RMweb Gold Bucoops Posted September 12, 2020 RMweb Gold Share Posted September 12, 2020 55 minutes ago, MJI said: My DMU complete except for cab interiors. Mix of etched sides, kit components, rtr parts, and resin cast. Am I the only one scared for the safety of that unit? 1 4 Link to post Share on other sites More sharing options...
Chuffer Davies Posted September 12, 2020 Share Posted September 12, 2020 4 minutes ago, Bucoops said: Am I the only one scared for the safety of that unit? I had the exact same thought.. :-) 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Tony Wright Posted September 12, 2020 Author RMweb Gold Share Posted September 12, 2020 1 hour ago, Darryl Tooley said: The two or three examples of this diagram in the Seabrook Collection all have rainstrips. They are also indicated on LNER drawing No 13232N. D Thanks Darryl, It's out with the Microstrip and plastic solvent for me! Regards, Tony. 2 Link to post Share on other sites More sharing options...
Headstock Posted September 12, 2020 Share Posted September 12, 2020 4 hours ago, Porcy Mane said: No fun in that. Good for you P, perhaps your reanimation may have an expressionist bent, or a touch of the Gothic, as a tribute to the greatest teenage author of all time and inventor of the science fiction genre. Link to post Share on other sites More sharing options...
Headstock Posted September 12, 2020 Share Posted September 12, 2020 1 hour ago, Bucoops said: Am I the only one scared for the safety of that unit? Good point, I see a mask but it isn't being worn properly. 2 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted September 12, 2020 RMweb Premium Share Posted September 12, 2020 3 minutes ago, Headstock said: Good point, I see a mask but it isn't being worn properly. Remember one car has a power bogie Link to post Share on other sites More sharing options...
Porcy Mane Posted September 12, 2020 Share Posted September 12, 2020 7 minutes ago, Headstock said: perhaps your reanimation may have an expressionist bent, or a touch of the Gothic The re-animation is complete (bar the gimmick of a smoke unit & a Lambton cab). To move it t'ward the fictional, a new name plate would need to be ordered. Perhaps Frank? (I once temporarily named a loco Kevin) Maybe Wollstonecraft? or possibly one of her better known quotes. "Go forth & prosper" although I admit to preferring the modern adaptation. Probably better to keep it as delivered and keep the original name, "Hazard". Just as ridiculous but prototypical. Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted September 12, 2020 RMweb Gold Share Posted September 12, 2020 Today has definitely been one of the most productive modelling days I've had in forever. The underframe is almost done on the full brake. I've ben using the Isinglass drawing as the source of info - I've not got any photos of a real one unfortunately. If anything is in the wrong place, please tell me, however I may go "la la la not listening" if it's a major issue! Spotted when taking the last photo - the right hand bogie is wonky. I shall have to investigate! 15 3 Link to post Share on other sites More sharing options...
RMweb Gold Tony Wright Posted September 12, 2020 Author RMweb Gold Share Posted September 12, 2020 20 minutes ago, Bucoops said: Today has definitely been one of the most productive modelling days I've had in forever. The underframe is almost done on the full brake. I've ben using the Isinglass drawing as the source of info - I've not got any photos of a real one unfortunately. If anything is in the wrong place, please tell me, however I may go "la la la not listening" if it's a major issue! Spotted when taking the last photo - the right hand bogie is wonky. I shall have to investigate! It looks all right to me, Rich. Thanks for showing us. Regards, Tony. 1 1 Link to post Share on other sites More sharing options...
Headstock Posted September 12, 2020 Share Posted September 12, 2020 1 hour ago, Porcy Mane said: The re-animation is complete (bar the gimmick of a smoke unit & a Lambton cab). To move it t'ward the fictional, a new name plate would need to be ordered. Perhaps Frank? (I once temporarily named a loco Kevin) Maybe Wollstonecraft? or possibly one of her better known quotes. "Go forth & prosper" although I admit to preferring the modern adaptation. Probably better to keep it as delivered and keep the original name, "Hazard". Just as ridiculous but prototypical. Good evening P, I quite like "Hazard", perhaps with some electrical flashes, for slightly more modern adaptation. 1 Link to post Share on other sites More sharing options...
