drove via the Tanat Valley. Stopped to look at the very rusty rails at Porthywain. Trains No More by Andrew Young, on Flickr Plus time to enjoy the autumnal colours at Talyllyn. Talyllyn Autumn by Andrew Young, on Flickr There's also been plenty of work to distract me, including twelve days of action packed diversions via Kidderminster and the land that time forgot. Stopped by Signals by Andrew Young, on Flickr November has a much quieter diary, the only distraction so far being fireworks at Klondyke Mill, only ten minutes drive down the road. Klondyke By Night by Andrew Young, on Flickr Now back to the modelling desk... Cheers, Andrew 5 Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted November 11, 2016 RMweb Gold Share Posted November 11, 2016 You've been having fun again. It that picture of the autumn colours taken near the lake? Nice pictures. Don Link to post Share on other sites More sharing options...
Andrew Young Posted November 11, 2016 Author Share Posted November 11, 2016 You've been having fun again. It that picture of the autumn colours taken near the lake? Nice pictures. Don Yes Don, lots of fun! But has hampered modelling time though... The photo is taken just above the lake, between the car park and the Cader Idris visitor centre / cafe adjacent to the road junction and Minffordd Hotel at the base of the path up Cader. Cheers, Andrew Link to post Share on other sites More sharing options...
RMweb Gold NeilHB Posted November 11, 2016 RMweb Gold Share Posted November 11, 2016 Coaches look very nice! What make are the transfers please? Need some for my coaches and they look rather good. Cheers, Neil Link to post Share on other sites More sharing options...
Andrew Young Posted November 11, 2016 Author Share Posted November 11, 2016 Coaches look very nice! What make are the transfers please? Need some for my coaches and they look rather good. Cheers, Neil Thanks Neil. They're Fox South Eastern & Chatham ones. Cheers, Andrew Link to post Share on other sites More sharing options...
RMweb Gold NeilHB Posted November 11, 2016 RMweb Gold Share Posted November 11, 2016 Thanks Neil. They're Fox South Eastern & Chatham ones. Cheers, Andrew Ta muchly Mr Young - I shall have a look Link to post Share on other sites More sharing options...
Andrew Young Posted December 22, 2016 Author Share Posted December 22, 2016 Over a month since an update, but slow progress has been made with the carriages. Have come to the conclusion that a) building four carriages at once wasn't the best idea- there's a heck of a lot of work involved! And b) I prefer building locos and wagons to coaches! Having said that, all the coaches have had all the fiddly detail bits added, plus couplings buffers etc and all have been chemically blackened before fitting. Have also sorted out a few figures to populate the carriages. Next stage is weathering, however this week, I've taken some time to catch up on my other project that's on the go in tandem, my Fletcher Jennings loco. My OCD certainly took over with the detail! More details can be found on its own thread: http://www.rmweb.co.uk/community/index.php?/topic/115647-7mm-scale-townsend-hook/?p=2545968 However, as photos of carriages with some detail added is hardly thrilling, here's a photo of the loco with a comparison shot of William Finlay. Cheers, Andrew 9 Link to post Share on other sites More sharing options...
RMweb Premium DLT Posted December 23, 2016 RMweb Premium Share Posted December 23, 2016 (edited) The trip for the Council was a very long day trip, so varied the route a little and drove via the Tanat Valley. Stopped to look at the very rusty rails at Porthywain. Trains No More by Andrew Young, on Flickr Lovely modelling and photos Mr.Young, What's happening with the Tanat valley line? I see a lot of clearance has been done, last time I passed that way the track just disappeared into a hedge! I'm not trying a thread hi-jack, is there any information anywhere/ Cheers, Dave. Edited December 23, 2016 by DLT 3 Link to post Share on other sites More sharing options...
Andrew Young Posted December 23, 2016 Author Share Posted December 23, 2016 Thanks Dave. Agreed there are signs of fairly recent tracked clearance, think there are a couple of groups working towards opening parts of the old TVLR, but can't find anything much on the web about them. Cheers, Andrew Link to post Share on other sites More sharing options...
Andrew Young Posted January 20, 2017 Author Share Posted January 20, 2017 The layout is set up in the spare room and an order of electrickery materials has arrived so a start will very shortly be made on wiring the layout up at last! Though, having been reading Iain Rice's new book on 'Cameo Layouts' has given me some food for thought. Treating the MVR as one grand plan, generally results in too much thinking and not enough doing. However, if it is built as a series of modules or cameos, each an end in itself, with scenic breaks between each one, I can concentrate on each element at a time, rather than seeing how it fits in with the next piece. The result of this is that I suspect that the MVR will initially become slightly smaller, but which hopefully will result in the MVR expanding quicker in the long term, whilst also being operable as a layout as I do so. More will be written as it happens. There has been some feverish activity on the modelling bench this last couple of weeks and my modelling mojo is well and truly back. Though the recent activity has seen my FJ loco project finished. Think it's probably taken near enough two years to get from the original idea to this stage, but has definitely been worth it and the 3D printed body should soon be available from CWRailway should anyone else want one. One pleasing personal achievement with this loco has been to overcome the chassis demons and make a chassis work well at last! Even down to using and quartering Gibson wheels. A couple of photos to wet the appetite, but the saga can be found here: http://www.rmweb.co.uk/community/index.php?/topic/115647-7mm-scale-townsend-hook/?p=2583938 The narrow gauge locos are outnumbering the finished standard gauge ones... Once the layout is up and running, expect to see the balance restored. It does make me think that phase two of the MVR will have to incorporate the Upper Melyn Tramway in some way! Cheers, Andrew 6 Link to post Share on other sites More sharing options...
