RMweb Gold Downendian Posted July 14 Author RMweb Gold Share Posted July 14 Hmm I’ve converted it to mp4 so should work? I can see it on my iPad ok. 2nd version uploaded Neil Link to post Share on other sites More sharing options...
John Tomlinson Posted July 14 Share Posted July 14 25 minutes ago, Downendian said: Hmm I’ve converted it to mp4 so should work? I can see it on my iPad ok. 2nd version uploaded Neil Works on my Firefox now as well. Great video, many thanks! John. 1 Link to post Share on other sites More sharing options...
Phill Dyson (onslaught832) Posted July 14 Share Posted July 14 Great video Neil ......works fine for me too 🙂 1 Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted July 22 Author RMweb Gold Share Posted July 22 The anhydrous ammonia rake is still being worked on, the tanks taking a lot of work with 5-6 coats of white going on each. Filler and adhesive blemishes the main cause of this slow progress, but it’s getting there. The tanks will then be gloss varnished then decals, then I can put together the complete wagons. in the meantime between paint drying sessions, put together two diag 1/583 Mackerel ballast wagons obtained from scale model innovations (on eBay) as a 3D print. It will add a bit of variety to my catfish/dogfish/trout rakes. The 3D print is not the golden bullet it may first seem, a lot of time was spent removing the feeds from the model, and despite great care still managed to dislodge a footstep and two handrail supports on the end platforms. The brake shoes disintegrated on removing from the feed sprue, so I used some Parkside spares I had. The hopper and brake handwheels will probably be replaced with 51L (where’s my dishing jig got to!) brass equivalents (as on the catfish fleet), but overall a lovely little model of a prototype not ever likely to be seen RTR or kit form. They also produce Gannets and Herrings (the BR design not ex-GWR), so maybe these will be added at some point to my fleet. The Mackerel are not currently listed on eBay, but I guess direct contact with Scale Model Innovations via their Facebook page is the way to go. The .stl file is however freely downloadable if you have the luxury of your own 3D printer. I feel myself being drawn towards this area of modelling in the future. transfers applied one side this morning as were instanters , although still to add overhead wire flashes, 17.5T markings and data panel, then to weather and add ballast load to give more weight. The model is not as free running as I’d like, despite taking great care fitting waisted bearings- the width between the axle boxes could be 0.5mm larger may help. Only running will tell if this needs more attention. Photo shows the two Mackerel in question plus one of my Cambrian catfish for comparison. Neil 4 1 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted July 22 RMweb Premium Share Posted July 22 Got to be worth getting a printer, are these printed from the Iron Mink designs? I printed 34 of his mineral wagons for about £18 of resin. Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted July 22 Author RMweb Gold Share Posted July 22 Indeed Martin, Iron Mink on Thingiverse - amazing designs. I wouldn’t know where to start buying a 3D printer, for a start my laptop is past its sell by date and that will need replacing first! Neil Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted July 22 RMweb Premium Share Posted July 22 1 hour ago, Downendian said: Indeed Martin, Iron Mink on Thingiverse - amazing designs. I wouldn’t know where to start buying a 3D printer, for a start my laptop is past its sell by date and that will need replacing first! Neil chitubox on its own take up around 3GB and slows a PC right down. I have a Elegoo Mars 2 Pro, any of the similar range new ones should be fine. 1 Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted July 22 RMweb Gold Share Posted July 22 7 hours ago, Downendian said: The anhydrous ammonia rake is still being worked on, the tanks taking a lot of work with 5-6 coats of white going on each. Filler and adhesive blemishes the main cause of this slow progress, but it’s getting there. The tanks will then be gloss varnished then decals, then I can put together the complete wagons. in the meantime between paint drying sessions, put together two diag 1/583 Mackerel ballast wagons obtained from scale model innovations (on eBay) as a 3D print. It will add a bit of variety to my catfish/dogfish/trout rakes. The 3D print is not the golden bullet it may first seem, a lot of time was spent removing the feeds from the model, and despite great care still managed to dislodge a footstep and two handrail supports on