ROY@34F Posted September 12, 2020 Share Posted September 12, 2020 (edited) 12 hours ago, Tony Wright said: Thanks Mike, As usual, one of the cabside windows is 'open'. Were there any occasions when both were shut? Regards, Tony. Only maybe when it's pelting rain or snow in on that side of the engine Tony . Note also on that last photo on Mike Trices' thread . Note also the little wooden armrest for the driver in the window opening which hinged down to close the window . But then you probably knew that . Regards , Roy . Edited September 12, 2020 by ROY@34F for grammar 1 1 Link to post Share on other sites More sharing options...
MikeTrice Posted September 12, 2020 Share Posted September 12, 2020 8 hours ago, ScRSG said: A trio of Trice's, Three of Mike Trice's most excellent V2 bodies added to Comet chassis and weathered to typical Scottish Region standards of the early 60's. A couple of comments on the building of these, if I may, firstly , watch the delicate steps! They are extremely fragile (ask me how I know). Secondly, due to the method of detaching the Comet chassis, the first move is to lower the rear end and then move the chassis backwards slightly to release the front. This, unfortunately can put pressure on the front part of the footplate which can cause a fracture (again, ask me how I know!) So to help this I added strips of brass as strengtheners as shown here - Hope this helps, but they do all make up very nicely. Chas Beautiful. If you had not mentioned they were my prints I would not have known. 3 1 Link to post Share on other sites More sharing options...
ROY@34F Posted September 12, 2020 Share Posted September 12, 2020 10 hours ago, drmditch said: Good Morning. This thread moves so fast that no sooner do I see something to which I could make a contribution then it it has vanished somewhere in the previous decade/century/millennium! (Sometimes I can make search engines work and sometimes not but i prefer to spend the time on proper engines with actual wheels!) So, to catch up a bit I've prepared some material which I will put into separate posts to avoid making one very long one and to make reference easier! (Obviously these can be removed if anyone objects to my prolixity!) There was a discussion about LNER large engine cab/tender doors. Here are some pictures of the V2 arrangement on 4771. (I am sure that at some point Mr Trice has probably taken better pictures.) Then the nice simple pintle hinges! First the 'locomotive side':- Then the 'tender' side:- At the moment Locomotion is open Wednesday to Sunday, from 11:00am to 4:00pm, and visitors can climb steps to look into the cabs, but are not allowed into the cabs themselves. (Footplates were not designed for 'social distancing'!) If you do want to come and visit, then it it is advisable to book a ticket first. These are free of charge, but the ticketing system is sensible not only for traceability, but to allow control of the number of people in the building at one time. Bookings available here I am back to being on-site on Fridays, welcoming people and explaining and discussing where required. If you do visit on a Friday do say hello! (Remember, unlike our 'big sister' at York, car parking is free!) Caroline Middleditch Super photos there Caroline , of cab doors I was trying to describe some pages back when the discussion was on . I remember them well . Thanks Regards , Roy . Link to post Share on other sites More sharing options...
Popular Post LNER4479 Posted September 12, 2020 Popular Post Share Posted September 12, 2020 5 hours ago, Tony Wright said: One or two more shots of the two latest Pacifics on Little Bytham. GREAT EASTERN now gives me 15 A1s (with two more still as kits). That should be enough! I think Geoff Haynes' painting of the crest is delightful. Funny you should mention an A1, especially a roller bearing fitted one ... Caught up with the 12" to 1foot scale one today and enjoyed a non stop run over Beattock to Edinburgh - note the 64B shedplate carried for the occasion. You'll have noticed by now that she's back in the livery that no doubt yourself and others remember the class most by. You could see your own reflection in that smokebox door - bet that won't last very long. Not too many wrinkles on the bodyside? 22 Link to post Share on other sites More sharing options...
RMweb Premium 31A Posted September 12, 2020 RMweb Premium Share Posted September 12, 2020 31 minutes ago, ROY@34F said: Super photos there Caroline , of cab doors I was trying to describe some pages back when the discussion was on . I remember them well . Thanks Regards , Roy . Didn't catch your fingers in them I hope Roy! 1 Link to post Share on other sites More sharing options...
ROY@34F Posted September 12, 2020 Share Posted September 12, 2020 31 minutes ago, 31A said: Didn't catch your fingers in them I hope Roy! I don't recall doing that Steve but it was a long time ago now . Thanks for your concern though . Regards , Roy . 1 1 Link to post Share on other sites More sharing options...
