105mark Posted July 2, 2015 Share Posted July 2, 2015 Please tell me those ran on metals close to the GWR? I may be able to justify it... Hi, My Drummond 700 in late BR livery arrived today. There are 2 flaws: 1) 2 casting lines are visible behind the chimney running from side to side and a single line runs back to front on each side just below the smokebox door. You have to look closely to see them. The lines are pretty straight and could be mistaken for being present on the original model. 2) more annoyingly the number on the smokebox door is just very likely lopsided. Performance out of the box if smooth going backwards, but there is some jerkiness on moving forward. The model looks very good overall. I may decide to keep mine even with the defects. Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted July 3, 2015 RMweb Gold Share Posted July 3, 2015 (edited) Now with real coal added. I still need to renumbered and then heavily weather it. Edited July 3, 2015 by roundhouse 8 Link to post Share on other sites More sharing options...
Retro_man Posted July 3, 2015 Share Posted July 3, 2015 Please tell me those ran on metals close to the GWR? I may be able to justify it... I am 100% sure they did :-) Link to post Share on other sites More sharing options...
Butler Henderson Posted July 3, 2015 Share Posted July 3, 2015 (edited) Hi, Performance out of the box if smooth going backwards, but there is some jerkiness on moving forward. The coupling rods hit the steps on one side on mine, but only when running forward! Edited July 4, 2015 by Butler Henderson Link to post Share on other sites More sharing options...
Clive Mark Posted July 3, 2015 Share Posted July 3, 2015 Paul Bolger's allocation book shows 30306, 30316, 30350 and 30700 shedded at Eastleigh in 1950 and 303600 and 30316 shedded Eastleigh in 1959. Seems a safe bet they went north as well as south. I'm really keen to know if they went north via Winchester Chesil up the Didcot Newbury Southampton. Link to post Share on other sites More sharing options...
Garethp8873 Posted July 3, 2015 Share Posted July 3, 2015 Decided to unbox both the Southern liveried LSWR 700s yesterday as I ain't properly looked at them since purchase this time last week... an excellent purchase!! Two different liveries, E695 in SR Black with Green lining and 325 in SR Black livery. A splendid duo...!! 12 Link to post Share on other sites More sharing options...
Clive Mark Posted July 3, 2015 Share Posted July 3, 2015 Paul Bolger's book page 16 shows 30346 at Reading South shed 1959, late crest on tender and shed code 70B Feltham. Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted July 3, 2015 RMweb Gold Share Posted July 3, 2015 Looking nice, Ian. Whose the chap in the beret, blazer and medals on the footplate? Rob 4 Link to post Share on other sites More sharing options...
Coach bogie Posted July 3, 2015 Share Posted July 3, 2015 Picked my Southern Livery example up from Peter's Spares today. Runs fine straight from the box in both directions. Haulage power was not quite what I expected but there is plenty of room in the smokebox and over the worm for some lead which really improves traction. It will get the usual crew, coal, headcode disks etc for use on a Portsmouth - Bristol cattle imported cattle train with loco change at Westbury. Really pleased. Must build that DJH 0395 to go with it one day Mike Wiltshire Link to post Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted July 3, 2015 RMweb Gold Share Posted July 3, 2015 Picked my Southern Livery example up from Peter's Spares today. Runs fine straight from the box in both directions. Haulage power was not quite what I expected but there is plenty of room in the smokebox and over the worm for some lead which really improves traction. It will get the usual crew, coal, headcode disks etc for use on a Portsmouth - Bristol cattle imported cattle train with loco change at Westbury. Really pleased. Must build that DJH 0395 to go with it one day Mike Wiltshire Didn't know they ran to Westbury.Interesting.... Link to post Share on other sites More sharing options...
Coach bogie Posted July 3, 2015 Share Posted July 3, 2015 Didn't know they ran to Westbury.Interesting.... It does on my train set....... as does the Cheltenham Flyer (diverted due to derailment)????? Mike Wiltshire 3 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted July 4, 2015 RMweb Gold Share Posted July 4, 2015 Looking nice, Ian. Whose the chap in the beret, blazer and medals on the footplate? Rob He's out of the Bachmann loco crew set. Really needs his coat reprinting. Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted July 5, 2015 RMweb Gold Share Posted July 5, 2015 (edited) My own jottings of a review of the Black Motor can be read here http://grahammuz.com/2015/07/05/hornbys-black-motor-ex-lswr-sr-700-class-a-review/ Edited July 5, 2015 by Graham_Muz 10 Link to post Share on other sites More sharing options...
autocoach Posted July 5, 2015 Share Posted July 5, 2015 (edited) My own jottings of a review of the Black Motor can be read here http://grahammuz.com/2015/07/05/hornbys-black-motor-ex-lswr-sr-700-class-a-review/ Graham Ah salt in the wound.......Your pictures of 695 here and on your blog site along with other pictures on this thread of the SR version. Hattons made a rare mistake and sent me an R3239 instead of an R3238. It will take several weeks to straighten this out from California. I am awaiting instructions for the return of the R3239. It's a pity but the R3239 must remain unopened. Actually if the R3302 were separately available (I have too many low window Maunsell coaches already and the set is pricey), I would have preferred that. Shame to have to paint over the lining but my SR period is similar to yours, January 1945-December 31, 1947. Oh well. This was scheduled to be a very occasional visitor to Padstow. The Class C stand in will then be retired to the collection shelves. Edited July 5, 2015 by autocoach Link to post Share on other sites More sharing options...
