Penlan Posted October 26, 2017 Share Posted October 26, 2017 I've recently purchased a K's Terrier kit on eBay but the kit didn't come with any instructions on building the chassis. Does anyone have a copy of them for this kit? I have the body and a much maligned/improved chassis set up for EM gauge, but no instructions. I seem to recall, though this is < 55 years ago, all there was, was a couple or three tubes that separated the sides, the tubes being threaded to accept screws that held it all together. I have a much more recent chassis on the loco now (Gibson sides?) but I'm going back to the old chassis.... Link to post Share on other sites More sharing options...
Lecorbusier Posted October 26, 2017 Share Posted October 26, 2017 I've recently purchased a K's Terrier kit on eBay but the kit didn't come with any instructions on building the chassis. Does anyone have a copy of them for this kit? As I understand things, South Eastern Finecast have now taken over the Nucast range which I believe includes the K's kits. It might be worth your while dropping them a line. I was looking for a Dean Goods (outside frames) set of instruction and Dave Ellis was able to provide them. Link to post Share on other sites More sharing options...
hayfield Posted October 26, 2017 Author Share Posted October 26, 2017 I've recently purchased a K's Terrier kit on eBay but the kit didn't come with any instructions on building the chassis. Does anyone have a copy of them for this kit? To be quite honest the instructions as such were just an exploded diagram, and any 6 wheel instruction would surface. Depending on which version (wheels and motor altered) screw the frames together, bolt the motor to the chassis, make the pickups, fit them and solder to the motor. I will have a look in the loft (all models packed away as having a new railway room built) to see what I have Normally if the wheels and motor are the newer plastic versions might be worth swapping them for better quality ones Link to post Share on other sites More sharing options...
LaScala Posted October 26, 2017 Share Posted October 26, 2017 As I understand things, South Eastern Finecast have now taken over the Nucast range which I believe includes the K's kits. It might be worth your while dropping them a line. I was looking for a Dean Goods (outside frames) set of instruction and Dave Ellis was able to provide them. Sorry to be pedantic, but there is no such thing as an outside frame Dean. There were Beyer & Armstrong 0-6-0's that went before; similar but not the same. Link to post Share on other sites More sharing options...
Lecorbusier Posted October 26, 2017 Share Posted October 26, 2017 (edited) Sorry to be pedantic, but there is no such thing as an outside frame Dean. There were Beyer & Armstrong 0-6-0's that went before; similar but not the same. Yep ... I know - but the K's kit always titled it thus on their boxes (though curiously not in the instructions)! Must have been something to do with wanting to save on printing dedicated labels? Though I was under the apprehension that the 2361 class was a Dean design? Edited October 26, 2017 by Lecorbusier Link to post Share on other sites More sharing options...
bike2steam Posted October 26, 2017 Share Posted October 26, 2017 I've recently purchased a K's Terrier kit on eBay but the kit didn't come with any instructions on building the chassis. Does anyone have a copy of them for this kit? If I remember rightly the K's chassis for the Terrier was so inaccurate, and crude, I slung it and replaced with a fabricated chassis using Gibson side frames. 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted October 26, 2017 Share Posted October 26, 2017 Yep ... I know - but the K's kit always titled it thus on their boxes (though curiously not in the instructions)! Must have been something to do with wanting to save on printing dedicated labels? Though I was under the apprehension that the 2361 class was a Dean design? s-l1000.jpg Yes. Dean designed them. https://en.wikipedia.org/wiki/GWR_2361_Class K's also made the 322 Beyer Goods https://en.wikipedia.org/wiki/GWR_322_Class and Nu Cast made the Armstrong Goods. https://en.wikipedia.org/wiki/GWR_388_class Jason 1 Link to post Share on other sites More sharing options...
hayfield Posted October 26, 2017 Author Share Posted October 26, 2017 Had a look in my loft but sadly came up with a blank, I have 4 Terriers but they may not have come in their original boxes. I do have a set of instructions for a K's coal tank, whilst an 0-6-2 with the exception of the rear bogie, the chassis construction is much the same. It is the earlier 70 series which has pre-quartered wheels and a double ended metal motor (mk 2 I think). The 80 series used plastic centred wheels with the axle holes being a D shape (to assist quartering) and all but the earliest kits came with the single ended plastic HMP2 motor.With the exception of fitting the wheels to the axles the construction is similar. In the absence of any other replies happy to scan and send Link to post Share on other sites More sharing options...