Woodcock29 Posted September 12, 2020 Share Posted September 12, 2020 7 hours ago, jrg1 said: Assistance, please. I have acquired various models form a deceased estate, and this includes the enclosed horsebox, for which there are no instructions or any means of identification. Can anyone supply details of the vehicle in question, and the model manufacturer, please? Hi John As others have said this is the Parkside kit and is Dia 5. I actually bought one from the same estate to join one I already had. I finished mine from the estate earlier this year and it actually had a run on Spirsby yesterday! Later today I'll send you instructions and other info I have. Andrew 1 Link to post Share on other sites More sharing options...
drmditch Posted September 12, 2020 Share Posted September 12, 2020 33 minutes ago, Woodcock29 said: Hi John As others have said this is the Parkside kit and is Dia 5. I actually bought one from the same estate to join one I already had. I finished mine from the estate earlier this year and it actually had a run on Spirsby yesterday! Later today I'll send you instructions and other info I have. Andrew You might also find my version and notes and links helpful........ See here..... (Although I missed the rainstrips as well!) 1 1 Link to post Share on other sites More sharing options...
Mike 84C Posted September 12, 2020 Share Posted September 12, 2020 Not like those finger pinching doors fitted on LMS engines. With a damn great spring to keep them shut. Yes I did and yes it hurt! 4 Link to post Share on other sites More sharing options...
RMweb Gold TheSignalEngineer Posted September 12, 2020 RMweb Gold Share Posted September 12, 2020 (edited) On 11/09/2020 at 09:59, Tony Wright said: 1. There's been a diminishing of folk actually making things, particularly locomotives and, to a lesser extent, rolling stock (ironically, Covid might have had the opposite effect, but I can't tell first-hand). This might be because of improved RTR (which, to be fair, is now often better than what many could make for themselves; and, it's usually considerably cheaper). As far as locos are concerned I think the improvements in RTR have cut down making it yourself. For my own particular modelling area and timescale I can only think of two regular performers not available RTR or announced by the mainstream sources. Those would be the Johnson 2F and Stanier 3P. Some of the others are a little long in the tooth but mostly not too bad with e bit of embellishment. Coaching stock has improved a lot but from my point of view there is a big hole with LMS Open stock, which I have built using Comet sides, and Period 1/2 stock some of which was around from 1925 to the mid-1960s. I've also just started on some Gresley Opens for my ER excursions set. Wagons have also improved a lot, but we still only have a generic 5 plank and tank wagons. Again many are a good basis for a bit of improvement but to get the variety I want I have a lot of kits from Parkside, Cambrian and Chivers amongst others. Some are from now-defunct sources but can be picked up if you look and wait. 2. The number of new kits being made available (again, particularly locomotives) has also diminished (cause and effect?). I think full loco kits have diminished although I don't usually build complete locos myself, only a bit of alteration to RTR. The range of carriages and wagons that it is possible to build if you are doing about WW2 to 1964 is quite extensive. I think modern methods such as 3-D printing may change the market with made to order copies of things people have produced for their own modelling. 3. Far more layout I see at shows and in the press seem to be much the same; again, with regard to locos and rolling stock. And, in several cases, there's a proliferation of RTP buildings/structures. The corollary of this is the smaller number of scratch-/kit-built items, and this is not just in OO. I would agree that what is on display is now quite repetitive. I am not 'turned on' by a layout full of 16T minerals with a 9F and a standard brake van or lots of the same 12T box vans 4. The general standard of layouts in general at shows has never been higher in terms of presentation/appearance/lighting. However, I wish I could say the same for the running on some of them. Many of these layouts represent the BR steam/diesel transition period. That's why it's refreshing (at least to me) to see, say, a pre-Grouping depiction where, out of necessity, much more will have been made. More and more layouts are controlled currently by DCC (which doesn't always improve the running!) and many now have (annoying?) sound, often too loud! Standards of construction have gone up. Maybe this is because improved RTR stock has given more time for the infrastructure. Operationally some excellent looking layouts are abysmal. My particular bugbear used to be badly loaded wagons. I remember one particular layout I have seen at least three times and has featured in the mags which has a conflat loaded with an A type container firmly fixed at one end. To me in instant fail. I enjoy pre-1948 layouts as they need a lot more work both in finding information and building sufficient stock of the right types. My pet hate is DCC sound fitted TMD layouts with 12 Class 66 all in different liveries which wouldn't be around together in timescale or location. I seems a pre-requisite of these layouts to show how clever you are by setting all of the locos to produce maximum noise at the same time. Besides that sort of thing why do we have to have lots of DCC train noise and no background sounds? just listen to those great old Transacord discs. Railways in reality have urban or rural background noise, traffic, station staff talking to the crew during a stop, block bells from the signalbox window............ 