Smiffy2 Posted May 3, 2015 Share Posted May 3, 2015 That's looking better already. Link to post Share on other sites More sharing options...
darrel Posted May 4, 2015 Share Posted May 4, 2015 Here is the finished loco before and after weathering just needs some coal 16 Link to post Share on other sites More sharing options...
emperordalek Posted May 4, 2015 Share Posted May 4, 2015 Great weathering job Darrel - you've really transformed it! Wish I could use a an airbrush but as I suffer from asthma - it's a bit of a none-starter. Well done! 1 Link to post Share on other sites More sharing options...
GreenBR Posted May 5, 2015 Share Posted May 5, 2015 Hello Really like the weathering it moves the GBLs into another league Regards Link to post Share on other sites More sharing options...
Phil Howe Posted May 5, 2015 Share Posted May 5, 2015 That looks great Darrel; it's amazing what a difference a little bit of "dirt" can make! Cheers Phil Link to post Share on other sites More sharing options...
railroadbill Posted May 5, 2015 Share Posted May 5, 2015 Fantastic stuff, Darrel! Link to post Share on other sites More sharing options...
RMweb Gold Hroth Posted May 5, 2015 RMweb Gold Share Posted May 5, 2015 Hello Really like the weathering it moves the GBLs into another league Regards I remember reading a quote from the early years of railway modelling (probably by LBSC?) that "a coat of paint hides/covers a multitude of tins...." The excellent weathering job on the Brit seems to bear this out! 2 Link to post Share on other sites More sharing options...
Smiffy2 Posted May 5, 2015 Share Posted May 5, 2015 Are there two mouldings on the tender sides for placing the Triang decals (like Nellie)? Link to post Share on other sites More sharing options...
darrel Posted May 6, 2015 Share Posted May 6, 2015 Yes there are 1 Link to post Share on other sites More sharing options...
Smiffy2 Posted May 6, 2015 Share Posted May 6, 2015 That's pretty inexcusable. Shows that these partworks have no knowledge base about what they're making and selling. But then, why would they? Link to post Share on other sites More sharing options...
RMweb Gold TheSignalEngineer Posted May 6, 2015 RMweb Gold Share Posted May 6, 2015 They only exist to take money off unsuspecting punters, not to know what they are talking about. Link to post Share on other sites More sharing options...
Smiffy2 Posted May 6, 2015 Share Posted May 6, 2015 I think they exist to sell magazines and models to the general public who are not as discerning or critical as hobbyists. And they do a job of it. Link to post Share on other sites More sharing options...
darrel Posted May 6, 2015 Share Posted May 6, 2015 The mouldings are easy to carve off with a sharp knife. If you Intend to repaint the loco. And let's face it with the Britannia you will probably want to repaint it anyway Link to post Share on other sites More sharing options...
Skinnylinny Posted May 6, 2015 Share Posted May 6, 2015 I think they exist to sell magazines and models to the general public who are not as discerning or critical as hobbyists. And they do a job of it. In fairness, the magazines I've had with the models I've bought have generally been pretty interesting and full of things that I (as a rail enthusiast) didn't know. There have been some minor slip-ups (but what magazine can ever claim not to have had any?) but overall, I've actually been impressed with the standard of the magazine, given it's been pitched at the non-enthusiast. Granted, some of the models have been of a poorer quality than others, but they've mostly been very good copies of already-made models, and it's the parentage of the models involved that is to blame. To my mind, the models look good (often with only minor issues), and I'm happy to display them on my shelves until such time as I get around to hacking them about. And I've been keeping the magazines too! Link to post Share on other sites More sharing options...
Ruffnut Thorston Posted May 6, 2015 Share Posted May 6, 2015 (edited) It does seem a little unfair to complain about the locating guides....They were present on models made by Tri-ang Railways, Tri-ang Hornby, Hornby Railways and Hornby... GBL including them shows the resolution of the scanning process! They are not massisve! Edited May 6, 2015 by Sarahagain Link to post Share on other sites More sharing options...
