gr.king Posted September 15, 2018 Share Posted September 15, 2018 B16s are cool, Yes, they are lovely, every bit as lovely as Robinson's L1s. I wouldn't dare to imply that criticisms of the usefulness, and especially the braking ability of the latter class, were wholly fabricated by those who didn't like their appearance or their lowly tank-engine status, but despite being only a numerically small class they all saw out at least three and a half decades of service at a time when the "impoverished" LNER was still finding scope to send some other, younger, numerically small classes of less widely criticised locos to the scrapyard. Link to post Share on other sites More sharing options...
Headstock Posted September 15, 2018 Share Posted September 15, 2018 Hey, what about Robert Urie's S15 class for the LSWR. Nothing poncy or frilly here (and two are preserved on the Mid Hants). Both the B16's and S15's were designed for fast freights, where the most important factor was stopping the train, and were also happy on medium paced passenger trains. Bill Just kidding, though now I come to mention it, I'm sure i've seen a paper doily laid out on the seat of an S15. Yes, they are lovely, every bit as lovely as Robinson's L1s. I wouldn't dare to imply that criticisms of the usefulness, and especially the braking ability of the latter class, were wholly fabricated by those who didn't like their appearance or their lowly tank-engine status, but despite being only a numerically small class they all saw out at least three and a half decades of service at a time when the "impoverished" LNER was still finding scope to send some other, younger, numerically small classes of less widely criticised locos to the scrapyard. How did you conclude it was an L1. L1s are cool. Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted September 15, 2018 RMweb Gold Share Posted September 15, 2018 Did someone mention Urie S15s? Al 11 Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted September 15, 2018 RMweb Gold Share Posted September 15, 2018 The packing slip for that S15 was dated 7/4/88, by the way. I acquired it second hand (only needing to add the motor/gearbox) and built it in 2015, a mere 27 years later. 1 Link to post Share on other sites More sharing options...
RMweb Gold Buhar Posted September 15, 2018 RMweb Gold Share Posted September 15, 2018 Yes, they are lovely, every bit as lovely as Robinson's L1s. I wouldn't dare to imply that criticisms of the usefulness, and especially the braking ability of the latter class, were wholly fabricated by those who didn't like their appearance or their lowly tank-engine status, but despite being only a numerically small class they all saw out at least three and a half decades of service at a time when the "impoverished" LNER was still finding scope to send some other, younger, numerically small classes of less widely criticised locos to the scrapyard. I understood that all tank engines of whichever company were frequently found wanting on goods workings because their braking ability was relative to the coal and water on board at the time. 2000 gallons of ex-water in a big pug is a lot of weight to lose, plus there were six tender wheels accompanied by brake shoes that were absent. Link to post Share on other sites More sharing options...
RMweb Gold Tony Wright Posted September 16, 2018 Author RMweb Gold Share Posted September 16, 2018 Did someone mention Urie S15s? Al Thanks for posting that, Al, Excellent work. Without checking up, is that one of the SR 4-6-0s now available RTR from Hornby? I know they did (do?) an Arthur. I assume the loco is a DJH kit? If there is an RTR equivalent, I imagine sales now of the DJH kit will be almost nil. Yet another kit being 'eroded' away. I've never built an S15, though I have built an Arthur (from a Crownline kit). Unfortunately, the front steps had to go to get round the layout curves of the guy who bought it. Did you have any problems with the steps on your curves? Regards, Tony. Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted September 16, 2018 RMweb Premium Share Posted September 16, 2018 Without checking up, is that one of the SR 4-6-0s now available RTR from Hornby? Yes it is Tony. If you would like one, we have one as a raffle prize (very generously donated by Hornby) at the BRMA Convention . 1 Link to post Share on other sites More sharing options...