5. Though I have no 'hard' evidence (other than talking with the manufacturers) most kits (particularly those for locos) are never finished to complete satisfaction. This is substantiated by the number I've seen bought off eBay (not by me; it's as mysterious as nuclear physics!), where many are just a mess. When I say 'complete satisfaction', I admit, that's subjective, but many I've seen don't run well, are glued together and are painted with tar! It took me a long time of fiddling with kit bashing and painting to get to an acceptable level of modelling. Some people just don't have the patience to do it. When I made the model of my Grandad's Lineman's Cabin which appeared on Black Country Blues it took me a whole day to produce the three window frames to a standard that I thought was needed for a layout under the glare of publicity like that was. There is only one known photo which I took in 1967 and no drawing to work to, so getting it to look right was a long process over about two months. 6. There is more of a reluctance now for folk to 'alter' what they've bought (in case it decreases the value?). 'Oh, I've just spent £XXX on that model and by improving/altering/renumbering/renaming/weathering it it'll be devalued. Anyway, if I keep it mint/boxed it'll appeal to collectors'. What has happened to the notion of 'improving' something? I don't like that collector approach myself. very little of what I have is pristine, my first modification job was to weather a Hornbt Dublo 8F. My railway runs in the days of Urban Grot, so I want the trains to fit in with that. 7. Where 'personal' alterations to RTR stuff have taken place (particularly with regard to weathering), the results can be stupendous. This is an area where things are better than they've ever been (at least in my view). For someone to be almost 'apologising' for not building kits is nonsense. Nonsense, when weathering like this brings a pair of (modified) Bachmann RTR locos to life; the work of Tom Foster. I certainly think that a lot of RTR can be improved by slight additions and subtle weathering as long as it is not overdone and in the right shades for the type of stock and period. The colour of 'track dirt' has changed over the years with the change in traction, materials carried and type of brakes. You get a different type of grot from old fashioned Iron on wheel rim brakes to that from modern composite disc brakes, and of course fitted freight stock with the brake pipes actually connected was a rarity before the 1960s. The stock on the railway was also a mixture of new build, complete overhaul and local patch up. My stock is evolving from pristine through about ten stages to unidentifiable grot. For example 16T minerals were still being built in my setting so were between ex-works and about 15 years old so are painted up accordingly and mixed in with 7-planks varying from done up quite well to ex PO with a few bits of name showing, mostly a dirty coal dust colour with a few unpainted new planks around. 8. More folk seem to be paying to have their modelling done by others for them, even to the extent of not being able to fit decoders themselves! A case of upbringing and changing times? My Grandfather who was the biggest influence on me worked for a cycle builder before WW1. After the was he joined the LNWR in the days when most of the railway on the ground you built up as you went along. Training with him I learned a lot about metalworking and woodworking, and how to keep things running by repairing and making copies of broken parts. He could make something out of nothing so it seemed. The fence at the bottom of his garden was built c1956 from matchboarding recovered during the replacement of Vauxhall and Duddeston signal box. It was still standing over 40 years later. Some window frames and floorboards made cold frames for the garden. In my shed I am still using a stool which he made in the early 1950s. Following his lead I still do most things myself, decorating, gardening, minor household repairs, etc where I possibly can. 9. An encouraging sign is that there are some fine, younger modellers out there; and I stress the term 'modellers'! Those who actually make things for themselves, are keen to learn and, most importantly, are 'not afraid'. I've seen some good stuff around recently. A few of the younger generation are embracing modern technology to make more detailing such as trackside and on-track equipment found on the modern railway. 