Pufferman Posted February 6, 2013 Share Posted February 6, 2013 I have a couple of MPVs and have weathered one. As people who have them know, the parts on the back come off. How do people fix these to the chassis? Want to keep handing the parts down as I have weathered one. Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted February 6, 2013 RMweb Premium Share Posted February 6, 2013 Blu-tac or similar. I have also used double sided tape on my SJR kit. Cheers, Mick Link to post Share on other sites More sharing options...
hammy Posted February 7, 2013 Share Posted February 7, 2013 Also u may want to drill the fixing holes a little wider found mine were a touch tight Link to post Share on other sites More sharing options...
Nile_Griffith Posted January 2, 2014 Share Posted January 2, 2014 Possibly a bit late to join in with this but here goes. For "Oooooooooooooooooooooo" factor Bachmann's MPV is a winner. The fine detail is stunning and for what appears to be quite a delicate model it feels reasonably robust. However I'm not the happy chappie I should be. As noted in a previous post. the modules don't fit particularly well and not just because the lugs and holes don't interface particularly well. The powered end of my model has a slight but definite bend in the chassis, the sole bar has a slight but perceptible frown. So that when I attempt to fit the central module it sits up at one end (at least I have a choice of which end tips up). More annoying still. Is that on the non motored end the bogey end away from the cab has about 50% more clearance between the top of the bogie and the sole bar than at the cab end. So giving the cab end a kind of nose down appearance. I'm afraid it's back to the shop with this one, but has anyone out there had similar problems???????? Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.