Smiffy2 Posted May 6, 2015 Share Posted May 6, 2015 True. Perhaps the series should also be seen as providing a cheap nostalgia trip for people of a certain age who once ran the Golden Arrow on the lounge carpet. Link to post Share on other sites More sharing options...
emperordalek Posted May 6, 2015 Share Posted May 6, 2015 I notice that the "Buy and Sell" title appears briefly before logging -in, it would be nice for the powers-that-be to give us an update on progess made. The other thing was that given that the GBL Magazines are so thin, if the series is to finish no.41, why issue another free binder for just another ten copies (?), or am I being suspicious??? Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted May 6, 2015 Share Posted May 6, 2015 It's probably an 'unstoppable machine' type process; there was going to be a free binder issued roughly in the middle of the 'second half' of the orignally planned series of 52 issues, and no one got to the 'off switch' in time. Regarding the Britannia, another accurately reproduced inaccuracy of the Triang model is the bogie position, which is too far forward. Altering this was one of the quickest and simplest ways to improve the Triang model's appearance and will work just as well on this replica. Link to post Share on other sites More sharing options...
darrel Posted May 6, 2015 Share Posted May 6, 2015 Could you provid a description of how to move the bogie? Link to post Share on other sites More sharing options...
railroadbill Posted May 6, 2015 Share Posted May 6, 2015 True. Perhaps the series should also be seen as providing a cheap nostalgia trip for people of a certain age who once ran the Golden Arrow on the lounge carpet. Well, Dick, it was the Flying Scotsman for me, actually, but GBL haven't cloned any Hornby Dublo 3 rail.... Link to post Share on other sites More sharing options...
Smiffy2 Posted May 6, 2015 Share Posted May 6, 2015 I'd been hoping for Duchess of Athol. With chipped paint. Or Denbigh Castle. 3 Link to post Share on other sites More sharing options...
Il Grifone Posted May 6, 2015 Share Posted May 6, 2015 (edited) IMHO, cloning the Dublo model would have produced a better model than the one they did... (provided they didn't copy the cab full of motor of the ringfield versions!). I was rather expecting a 'Duchess', but we got the streamlined version and a 'Princess' instead*. It's just as well as I have quite a few** Dublo 'Coronations' already (Still need a 'City of Liverpool', and a C.P.R. 1215, but seeing what they cost, I'll have to do without (or fake them ). I must finishing fitting the Dublo chassis in one of my streamline GBL '6220's (to become 'City of Bristol'). *I'm not complaining though 'Coronation' should be blue of course. (Renaming to do - one will be 'City of Bristol' and the other??? - I could just add a headlight, I suppose, but that would need a train to match......) (The Emoticon is supposed to be a Smiley , like in the toolbar and list, but comes out as moronic!) ** Let's say I'm running out of 'curved frame' names.... Edited May 7, 2015 by Il Grifone Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted May 7, 2015 Share Posted May 7, 2015 Could you provide a description of how to move the bogie? On the Triang original, one removed the bogie by undoing a screw, drilled a new hole for the screw in the bar on which the bogie pivotted, and neatly cut off the overlength end of the bar with the original screw hole, then reattached. A little plastic carving to clear the bogie wheels, and done. That's a memory from the best part of fifty years ago, and I don't have the item to look at anymore, swapped it for a broken 'Kiev' rangefinder camera (which I fixed). On the GBL, saw a chunk out of the casting as required would be my 'starter for 10' answer. But I don't have one to look at, so that is just a suggestion. 1 Link to post Share on other sites More sharing options...
Il Grifone Posted May 7, 2015 Share Posted May 7, 2015 It's quite straightforward. Three screws secure the chassis to the body. One is hidden under the plastic plate that holds the bogie wheels in place, which needs to be unclipped. The locomotive is now in four pieces - body, chassis, front bogie and rear pony truck. At the front of the chassis, there is a boss which holds the bogie in line - this needs to be filed flush. Then drill a new hole for the bogie in the correct place and the job is done. Painting over all that silver and possibly resiting the steps from the bogie to the body is next and then the model can be reassembled. (Further detailing is optional.) 478 1 Link to post Share on other sites More sharing options...
RMweb Premium Brit70053 Posted May 7, 2015 RMweb Premium Share Posted May 7, 2015 (edited) The nameplate looks to be copied from the later 'adhesive label' style, certainly not the early tin plate version which tabbed into the smoke deflectors. John Managed a closer look at the model today and to my surprise there are 'tabs' behind the nameplates affixing them to slots in the smoke deflectors. (The plates also seem to be varnished over on my model.) The lozenge shape of the nameplates on the GBL Britannia is however more akin to the adhesive nameplate labels which adorned later Tri-Ang models. The nameplates on Tri-Ang's earliest offerings were very square ended, ie true rectangles. Edit for clarity. Edited May 7, 2015 by Brit70053 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now