RMweb Gold Tony Wright Posted September 1, 2020 Author RMweb Gold Share Posted September 1, 2020 13 hours ago, thegreenhowards said: I agree Tony! This was created from cutting and shutting Kirk kits. it took a lot of cuts and is not the finest model, but I enjoyed the challenge of making it. It’s written up on my workbench thread starting here: What strikes me most about the BR branding on this vehicle (both prototype and model) is the position of 'Kitchen Car', below the lower panel central beading. Was this unique? Even in carmine/cream (where there was less space), the lettering tended to be above. Regards, Tony. Link to post Share on other sites More sharing options...
RMweb Premium thegreenhowards Posted September 1, 2020 RMweb Premium Share Posted September 1, 2020 (edited) Tony, I can’t comment on whether it was unique, but certainly unusual. The other point about this livery is the apparent lack iof lining. We discussed at the time I was building it whether the lining was there but indistinct or whether the vehicle was in coach brown livery. But that is unlikely if we believe the 1957 date. I went with unlined maroon as the most likely unusual livery, but I can’t be sure this is right. Regards Andy Edited September 1, 2020 by thegreenhowards Grammar 1 Link to post Share on other sites More sharing options...
RMweb Gold Tony Wright Posted September 1, 2020 Author RMweb Gold Share Posted September 1, 2020 55 minutes ago, Chamby said: And a decade (eg: eighties), century (eg: twentieth) and millennium are not proper nouns, but era’s (eg: Edwardian) and epoch’s (eg: Cretaceous) are. A year is not, but Anno Domini is... don’t you just love the English language! It's probably best if any more 'English' discussions are kept to PMs (even though I'm responsible for starting it all up again). That said, why has the 'blight' of incorrect apostrophes become so prominent in English? Why is it now so common that plurals are granted apostrophes? One sees references to 'Pacific's' when it's not singularly possessive, but plural. It makes me rather cross! Isn't there some (splendid) guy going around correcting all the incorrect apostrophes on signs? In my case, the most-recent expression of incorrect apostrophe usage occurred in my driving through rural Norfolk to visit our younger son in Norwich. A sign by the side of the road proclaimed (in dribbled paint) 'DEANS LOG'S'! Regards, Tony. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted September 1, 2020 RMweb Premium Share Posted September 1, 2020 (edited) 3 minutes ago, Tony Wright said: incorrect apostrophes If in doubt, leave it out. Unfortunately most apostrophe crime is committed by those who do not pause to doubt. Edited September 1, 2020 by Compound2632 2 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted September 1, 2020 RMweb Premium Share Posted September 1, 2020 1 hour ago, Joseph_Pestell said: Edwardian, whilst properly capitalised, is not a noun, proper or otherwise. It can be an adjectival noun, as in "He was an Edwardian". Presumably it is capitalised because it is derived from Edward. That doesn't explain Cretaceous though. Dare I ask how folk pronounce "Edwardian"? Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted September 1, 2020 RMweb Premium Share Posted September 1, 2020 16 minutes ago, St Enodoc said: It can be an adjectival noun, as in "He was an Edwardian". Presumably it is capitalised because it is derived from Edward. That doesn't explain Cretaceous though. Dare I ask how folk pronounce "Edwardian"? You know nuffing, they are called Teddy Boys. 1 7 Link to post Share on other sites More sharing options...
LNER4479 Posted September 1, 2020 Share Posted September 1, 2020 54 minutes ago, Tony Wright said: Isn't there some (splendid) guy going around correcting all the incorrect apostrophes on signs? If he were, I suggest he be formally appointed as the Apostropher Royal 5 4 Link to post Share on other sites More sharing options...