WhitehouseFilms Posted October 26, 2017 Share Posted October 26, 2017 Had a look in my loft but sadly came up with a blank, I have 4 Terriers but they may not have come in their original boxes. I do have a set of instructions for a K's coal tank, whilst an 0-6-2 with the exception of the rear bogie, the chassis construction is much the same. It is the earlier 70 series which has pre-quartered wheels and a double ended metal motor (mk 2 I think). The 80 series used plastic centred wheels with the axle holes being a D shape (to assist quartering) and all but the earliest kits came with the single ended plastic HMP2 motor.With the exception of fitting the wheels to the axles the construction is similar. In the absence of any other replies happy to scan and send Thats Ok. I think I've got the idea on how it goes together. I'm going to keep the original chassis and motor on the model as it keeps true to the model that I'm replicating. The terrier is going to be a model of the Bluebell Railway's engine No. 55 'Stepney' which is going to be a regular visitor on my Ffarquhar layout while I'm exhibiting at shows. Will see about writing a blog about it soon. Link to post Share on other sites More sharing options...
LaScala Posted October 26, 2017 Share Posted October 26, 2017 Yes. Dean designed them. https://en.wikipedia.org/wiki/GWR_2361_Class K's also made the 322 Beyer Goods https://en.wikipedia.org/wiki/GWR_322_Class This one popped up in Wright Writes last year by a Sandra Orpen. 10 Link to post Share on other sites More sharing options...
Steamport Southport Posted October 28, 2017 Share Posted October 28, 2017 I hope that's on the list for the reissues. Jason Link to post Share on other sites More sharing options...
outcastjack Posted October 29, 2017 Share Posted October 29, 2017 (edited) I did ask about the 2361 but it isn't in the next few earmarked for re-release. Given that I am currently in the process of making my first ever engine kit anyway probably not a bad thing from my perspective. Edit: The Bayer peacock looks lovely too! Edited October 29, 2017 by outcastjack Link to post Share on other sites More sharing options...
Brassey Posted October 29, 2017 Share Posted October 29, 2017 I did ask about the 2361 but it isn't in the next few earmarked for re-release. Given that I am currently in the process of making my first ever engine kit anyway probably not a bad thing from my perspective. Edit: The Bayer peacock looks lovely too! I'm told that Brassmasters are working on a 2361 for the Martin Finney range I too have a Beyer to build (one day!) Link to post Share on other sites More sharing options...
hayfield Posted November 4, 2017 Author Share Posted November 4, 2017 Had a look in my loft but sadly came up with a blank, I have 4 Terriers but they may not have come in their original boxes. I do have a set of instructions for a K's coal tank, whilst an 0-6-2 with the exception of the rear bogie, the chassis construction is much the same. It is the earlier 70 series which has pre-quartered wheels and a double ended metal motor (mk 2 I think). The 80 series used plastic centred wheels with the axle holes being a D shape (to assist quartering) and all but the earliest kits came with the single ended plastic HMP2 motor.With the exception of fitting the wheels to the axles the construction is similar. In the absence of any other replies happy to scan and send Here are three photos of the earlier chassis, the newer one works on much the same principals These older chassis are far better in that the quality of the wheels and motor are superior to the Plastic D insert wheels and the HMP motor However both models would be improved with more modern wheels, decent small motor and gearbox and perhaps some brake gear By the way, just got some K's plastic wheels which are push fit without the screws, I may actually give them a go on something Link to post Share on other sites More sharing options...