the end platforms. The brake shoes disintegrated on removing from the feed sprue, so I used some Parkside spares I had. The hopper and brake handwheels will probably be replaced with 51L (where’s my dishing jig got to!) brass equivalents (as on the catfish fleet), but overall a lovely little model of a prototype not ever likely to be seen RTR or kit form. They also produce Gannets and Herrings (the BR design not ex-GWR), so maybe these will be added at some point to my fleet. The Mackerel are not currently listed on eBay, but I guess direct contact with Scale Model Innovations via their Facebook page is the way to go. The .stl file is however freely downloadable if you have the luxury of your own 3D printer. I feel myself being drawn towards this area of modelling in the future. transfers applied one side this morning as were instanters , although still to add overhead wire flashes, 17.5T markings and data panel, then to weather and add ballast load to give more weight. The model is not as free running as I’d like, despite taking great care fitting waisted bearings- the width between the axle boxes could be 0.5mm larger may help. Only running will tell if this needs more attention. Photo shows the two Mackerel in question plus one of my Cambrian catfish for comparison. Neil More cracking wagons Neil! Can’t wait to see a completed ammonia tank too.. Too many snags to fix here following Winchcombe but can start on them now family are back in Estonia and this weeks fishing is done… 😉 2 Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted July 25 Author RMweb Gold Share Posted July 25 Finishing touches on the pair of Mackerel ballast hoppers today. Final transfer application, weathering and ballast loads. Annoyingly one tiny 17T decal went adrift during the weathering, never to be seen again. I only had four on the transfer sheet so no spares grrr. Test running next phase, ballast still drying so a bit white in places. Neil 1 1 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted July 25 RMweb Premium Share Posted July 25 I don't think I have ever seen a Mackerel (wagon) Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted July 26 RMweb Gold Share Posted July 26 12 hours ago, Downendian said: 17T decal went adrift during the weathering, never to be seen again. Have you got the HMRS sheet for BR wagons? Mike. Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted July 26 Author RMweb Gold Share Posted July 26 Ah good point Mike - I have it somewhere! 1 Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted August 2 Author RMweb Gold Share Posted August 2 Progress report on the anhydrous ammonia tanks. All have now been painted, ivory white tanks, gunship green chassis and black bogies. Five have now been assembled with five to go. Tanks are attached to the chassis with super steel epoxy - brilliant stuff, my araldite days are over. Next to the long process of applying transfers and the tank supports. The yellow wrap around band I’m sure will be fiddly so patience needed I’m sure. Fisons tanks had a yellow warning band, later when ICI branded this was orange. Neil 3 Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted August 2 RMweb Gold Share Posted August 2 56 minutes ago, Downendian said: Progress report on the anhydrous ammonia tanks. All have now been painted, ivory white tanks, gunship green chassis and black bogies. Five have now been assembled with five to go. Tanks are attached to the chassis with super steel epoxy - brilliant stuff, my araldite days are over. Next to the long process of applying transfers and the tank supports. The yellow wrap around band I’m sure will be fiddly so patience needed I’m sure. Fisons tanks had a yellow warning band, later when ICI branded this was orange. Neil These are going to look jolly impressive Neil! Did you see the Facebook post I linked you to? Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted August 2 Author RMweb Gold Share Posted August 2 2 hours ago, Phil Bullock said: These are going to look jolly impressive Neil! Did you see the Facebook post I linked you to? Thanks Phil, no I didn’t see any Facebook tag Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted Wednesday at 10:17 Author RMweb Gold Share Posted Wednesday at 10:17 More progress on the anhydrous ammonia rake. All ten tanks have had their yellow warning stripes added - quite a fiddly job using fantasy workshop decals (golden yellow), cut carefully with a scalpel to 4mm strips. Still some tidying up to do on them, but fixed with decalfix overnight- they are very flimsy when first applied and handling often resulted in decal moving or sticking to hands. Orange strips