Anglian Posted September 1, 2020 Share Posted September 1, 2020 49 minutes ago, St Enodoc said: It can be an adjectival noun, as in "He was an Edwardian". Presumably it is capitalised because it is derived from Edward. That doesn't explain Cretaceous though. Dare I ask how folk pronounce "Edwardian"? Dame Maggie Smith pronounced it 'Ed-whar-dee-yan' in an episode of Downton Abbey. I presume there had been some research behind that choice. I'd say 'Ed-ward' rather than 'Ed-whar'. 1 Link to post Share on other sites More sharing options...
gr.king Posted September 1, 2020 Share Posted September 1, 2020 2 hours ago, Tony Wright said: Odd, isn't it? That the four seasons are never granted the status of 'proper' nouns, Yet Frankie Valli is. 1 3 9 Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted September 1, 2020 RMweb Gold Share Posted September 1, 2020 22 minutes ago, Anglian said: Dame Maggie Smith pronounced it 'Ed-whar-dee-yan' in an episode of Downton Abbey. I presume there had been some research behind that choice. I'd say 'Ed-ward' rather than 'Ed-whar'. I pronounce it the same as the Dame it would seem. Get me, the posh boy! 1 2 1 Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted September 1, 2020 RMweb Gold Share Posted September 1, 2020 I seem to be getting the hang of using the RSU. Still the odd excessive blob of solder cream, but the only "prep" I have done on these RDEB sides is to rub the brass with a scouring pad, soldered it, then rubbed it again to remove the carbon marks from where I have moved the probe. The panels FEEL well attached but I guess the real test will be when I form the turnunder. I need to open out the hinge slots first and also do a bit of scratch brush work to remove the small bits of excess solder. 14 1 Link to post Share on other sites More sharing options...
Popular Post grahame Posted September 1, 2020 Popular Post Share Posted September 1, 2020 If anyone is interested here a little fun project I started on Saturday afternoon. It's a scratch-built N/2mm scale low-relief cinema. I don't actually need a cinema but I'm basing it on the cinema in Chatham High Street where I had a Saturday job in the early 70s. The cinema has recently been demolished and a block of flats built in it's place. Here's how far I've got to date. I've also made the 'A', 'B' and 'C' letter signs but haven't finished or fitted them. Below is an early pic showing them sitting on the building wall (not glued) with the building lying flat. Then I rotated the photo to show what they look like in position roughly upright. They're a little oversize and chunky but'll have to do. Raised letters and stand-off mounting brackets need to be added so that they are not fixed up against the brickwork; 20 21 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post Tony Wright Posted September 1, 2020 Author RMweb Gold Popular Post Share Posted September 1, 2020 Another loco I've made featuring cab doors and a fallplate................. The loco is built from a DJH kit and painted by Geoff Haynes. The gap 'twixt loco and tender is wider than wholly desirable, but these are very long locos and it's made to run on other systems as well as Little Bytham. Its construction featured in the RM to coincide with the York Show this year, where it would have run on Shap. Next year? 14 6 1 Link to post Share on other sites More sharing options...
rowanj Posted September 1, 2020 Share Posted September 1, 2020 I hadn't realised there was more than one way to say "Edwardian" "Cretaceous" is a proper noun but a weak proper name, so would normally be prefixed e.g. by "The". Isn't that fascinating? This is my first attempt at a 6-wheel Luggage Van. It's a D&S kit of an ex-NER version. The roof has yet to be affixed, and glazing and a few details are still to be added, and the bolts tightened to fix the body flush to the chassis. But you get the idea. 13 Link to post Share on other sites More sharing options...
LNER4479 Posted September 1, 2020 Share Posted September 1, 2020 41 minutes ago, Tony Wright said: Another loco I've made featuring cab doors and a fallplate................. The loco is built from a DJH kit and painted by Geoff Haynes. The gap 'twixt loco and tender is wider than wholly desirable, but these are very long locos and it's made to run on other systems as well as Little Bytham. Its construction featured in the RM to coincide with the York Show this year, where it would have run on Shap. Next year? Fingers crossed... 1 2 Link to post Share on other sites More sharing options...