10. in actual terms, RTR items are not more expensive than they ever were (under £200.00 for a forthcoming RTR Hornby A2/3 - half that of a complete kit!). That said, kit components seem to be increasing in price. Relative to other prices locos have probably not gone up very much especially when you compare the quality of current offerings. Hornby Dublo's late offering of the rebuilt WC retailed at £5 15s 6d in old money. That is the equivalent of about £125 today. I have noticed an increase in price of some components for my home-spun stuff. Wheels from the big manufacturers have increased out of all recognition and the last pack of wheel bearings I bought had gone up by about 50% 11. The age profile in the hobby has never been at a higher average, which probably means a glut of items coming on the market in the not-too-distant future; at lower prices? Supply and demand? I think there has definitely been a levelling off in the price of older stuff e.g. fairly common Hornby Dublo items go quite cheaply, although boxed good condition rare stuff still seems to fetch silly prices if two or three people are chasing it. 12. Some clubs might not survive for much longer, and not just because of Covid. Which asks the question, how many exhibitions will return? I think that's a bit of chicken and egg. Clubs promote exhibitions and exhibitions financially sustain clubs. I think some clubs will go under as the costs of running a venue are too great these days. There are also too many counter attractions. Society is based too much these days on 'Instant Gratification', hence the rise in the amount and quality of RTR. 13. We've never had it so good! As far as what is available RTR we definitely haven't, and with on-line shopping the range of materials and ready made components available is probably as good as ever. Sorry for a long-winded reply, but I think the original post raised many good points and these are some of my own views. Eric Edited September 12, 2020 by TheSignalEngineer 7 2 1 Link to post Share on other sites More sharing options...
jrg1 Posted September 12, 2020 Share Posted September 12, 2020 Many thanks for the heads up! Bill did an excellent job constructing the kit, and I will now fit the wheelsets (Masokits P4 units) and paint it. Much appreciated. Link to post Share on other sites More sharing options...
richard i Posted September 13, 2020 Share Posted September 13, 2020 7 hours ago, TheSignalEngineer said: When I made the model of my Grandad's Lineman's Cabin which appeared on Black Country Blues it took me a whole day to produce the three window frames to a standard that I thought was needed for a layout under the glare of publicity like that was. There is only one known photo which I took in 1967 and no drawing to work to, so getting it to look right was a long process over about two months. Eric Two months a long process! Come to pre grouping, I have spent a 8 months just cutting out the pieces to make 4 carriages. The build then followed. 18 months from start to finish. richard 5 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted September 13, 2020 RMweb Premium Share Posted September 13, 2020 4 minutes ago, richard i said: Two months a long process! Come to pre grouping, I have spent a 8 months just cutting out the pieces to make 4 carriages. The build then followed. 18 months from start to finish. richard Now I understand your signature line... 1 Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted September 13, 2020 RMweb Gold Share Posted September 13, 2020 12 hours ago, Bucoops said: Spotted when taking the last photo - the right hand bogie is wonky. I shall have to investigate! Investigations complete - and side frame repositioned so it is straight. Oops Lots of fiddly bits to do now. I may be some time... 8 Link to post Share on other sites More sharing options...
RMweb Premium PMP Posted September 13, 2020 RMweb Premium Share Posted September 13, 2020 (edited) 22 hours ago, Tony Wright said: Thanks Paul, (snip) Could this be more of a generational thing? Certainly, with regard to Bassett Lowke, it would seem that most of the collectors are getting on (have you ever been to a Bassett Lowke Collectors' Society Convention, held every two years in Tewin near Welwyn? I felt like a child!). It would seem that collections keep on coming back on to the market, increasing the supply to satisfy a diminishing demand. Regards, Tony. I think that’s right, I never got to go to the Tewin event, I think it was a owners group private meeting. I think BL and early Hornby and German tinplate will retain their value as so little was made (b/l) or stayed pristine (Hornby etc). I think people cottoned on to that hence the Wrenn collectors. However because more people were aware of the ‘value’ of old trains there were more collectors looking to get pleasure+return from those models. As those chaps pass their collections come on the market, but contemporary RTR eclipses them by a country mile, so there’s relatively little interest for layout stock, except for other fewer collectors. When you look at a Dublin/Wrenn Castle vs a contemporary Hornby release, why choose the old one? We know they ran well, but so do the contemporary releases which also look like museum quality, vs the historic ‘toy’ appearance. Edited September 13, 2020 by PMP Last para 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now