were supplied with the kits - correct shade for later BR periods but these early Fisons Fertilizers branded tanks had yellow stripes. I think I’ve got the shade just about right. Unfortunately I committed the sin of not referring closely enough to prototype photos when positioning the yellow bands, 3 had to be redone. Only a few mm out, but when the Anhydrous Ammonia and Fisons Fertlizers decals are applied would stick out like a sore thumb. I’ve still to finish the artwork for the required transfers-and my retirement has meant that my mastery of Microsoft word and PowerPoint has nose dived, a learning curve restablished. Still to apply the brake/discharge wheels, screw couplings to a few, paint the under frames and buffer beams black, a few tarpaulin ties (to be painted yellow) have become detached and need attention, but project getting there. Will definitely need carefully varnishing to protect the decals. My sole SLW class 25/3 has just arrived, and I’m pondering a new identity. My ICRS shed 78 book has details of all 25s with snow plough brackets fitted, so 25 324 will inevitably change its identity- I don’t like to keep what everyone else has got but the snow ploughs look rather nice. Two Accurascale class 37s incoming too in the next week or so again will change their identities to carry TOPS numbers. Neil 5 1 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted Wednesday at 11:28 RMweb Gold Share Posted Wednesday at 11:28 1 hour ago, Downendian said: More progress on the anhydrous ammonia rake. All ten tanks have had their yellow warning stripes added - quite a fiddly job using fantasy workshop decals (golden yellow), cut carefully with a scalpel to 4mm strips. Still some tidying up to do on them, but fixed with decalfix overnight- they are very flimsy when first applied and handling often resulted in decal moving or sticking to hands. Orange strips were supplied with the kits - correct shade for later BR periods but these early Fisons Fertilizers branded tanks had yellow stripes. I think I’ve got the shade just about right. Unfortunately I committed the sin of not referring closely enough to prototype photos when positioning the yellow bands, 3 had to be redone. Only a few mm out, but when the Anhydrous Ammonia and Fisons Fertlizers decals are applied would stick out like a sore thumb. I’ve still to finish the artwork for the required transfers-and my retirement has meant that my mastery of Microsoft word and PowerPoint has nose dived, a learning curve restablished. Still to apply the brake/discharge wheels, screw couplings to a few, paint the under frames and buffer beams black, a few tarpaulin ties (to be painted yellow) have become detached and need attention, but project getting there. Will definitely need carefully varnishing to protect the decals. My sole SLW class 25/3 has just arrived, and I’m pondering a new identity. My ICRS shed 78 book has details of all 25s with snow plough brackets fitted, so 25 324 will inevitably change its identity- I don’t like to keep what everyone else has got but the snow ploughs look rather nice. Two Accurascale class 37s incoming too in the next week or so again will change their identities to carry TOPS numbers. Neil Hmmm, interestingly a member of the Accurascale staff has liked this, get your poker cards out!! Mike. 1 Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted Wednesday at 11:44 Author RMweb Gold Share Posted Wednesday at 11:44 Lightning can’t strike twice Mike surely! I guess it’s because I mentioned their 37s which have just now been dispatched. Not that I wouldn’t like to see Accurascale do some chemical tankers - they are few and far between both RTR and kit form, Avonmouth received a lot of this traffic. 1 Link to post Share on other sites More sharing options...
RMweb Gold young37215 Posted Thursday at 06:14 RMweb Gold Share Posted Thursday at 06:14 On 28/05/2024 at 16:10, Downendian said: Quick video of recent running session with the Stone 21T hopper rake. Sound chip switched off! IMG_2337 2.mp4 10.8 MB · 6 downloads I am interested in the signalmans platform to the bottom left of the picture, can you please advise who makes this? Link to post Share on other sites More sharing options...
RMweb Gold Downendian Posted Thursday at 06:56 Author RMweb Gold Share Posted Thursday at 06:56 40 minutes ago, young37215 said: I am interested in the signalmans platform to the bottom left of the picture, can you please advise who makes this? It’s a scale model scenery item https://www.scalemodelscenery.co.uk/lx148-oo-relay-boxtrackside-platforms-mixed-pack-oo4mm176-1579-p.asp Neil 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now