RMweb Gold Phil Bullock Posted July 8, 2015 Author RMweb Gold Share Posted July 8, 2015 One more to add to the never blue group, 838 Rapid withdrawn in maroon with FYE, one of my favourites at the time. Note to Bachmann, please make this one of the next batch. Best regards Of course! Many thanks for the reminder - so that reduces the field down to 29 blue ones. Did mention to Trevor at CMC that D838 would make an excellent Limited edition for exactly that reason - not sure he took the bait though! And quite why Swindon shopped her in repainted maroon when they had already shopped others in blue remains a mystery.... At least one of our initial maroon purchases will become a MFYE - a choice from D834/8/42/44! Kind regards Phil Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted July 8, 2015 RMweb Gold Share Posted July 8, 2015 Re Phil's comments on printed nameplates being larger than the newly fitted etched ones. A trick I used on one of my Heljan Westerns which has printed plates that are larger than some etched plates from at least one manufacturer (e.g. Fox). I used a sharp scriber to very carefully remove the excess printed decal - "catching" the edge of the decal and gently removing. It resulted in a perfect removal without needing T-cut stripping the original decal which always results in a glossy surface, which would need varnishing. One of the later Bachmann 42s D812, Royal Naval Reserve of course was the largest of all Warship plates and a bit of a pain to remove - I have one of these awaiting renumbering. I'm sure my Royal Oak will need similar treatment. Neil Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted July 8, 2015 Author RMweb Gold Share Posted July 8, 2015 https://www.youtube.com/embed/cts0ZCyTDTY enjoy Oh my!!! That is wonderful! is it my imagination or are the nameplates better on the red and green versions? And be careful about installing those roof vents facing in the right direction - don't copy 865 on here!!! Phil Link to post Share on other sites More sharing options...
Ben04uk Posted July 8, 2015 Share Posted July 8, 2015 Was trying to encourage you to do your own research there Ben! 840 & 848 are out too as they went for scrap in maroon but all the others were blue Are you prepared to go back to the early blue livery with 4 arrows, one under each cab? That's another factor Phil My preference is to renumber the BR Blue version to D810 Cockade Link to post Share on other sites More sharing options...
Andy Y Posted July 8, 2015 Share Posted July 8, 2015 My preference is to renumber the BR Blue version to D810 Cockade That's not a Class 43, to do that you'd need Bachmann's previous Class 42. Link to post Share on other sites More sharing options...
Ben04uk Posted July 8, 2015 Share Posted July 8, 2015 That's not a Class 43, to do that you'd need Bachmann's previous Class 42. You are absolutely correct - just wanting to see who was awake at this time. Warship Class 43 no. 855 Triumph was seen at Hayle Wharves on 13 August 1971 so I think this one would be a good one to chose. Link to post Share on other sites More sharing options...
RMweb Premium Gwiwer Posted July 8, 2015 RMweb Premium Share Posted July 8, 2015 (edited) They're coming here anyway but judgement reserved on livery rendition until seen. The promotional video may well have been filmed under strong lighting distorting the appearance but to my eyes the blue appears pale and the maroon rather purple. And should there be orange multiple working covers on class 43? Edited July 8, 2015 by Gwiwer Link to post Share on other sites More sharing options...
RMweb Gold stovepipe Posted July 8, 2015 RMweb Gold Share Posted July 8, 2015 (edited) And should there be orange multiple working covers on class 43? Only the right hand socket was orange or more likely buffer beam red, the left hand plug looks to have been black or green. The MW cables started being removed around 1964, but a handful had them reinstated around 1968/69, e.g. D857. I can't recall seeing a maroon loco with them fitted, but a photo reference is advised! 584 by Alan Curtis, on Flickr Edited July 8, 2015 by stovepipe 4 Link to post Share on other sites More sharing options...