Headstock Posted September 16, 2018 Share Posted September 16, 2018 I remember seeing a marvelous Southern layout many years ago, that had some fantastic 'local' 4-6-0 locomotives. A T14 paddlebox and a H15 amongst others, types that (along with a myriad of others) seem to have long since vanished from the exhibition circuit. Nice to see a kit built S15 though. Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted September 16, 2018 RMweb Gold Share Posted September 16, 2018 Here's another Southern 4-6-0, completely scratch built Arthur in 2mm (though not quite finished) from master loco builder John Greenwood. Jerry 19 Link to post Share on other sites More sharing options...
RMweb Gold Craigw Posted September 16, 2018 RMweb Gold Share Posted September 16, 2018 I have a conundrum to lob into debate which I hope some one might have some suggestions on. I have a Johnson 1f tank kit to build and I am keen to find a reason to be able to run it on Monsal Dale. The station itself is bracketed by Bakewell and Millers Dale (the one an important Market town - goods shed and sidings - and the other a large station and major junction facilitating the link to Buxton whilst also serving the limestone quarries, lime works, and local dairy & agricultural trade) I assume there were watering facilities at Millers Dale but perhaps not at Bakewell. Sheds were at Rowsley (7 miles) and Buxton (11 miles) either side of Monsal Dale. I assume that there will have been 1fs shunting the quarry and lime works sidings at Millers Dale - presumably shedded at Buxton. I have a photo of one shunting at Bakewell but have no idea if that was a regular occurrence. I have no idea of the range of a 1f ..... either in terms of coal or watering. Can anyone think of a believable scenario by which you might see a 1f pootling through Monsaldale and what it might be doing/pulling. Personally, I take the view that if you like it then build it. but - and this is the big bit, I would not do it until you have a good stock of the locos that you do "need" The time expended on the 1F would give you something that you really do need and in my view that should be the priority. Regards, Craig W Link to post Share on other sites More sharing options...
jrg1 Posted September 16, 2018 Share Posted September 16, 2018 Here's another Southern 4-6-0, completely scratch built Arthur in 2mm (though not quite finished) from master loco builder John Greenwood. Arthur 2.jpg Jerry Watchmaker's work-extraordinary! Link to post Share on other sites More sharing options...
RMweb Gold Tony Wright Posted September 16, 2018 Author RMweb Gold Share Posted September 16, 2018 Here's another Southern 4-6-0, completely scratch built Arthur in 2mm (though not quite finished) from master loco builder John Greenwood. Arthur 2.jpg Jerry Marvellous stuff! Is it really 'only' 2mm Scale? It looks much bigger. Link to post Share on other sites More sharing options...
Guest Posted September 16, 2018 Share Posted September 16, 2018 Here's another Southern 4-6-0, completely scratch built Arthur in 2mm (though not quite finished) from master loco builder John Greenwood. Arthur 2.jpg Jerry If I could build like that in 4mm or 7mm I’d be delighted. Lovely stuff. Link to post Share on other sites More sharing options...
robertcwp Posted September 16, 2018 Share Posted September 16, 2018 Yes it is Tony. If you would like one, we have one as a raffle prize (very generously donated by Hornby) at the BRMA Convention . I thought the Hornby S15 was the later Maunsell variant. Link to post Share on other sites More sharing options...
landscapes Posted September 16, 2018 Share Posted September 16, 2018 Here's another Southern 4-6-0, completely scratch built Arthur in 2mm (though not quite finished) from master loco builder John Greenwood. Arthur 2.jpg Jerry Hi Scratch built in 2mm scale, absolutely amazing,nothing short of a work of art. Regards David Link to post Share on other sites More sharing options...