Phil Copleston Posted November 20, 2017 Share Posted November 20, 2017 (edited) In an earlier post (#413), 5050 listed these adverts for K's "Narrow Gauge", including this Southwold Sharpie. But what SCALE are they? And this is what the castings actually looked like: Someone on the 5.5mm Association Facebook webpage claims they are to 5.5mm scale. But I always understood they were to 4mm scale for 12mm gauge (TT) track, i.e. OOn3 or OOn12. Does anyone actually know the scale these K's "Narrow Gauge" castings? Edited November 20, 2017 by Phil Copleston Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted November 20, 2017 RMweb Premium Share Posted November 20, 2017 In an earlier post (#413), 5050 listed these adverts for K's "Narrow Gauge", including this Southwold Sharpie. But what SCALE are they? Early K's OOn3 castings for Southwold Sharps body only -2 (advert c.1960).jpg Early K's OOn3 castings for Southwold Sharps body only -4 (price list advert c.1960).jpg And this is what the castings actually looked like: Early K's OOn3 castings for Southwold Sharps body only -1.jpg Someone on the 5.5mm Association Facebook webpage claims they are to 5.5mm scale. But I always understood they were to 4mm scale for 12mm gauge (TT) track, i.e. OOn3 or OOn12. Does anyone actually know the scale these K's "Narrow Gauge" castings? I can't help you for certain with the scale of the Southwold items, but the 5.5mm. scale range was intended to represent 2'-0'' to 2'-6'' gauges on 12mm. gauge track. I certainly understood at the time that the Southwold items were intended to represent 3'-0'' gauge on 12mm. gauge track - ie. spot-on for 4mm. scale. Regards, John isherwood. Link to post Share on other sites More sharing options...
Phil Copleston Posted November 20, 2017 Share Posted November 20, 2017 I certainly understood at the time that the Southwold items were intended to represent 3'-0'' gauge on 12mm. gauge track - ie. spot-on for 4mm. scale. Regards, John isherwood. Hi John, That's what I thought too! I need to dig out an early 1960s MRN or RM advert to be sure. But I've long believed the kits were marketed as On12. Link to post Share on other sites More sharing options...
wagonman Posted November 21, 2017 Share Posted November 21, 2017 From memory the 2361 class had a different wheelbase to the 2301 class so there's no advantage to re-releasing the kit. Link to post Share on other sites More sharing options...
hayfield Posted November 21, 2017 Author Share Posted November 21, 2017 (edited) From memory the 2361 class had a different wheelbase to the 2301 class so there's no advantage to re-releasing the kit. On the other hand the new releases include new etched chassis, perhaps a body only or with a basic etched chassis ? Do the masters even exist and if so who has them as I have been told the rolling stock is now in the GEM range ? Edited November 21, 2017 by hayfield Link to post Share on other sites More sharing options...
RMweb Gold Ruston Posted December 11, 2017 RMweb Gold Share Posted December 11, 2017 Afternoon everyone, I have been offered a K's kit for a Hudswell Clarke 0-4-0ST. I have looked through this entire thread but no one has mentioned this kit, or posted any photos. Does anyone know anything about this kit at all? I haven't seen it for myself so I would like to know if it's worth me having a look at and would it be worth the asking price of £40? I'm not a collector of these things and if I buy it I would want build it to a working model to run on modern standards of OO track (Peco code 75 bullhead) - would the wheels that come with it be compatible with this? Thanks. Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted December 11, 2017 RMweb Premium Share Posted December 11, 2017 Afternoon everyone, I have been offered a K's kit for a Hudswell Clarke 0-4-0ST. I have looked through this entire thread but no one has mentioned this kit, or posted any photos. Does anyone know anything about this kit at all? I haven't seen it for myself so I would like to know if it's worth me having a look at and would it be worth the asking price of £40? I'm not a collector of these things and if I buy it I would want build it to a working model to run on modern standards of OO track (Peco code 75 bullhead) - would the wheels that come with it be compatible with this? Thanks. I'm not sure that this can be a K's kit - unless it's a Hudswell Clarke from a constituent company of one of the Big Four companies. Regards, John Isherwood. Link to post Share on other sites More sharing options...