RMweb Gold stovepipe Posted July 9, 2015 RMweb Gold Share Posted July 9, 2015 (edited) And be careful about installing those roof vents facing in the right direction - don't copy 865 on here!!! Phil What is the correct arrangement? Something like this? / / \ \ / \ / / \ \ Edited July 9, 2015 by stovepipe 1 Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted July 9, 2015 Author RMweb Gold Share Posted July 9, 2015 https://www.flickr.com/photos/59835095@N02/6309613233/in/album-72157627920981333/would seem to agree with that Bur then take a look at https://www.flickr.com/photos/59835095@N02/6310136322/in/album-72157627920981333/ and https://www.flickr.com/photos/59835095@N02/6309614293/in/album-72157627920981333/ Uh 0h! What was their hinging arrangement I wonder - could they open either way? Phil Link to post Share on other sites More sharing options...
Andy Y Posted July 9, 2015 Share Posted July 9, 2015 I guess that's possible Phil but at best the arrangement seems to be 'variable', I can't remember which example I chose for the positioning of the review sample now! Link to post Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted July 9, 2015 RMweb Gold Share Posted July 9, 2015 My preference is to renumber the BR Blue version to D810 Cockade "Cockade" was Swindon built 1959 delivered with disc codes originally....in plain green....shock horror.Spotted by me brand spanking new on 3/09/1959 outside Swindon works.....same day as I copped "Deltic" at King's Cross. 1 Link to post Share on other sites More sharing options...
banburysaint Posted July 11, 2015 Share Posted July 11, 2015 (edited) A question was asked about class 43s being worked out of Waterloo. Alan Newman who was at nine elms and waterloo has confirmed that they didn't sign the 43s. He told me amusing stories about being a second man he was in the habit of putting his feet over the fault lights which were on his side. This was because nervous drivers would want to stop so he would only move his feet when they were past Clapham Junction. if you left the roof vents open in the wrong direction you would get exhaust sucked back in through them. when passing through tunnels the floor mats would tend to lift and the cab would be full of dust. he said that the 42s were very variable some were great others absolute basket cases. Edited July 12, 2015 by banburysaint Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted July 11, 2015 RMweb Gold Share Posted July 11, 2015 Hence one of the driver's nicknames for the class 43s "iron lungs" Neil 1 Link to post Share on other sites More sharing options...
Rugd1022 Posted July 12, 2015 Share Posted July 12, 2015 If you left Padd on a 43 and hadn't caught fire by Southall you'd be alright, that was the saying at Old Oak... 2 Link to post Share on other sites More sharing options...
RMweb Premium brushman47544 Posted July 15, 2015 RMweb Premium Share Posted July 15, 2015 (edited) https://www.flickr.com/photos/59835095@N02/6309613233/in/album-72157627920981333/would seem to agree with that Bur then take a look athttps://www.flickr.com/photos/59835095@N02/6310136322/in/album-72157627920981333/andhttps://www.flickr.com/photos/59835095@N02/6309614293/in/album-72157627920981333/Uh 0h! What was their hinging arrangement I wonder - could they open either way?Phil A question was asked about class 43s being worked out of Waterloo. Alan Newman who was at nine elms and waterloo has confirmed that they didn't sign the 43s. He told me amusing stories about being a second man he was in the habit of putting his feet over the fault lights which were on his side. This was because nervous drivers would want to stop so he would only move his feet when they were past Clapham Junction. if you left the roof vents open in the wrong direction you would get exhaust sucked back in through them. when passing through tunnels the floor mats would tend to lift and the cab would be full of dust. he said that the 42s were very variable some were great others absolute basket cases. These two posts seem to have missed out on further comment, but it would appear that the vents open both ways and should all be open the same way. So if we model them open to be totally realistic we should then only run the locks one way except for shunting? Edited July 15, 2015 by brushman47544 1 Link to post Share on other sites More sharing options...