RMweb Gold Tony Teague Posted September 16, 2018 RMweb Gold Share Posted September 16, 2018 These two S15's are both built from DJH kits (but not by me!): No.499 is the Urie version built an painted for me by Chris Phillips: No.847 is the Maunsell version which I acquired via Tony from the estate of a deceased modeller and so the builder is unknown: As has been said, Hornby have only produced the Maunsell version and there is no doubt that it has a level of detail that the kit-built examples do not achieve; nevertheless they are pretty good models with excellent haulage capability. I love the look of the S15's; here is the real thing on the Bluebell Railway (my image): [with apologies - not often I can post SR pictures on an LNER thread!] Tony 15 Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted September 16, 2018 RMweb Gold Share Posted September 16, 2018 Thanks for posting that, Al, Excellent work. Without checking up, is that one of the SR 4-6-0s now available RTR from Hornby? I know they did (do?) an Arthur. I assume the loco is a DJH kit? If there is an RTR equivalent, I imagine sales now of the DJH kit will be almost nil. Yet another kit being 'eroded' away. I've never built an S15, though I have built an Arthur (from a Crownline kit). Unfortunately, the front steps had to go to get round the layout curves of the guy who bought it. Did you have any problems with the steps on your curves? Regards, Tony. Thanks, Tony. You've seen this one in the flesh, fully painted, as it got a trot around Little Bytham in 2015. I tried searching for one of the images you took, but haven't yet been able to locate it. Hornby do the later straight-footplate S15 but they haven't yet done one of the Urie builds, although I imagine they might tackle it if sales of the first type were strong. They could even do one in LSWR goods green, if they changed the chimney. These must have had an impact on DJH as I see quite a few S15 kits turning up on ebay lately. I think the footsteps on an S15 must be more forgiving than an Arthur, as this one didn't present any difficulties. I do remember having a struggle getting my Hornby Arthurs to traverse all my curves with steps fitted. Al Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted September 16, 2018 RMweb Gold Share Posted September 16, 2018 Hi Scratch built in 2mm scale, absolutely amazing,nothing short of a work of art. Regards David i saw it at Rail Wells and was knocked out by what an amazing bit of modelling it was (although, looking from a distance, I wasn't immediately sure if it was an S15 or an Arthur). I can't get my around head how anyone can get valve gear to work in 2mm; it's challenging (and fiddly) enough for me at twice the size. Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted September 16, 2018 RMweb Premium Share Posted September 16, 2018 The Arthurs are really elegant loco's, however the driving wheels look just a tad too 'big'. The S15s are really elegant loco's, however the driving wheels look just a tad too 'small' Phil 2 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted September 16, 2018 RMweb Premium Share Posted September 16, 2018 I thought the Hornby S15 was the later Maunsell variant. Having read your and subsequent posts, I stand corrected. Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted September 16, 2018 RMweb Gold Share Posted September 16, 2018 The Arthurs are really elegant loco's, however the driving wheels look just a tad too 'big'. The S15s are really elegant loco's, however the driving wheels look just a tad too 'small' Phil Steady on, Goldilocks! Link to post Share on other sites More sharing options...
bbishop Posted September 16, 2018 Share Posted September 16, 2018 The Arthurs are really elegant loco's, however the driving wheels look just a tad too 'big'. The S15s are really elegant loco's, however the driving wheels look just a tad too 'small' Phil So you are a H15 fan. Bill Bill Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted September 16, 2018 RMweb Gold Share Posted September 16, 2018 (edited) The Arthurs are really elegant loco's, however the driving wheels look just a tad too 'big'. The S15s are really elegant loco's, however the driving wheels look just a tad too 'small' Phil And Gresley's Pacifics look just right Edited September 16, 2018 by Bucoops Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted September 16, 2018 RMweb Gold Share Posted September 16, 2018 Speaking of front footsteps, as Tony was, the needs of railway modellers couldn't have been uppermost in Maunsell's considerations when he designed the Schools. I've added front steps to this Schools but they're a definite compromise. As fitted, it'll just squeak around my outer curves but it's really on the limit. The steps aren't quite right, though, as the real things are set back in quite noticeably, with an angled top piece. I feel that the character of the loco is missing something without steps, though, so I'd rather have something rather than nothing. They could do with being a bit longer still, which I might do at some point. The length isn't really the problem, it's just that I underestimated the size a bit when making them. In the long run the loco could probably do with some clever side-play restriction or conversion to an effective 2-6-0, but I'll enjoy it as-is for the time being, even if it's on a restricted operation! Al 1 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted September 16, 2018 RMweb Premium Share Posted September 16, 2018 And Gresely's Pacifics look just right Probably because they are Pacifics? P 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now