RMweb Premium barrymx5 Posted July 5, 2015 RMweb Premium Share Posted July 5, 2015 I spent some time today comparing my 2 Hornby Southern Drummond 700s with my kit built version (Bec?) and also my kit built 0395 Class (DJH). I was aware the Bec model was perched on the chassis but only with it buffer to buffer with 695 did I realise how much! I must say I am delighted with the Hornby models, which run very well DC and I have drop in TCS de coders on order. Crew and irons will make a difference but cannot claim to be too exercised about handrail knobs. Each to their own. If I have the technology mastered there may even be a thumbnail below this post. In which case I may add others later. http://www.rmweb.co.uk/community/uploads/gallery/album_3677/med_gallery_4181_3677_59308.jpg 3 Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted July 5, 2015 RMweb Gold Share Posted July 5, 2015 Hi Barry The BEC kit was for some reason stretched in the vertical plane as I mentioned here http://grahammuz.com/2014/06/30/talking-stock-29-black-motors-drummonds-700-class/even with my old kits where I tried to address the buffer beam and running plate height the high boiler and too tall cab was still visibly wrong. Link to post Share on other sites More sharing options...
RMweb Premium barrymx5 Posted July 5, 2015 RMweb Premium Share Posted July 5, 2015 As threatened! 4 Link to post Share on other sites More sharing options...
RMweb Premium barrymx5 Posted July 5, 2015 RMweb Premium Share Posted July 5, 2015 Hi Barry The BEC kit was for some reason stretched in the vertical plane as I mentioned here http://grahammuz.com/2014/06/30/talking-stock-29-black-motors-drummonds-700-class/even with my old kits where I tried to address the buffer beam and running plate height the high boiler and too tall cab was still visibly wrong. Thanks Graham. As a result of a conversation, with you I believe, I was hunting for a new chassis for the Bec to make it a little more acceptable. But frankly I will now just get rid of it. Link to post Share on other sites More sharing options...
10800 Posted July 6, 2015 Share Posted July 6, 2015 Are you meant to be able to alter the tender coupling to the shorter distance? On first sight you can only detach it by unscrewing it from the loco, or can you detach the plastic pin on the tender to use the closer part of the 8-shaped hole? (probably makes more sense if you are looking at one). Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted July 6, 2015 RMweb Gold Share Posted July 6, 2015 Rod The pin on the tender is removable, it is an interference fit; as I mentioned in my review linked to in my post above that also includes a photo showing the comparison between the two settings Link to post Share on other sites More sharing options...
SRman Posted July 7, 2015 Share Posted July 7, 2015 (edited) My BR late livery one arrived from Rails a short time ago. It is presently on the rolling road on DC. Even on the lowest setting of my old controller, it is racing away, albeit very smoothly. Initially it exhibited a slight side to side swaying but that seems to have mostly cured itself after an hour of running.I managed to knock off one of the tender tool boxes before I had even got it onto the rolling road, while adjusting the tender drawbar to the closer setting, but all fixed now!! Next, I will have to do battle with the decoder fitting! Edit: adding to the above:I ran it for an hour in each direction on DC power on my rolling road, then fitted a TCS DP2X-UK direct plug-in decoder. It ran very sweetly indeed with the TCS decoder, with only the inertia/momentum settings tweaked, as is my norm. I used CV3 = 25 and CV4 = 17.It ran in service for the first time hauling a parcels rake of mixed four-wheel and bogie vehicles. There were no clearance problems with my third and fourth rail installations.All in all a very pleasing purchase. I spotted the crooked tool box in the tender in the photos. I have now straightened it up again. Sometimes these photos can be useful for showing such things where they would not otherwise have been noticed for goodness knows how long! Edited July 7, 2015 by SRman 1 Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted July 7, 2015 RMweb Gold Share Posted July 7, 2015 Are you meant to be able to alter the tender coupling to the shorter distance? On first sight you can only detach it by unscrewing it from the loco, or can you detach the plastic pin on the tender to use the closer part of the 8-shaped hole? (probably makes more sense if you are looking at one). The pin is metal not plastic and a very tight fit so you'll need a pair of pliers to remove it. Link to post Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted July 7, 2015 RMweb Gold Share Posted July 7, 2015 Southern Railway 695 is a sheer delight. A "looker" with smooth,effortless haulage capacity.Another impressive model.I await the D16 with relish. 1 Link to post Share on other sites More sharing options...
Peter Bedding Posted July 7, 2015 Share Posted July 7, 2015 Southern Railway 695 is a sheer delight. A "looker" with smooth,effortless haulage capacity.Another impressive model.I await the D16 with relish. The earliest I can get mine to a working test track will be next Tuesday (14th). Damn, it's frustrating. PB Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted July 7, 2015 RMweb Gold Share Posted July 7, 2015 (edited) Southern Railway 695 is a sheer delight. A "looker" with smooth,effortless haulage capacity.Another impressive model.I await the D16 with relish. Pity it's not going to be a D15. Sorry, mustn't be greedy............ John Edited July 7, 2015 by Dunsignalling Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now