robertcwp Posted July 15, 2015 Share Posted July 15, 2015 (edited) These two posts seem to have missed out on further comment, but it would appear that the vents open both ways and should all be open the same way. So if we model them open to be totally realistic we should then only run the locks one way except for shunting? They seem to be the same way in this view: 842_Exeter_30-7-71 by Robert Carroll, on Flickr But not in this one: 842_Undated by Robert Carroll, on Flickr Or this one: D858_Teignmouth by Robert Carroll, on Flickr Edited July 15, 2015 by robertcwp 8 Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted July 15, 2015 RMweb Gold Share Posted July 15, 2015 (edited) A question was asked about class 43s being worked out of Waterloo. Alan Newman who was at nine elms and waterloo has confirmed that they didn't sign the 43s. He told me amusing stories about being a second man he was in the habit of putting his feet over the fault lights which were on his side. This was because nervous drivers would want to stop so he would only move his feet when they were past Clapham Junction. if you left the roof vents open in the wrong direction you would get exhaust sucked back in through them. when passing through tunnels the floor mats would tend to lift and the cab would be full of dust. he said that the 42s were very variable some were great others absolute basket cases. Certain ex-Southern drivers became quite adept at putting the worst of the 42s that got dumped onto the Exeter-Waterloo route out of their misery. I once rode behind one that received the coup de grace departing from Whimple - downhill. John Edited July 15, 2015 by Dunsignalling 1 Link to post Share on other sites More sharing options...
banburysaint Posted July 16, 2015 Share Posted July 16, 2015 These two posts seem to have missed out on further comment, but it would appear that the vents open both ways and should all be open the same way. So if we model them open to be totally realistic we should then only run the locks one way except for shunting? That is how i understood it from Alan. He is on nights and then rest days, so i have sent him an email as i wont see him until the middle of next week. When i have confirmed i will post on here. Link to post Share on other sites More sharing options...
robertcwp Posted July 17, 2015 Share Posted July 17, 2015 This would be a good livery variation for a future release, and a style unique to Class 43s (846 and 847): D847_TivertonJunction_9-4-67 by Robert Carroll, on Flickr 6 Link to post Share on other sites More sharing options...
Rugd1022 Posted July 17, 2015 Share Posted July 17, 2015 Good call Robert, and worth noting the minor difference between the two in that D847's numbers were placed closer to the doors than those on D846. It's not often mentioned in the various Hydraulic books etc, but 846 also went on to receive the final version of blue / full yellow ends with the logo below the nameplate and corporate number style on the cabsides, minus the D prefixes, this would make an intersting model from Bachman 43... Link to post Share on other sites More sharing options...
Horsetan Posted July 17, 2015 Share Posted July 17, 2015 ^^What is that boiler in the background of the photo above? Is it from a Dean Goods? Didn't know it was still extant in 1971. Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted July 17, 2015 RMweb Gold Share Posted July 17, 2015 ^^ What is that boiler in the background of the photo above? Is it from a Dean Goods? Didn't know it was still extant in 1971. It might have come from a pannier although the dome looks rather large. But don't forget there were stationary boilers all over the place and many were ex-loco boilers which could have survived for a long time after their chassis had ceased to exist. Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted July 17, 2015 Author RMweb Gold Share Posted July 17, 2015 (edited) This would be a good livery variation for a future release, and a style unique to Class 43s (846 and 847): D847_TivertonJunction_9-4-67 by Robert Carroll, on Flickr Nice shot Robert! 842 will be rapidly morphing in to this livery as D847 when it arrives Work to do? Nameplate logo and numbers off, loose those headcode vents, OHLE flashes on nose moved up.... And there are no drivers name card holders on any of the Bacchy versions - some etched brass 1/32 .5 calibre ammo belt clips are a good representation if we can find any..... Renumber, logo, flashes and nameplates... varnish and light weathering, hope that nice new windscreen comes out easily. Phil Edited July 17, 2015 by Phil Bullock Link to post Share on other sites More sharing options...
banburysaint Posted July 17, 2015 Share Posted July 17, 2015 Re the vents. Alan has replied. Only open the front cabs vents not the back. However if you ran above 60mph you should open the leading side cab window by 2 inches to avoid the lifting of floor boards of dust problem from the partial vacuum. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now