hayfield Posted December 11, 2017 Author Share Posted December 11, 2017 K's did a couple of 0-4-0t locos, one being LNER the other being a Taff Vale, might it be a milestone kit ? Anyway if it is a K's the wheels are code 75 compatible, but if they are plastic centred ones they may wobble a bit, and if it has one of those plastic HMP2 motors the chances are that it will need replacing Having said this if the kit is a K's or another make, in good condition and at a fair price I would go for it, even if it needs a new motor and wheels. £40 seems a fair price if its in good condition Link to post Share on other sites More sharing options...
rope runner Posted December 11, 2017 Share Posted December 11, 2017 Afternoon everyone, I have been offered a K's kit for a Hudswell Clarke 0-4-0ST. I have looked through this entire thread but no one has mentioned this kit, or posted any photos. Does anyone know anything about this kit at all? I haven't seen it for myself so I would like to know if it's worth me having a look at and would it be worth the asking price of £40? I'm not a collector of these things and if I buy it I would want build it to a working model to run on modern standards of OO track (Peco code 75 bullhead) - would the wheels that come with it be compatible with this? Thanks. That's a good price, I'd take their hand off. The wheels are next to useless, but a replacement etched chassis frames is available from Ambis - but with EM spacers only. The valve gear is a little over scale, but I'm sure it wouldn't be too hard to make something with a little more finesse. Paul A. Link to post Share on other sites More sharing options...
Devo63 Posted December 11, 2017 Share Posted December 11, 2017 Afternoon everyone, I have been offered a K's kit for a Hudswell Clarke 0-4-0ST. I have looked through this entire thread but no one has mentioned this kit, or posted any photos. Does anyone know anything about this kit at all? I haven't seen it for myself so I would like to know if it's worth me having a look at and would it be worth the asking price of £40? I'm not a collector of these things and if I buy it I would want build it to a working model to run on modern standards of OO track (Peco code 75 bullhead) - would the wheels that come with it be compatible with this? Thanks. If the model is a Hudswell Clarke 0-4-0ST it would be the ex TVR 'S' class no. 267 (GWR 1342). I built one of these many years ago and, for a K's kit, it went together very well. Due to the short wheelbase of the model I had it semi-permanently coupled to a small match truck with extra pickups fitted to avoid stalling on points. As built I used the K's wheels and motor which did last for a surprisingly long time but I have since reduced it to the basic components pending a complete rebuild using new parts. £40 seems quite a reasonable price for the kit if complete and unbuilt. Somewhere I should have a second one built up with no cab and painted light green as an industrial shunter. It did look rather nice but never ran as well as the first, always seeming to run a bit crablike, and spent most of the time sitting in the back of sidings. I may have to dig into the "Great Lost Loco Graveyard" and see if I still have it. Dave R. 1 Link to post Share on other sites More sharing options...
hayfield Posted December 12, 2017 Author Share Posted December 12, 2017 If the model is a Hudswell Clarke 0-4-0ST it would be the ex TVR 'S' class no. 267 (GWR 1342). I built one of these many years ago and, for a K's kit, it went together very well. Due to the short wheelbase of the model I had it semi-permanently coupled to a small match truck with extra pickups fitted to avoid stalling on points. As built I used the K's wheels and motor which did last for a surprisingly long time but I have since reduced it to the basic components pending a complete rebuild using new parts. £40 seems quite a reasonable price for the kit if complete and unbuilt. Somewhere I should have a second one built up with no cab and painted light green as an industrial shunter. It did look rather nice but never ran as well as the first, always seeming to run a bit crablike, and spent most of the time sitting in the back of sidings. I may have to dig into the "Great Lost Loco Graveyard" and see if I still have it. Dave R. Certainly I would use a Highlevel gearbox, with decent wheels (Gibson or Markits) plus one of the more modern small motors, if very careful the K,s wheels may stay true, but if you need to keep removing the wheelsets swap for Markit wheels Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now