CUTLER2579 Posted September 1, 2020 Share Posted September 1, 2020 (edited) 8 hours ago, gr.king said: Yet Frankie Valli is. This topic seems to be drifting from Season to Season . Edited September 1, 2020 by CUTLER2579 2 3 Link to post Share on other sites More sharing options...
stewartingram Posted September 1, 2020 Share Posted September 1, 2020 (edited) 9 hours ago, Clive Mortimore said: You know nuffing, they are called Teddy Boys. You really mean "nuffink" surely? Edited September 1, 2020 by stewartingram 5 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted September 1, 2020 RMweb Premium Share Posted September 1, 2020 16 minutes ago, stewartingram said: You really mean "nuffink" surely? We're posh from Bedford. 1 1 8 Link to post Share on other sites More sharing options...
grahame Posted September 1, 2020 Share Posted September 1, 2020 9 hours ago, Clive Mortimore said: You know nuffing, they are called Teddy Boys. Edwardians, Teddy boys, bovver boys or whatever, they were all known as ruffians in our household. 1 Link to post Share on other sites More sharing options...
RMweb Gold 96701 Posted September 1, 2020 RMweb Gold Share Posted September 1, 2020 2 hours ago, Tony Wright said: Another loco I've made featuring cab doors and a fallplate................. The loco is built from a DJH kit and painted by Geoff Haynes. The gap 'twixt loco and tender is wider than wholly desirable, but these are very long locos and it's made to run on other systems as well as Little Bytham. Its construction featured in the RM to coincide with the York Show this year, where it would have run on Shap. Next year? One of the most beautiful locomotives ever built. 4 Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted September 1, 2020 RMweb Gold Share Posted September 1, 2020 1 hour ago, Clive Mortimore said: We're posh from Bedford. I was told once that there was a posh part of Bedford.........still looking for it..... 10 Link to post Share on other sites More sharing options...
Daniel W Posted September 1, 2020 Share Posted September 1, 2020 I've only just started my first loco kit and already had a disastor. I've always seen people fit axle bushes with the flange on the outside of the chassis when building kits, yet after soldering the bearings in to my Judith Edge North British shunter i realised that the etched axelbox overlays were designed to fit over the opposite side of the bush. Bit of a rookie mistake, since if i'd looked closer that would have been fairly obvious. Unless the etched axleboxes are desinged to be soldered on to the flanges of the bushes, but surely that would cause them to stick out far too much? 1 Link to post Share on other sites More sharing options...
Chuffer Davies Posted September 1, 2020 Share Posted September 1, 2020 8 minutes ago, Daniel W said: I've only just started my first loco kit and already had a disastor. I've always seen people fit axle bushes with the flange on the outside of the chassis when building kits, yet after soldering the bearings in to my Judith Edge North British shunter i realised that the etched axelbox overlays were designed to fit over the opposite side of the bush. Bit of a rookie mistake, since if i'd looked closer that would have been fairly obvious. Unless the etched axleboxes are desinged to be soldered on to the flanges of the bushes, but surely that would cause them to stick out far too much? Did you read the instructions? 2 Link to post Share on other sites More sharing options...
Daniel W Posted September 1, 2020 Share Posted September 1, 2020 13 minutes ago, Chuffer Davies said: Did you read the instructions? Yes. Numerous times. They made no mention of this particular topic. Merely to fit the bushes and then a few sentences later to fit the axleboxes. 5 Link to post Share on other sites More sharing options...
Chuffer Davies Posted September 1, 2020 Share Posted September 1, 2020 7 minutes ago, Daniel W said: Yes. Numerous times. They made no mention of this particular topic. Merely to fit the bushes and then a few sentences later to fit the axleboxes. In which case you have my sympathies. If I've made a similar mistake its usually because I haven't read the instructions. Even worse it is when I've written the instructions in the first place. Cheers, Frank 2 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now