RMweb Gold Edwardian Posted January 20, 2017 RMweb Gold Share Posted January 20, 2017 The layout is set up in the spare room and an order of electrickery materials has arrived so a start will very shortly be made on wiring the layout up at last! Though, having been reading Iain Rice's new book on 'Cameo Layouts' has given me some food for thought. Treating the MVR as one grand plan, generally results in too much thinking and not enough doing. However, if it is built as a series of modules or cameos, each an end in itself, with scenic breaks between each one, I can concentrate on each element at a time, rather than seeing how it fits in with the next piece. The result of this is that I suspect that the MVR will initially become slightly smaller, but which hopefully will result in the MVR expanding quicker in the long term, whilst also being operable as a layout as I do so. More will be written as it happens. There has been some feverish activity on the modelling bench this last couple of weeks and my modelling mojo is well and truly back. Though the recent activity has seen my FJ loco project finished. Think it's probably taken near enough two years to get from the original idea to this stage, but has definitely been worth it and the 3D printed body should soon be available from CWRailway should anyone else want one. One pleasing personal achievement with this loco has been to overcome the chassis demons and make a chassis work well at last! Even down to using and quartering Gibson wheels. A couple of photos to wet the appetite, but the saga can be found here: http://www.rmweb.co.uk/community/index.php?/topic/115647-7mm-scale-townsend-hook/?p=2583938 Sir Jasper 2.JPG Sir Jasper 3.JPG The narrow gauge locos are outnumbering the finished standard gauge ones... Once the layout is up and running, expect to see the balance restored. It does make me think that phase two of the MVR will have to incorporate the Upper Melyn Tramway in some way! Sir Jasper Lineup.JPG Cheers, Andrew Stunning work. Characterful subjects. Link to post Share on other sites More sharing options...
RMweb Premium DLT Posted January 20, 2017 RMweb Premium Share Posted January 20, 2017 Sir Jasper is looking very nice indeed. Cheers, Dave. Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted January 20, 2017 RMweb Gold Share Posted January 20, 2017 Sir Jasper is looking good. The 'cameo' idea sounds workable probably most suited to a light railway with short trains it will allow you to concentrate on the interesting bits. Don Link to post Share on other sites More sharing options...
Andrew Young Posted March 30, 2017 Author Share Posted March 30, 2017 Been a couple of months since the last update. Life has been quite hectic with several birthdays in our family around this time. However, there have been sporadic visits to the modelling bench. First up, have been painting figures for my carriages, its fair to say that the services will be sparsely populated! Have also constructed some resemblance of seating for the Third and Brake Third carriages, which will be tramway style along the sides and constructed out of styrene section. Very quick, easy and sturdy. Decided to finish the carriages one at a time, starting with the Rother Valley style third, seen here mid weathering and amongst the passengers. Front of view is a styrene roofing section purchased from the 7mmNGA for a pound or two in Mickleover in January, which, when cut to size, should form a decent roof for this carriage. Also made some progress at last on the layout yesterday by fitting the blue point operators and setting them up. Shall have to get the soldering iron out next to wire the thing up.... Exhibitions can do wonders for the Modelling Mojo and succeeded in attending two in March. First up was Narrow Gauge North in Leeds, where Bob Harper did his usual trick of handing the controller over to someone who stops for a chat whilst looking at his Franklin On2 layout. A happy hour ensued which reminded me how much fun even a small layout can bring... Usually, my trips to Leeds involve driving tin rockets, departing Leeds northbound I often look enviously towards The Brewery Tap, outpost of Leeds Brewery as I depart towards Newcastle. This time though, there was time to see what the view is like looking the other way before catching my train home. The following weekend saw the Nottingham Exhibition, one of my favourites as my Dad is still involved with the club I was involved with as a teenager. This year's show was up to the usual high standard which saw me impressed by some N gauge and some American HO layouts, which is most unusual for me... However, my favourite being Macclesfield club's 'Wolfe Lowe' layout, inspired by Rice's 'Leintwardine' plan and very nicely done. And finally.... Been to Tywyn a couple of times, first off at the end of January, spent a weekend learning all about hedge laying, add a new skill to the collection. The view wasn't bad either. By comparison, had my shortest trip to Tywyn yet last week. By train for the day, was in Tywyn for two hours to collect something which will come in useful in a couple of weeks time (no doubt there'll be a post about it...) After visiting the flat, there was just time to look in at Pendre, see the sights on the front and have a quick liquid refreshment before heading back home. Cheers, Andrew 11 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now