locomad Posted February 1, 2018 Share Posted February 1, 2018 Probably all the lead in the paint! Could quite well be, ive kept all my paints in an old cigar box for over 50 years, the old humbrel paints seem to last for ever, the paint pigment settles on the bottom and a lovely smelling thinner on top, some paints like silver or gun metal one just has to dip a screwdriver in and use whats on that. Years ago i was told to turn them upside down, some i did but they went off, just shake the tin and hear a soild lump inside. shame the glue didn,t last Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted February 1, 2018 RMweb Premium Share Posted February 1, 2018 I have three of these. Cambridge custom transfers do a lovely set of transfers for these. Baz Link to post Share on other sites More sharing options...
Mr_Tilt Posted February 1, 2018 Share Posted February 1, 2018 I have three of these. Cambridge custom transfers do a lovely set of transfers for these. Baz Do they now? Do you have a link for them please, I'd quite like to update my now vintage builds? 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted February 1, 2018 RMweb Premium Share Posted February 1, 2018 Do they now? Do you have a link for them please, I'd quite like to update my now vintage builds? https://www.cctrans.org.uk/products.htm Product code BL20. Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted February 1, 2018 RMweb Premium Share Posted February 1, 2018 Do they now? Do you have a link for them please, I'd quite like to update my now vintage builds? I do indeed. Sheet BL20 at https://www.cctrans.org.uk/products.htm . Regards, John Isherwood, Cambridge Custom Transfers. 2 Link to post Share on other sites More sharing options...
xm607 Posted February 1, 2018 Share Posted February 1, 2018 Here is a train of fifteen Scalecraft Roadrailers on my EM Gauge Trafalgar Yard layout, since sold on due to lack of space. The train includes the open trailer bringing up the rear, this Roadrailer train has done a couple of circuits on Roy Jackson's Retford which caused some amazement and incredibility that they stayed on the track and together. Steve. 14 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted February 1, 2018 RMweb Premium Share Posted February 1, 2018 Nice train - I too have the open Roadrailer, which always seemed to be at the end of the rake and carried, I understand, the compressor used to operate the changeover mechanism from road to rail use. Regards, John Isherwood. PS for ...incredibility..., read ...incredulity... . Sorry, I'm in Mr. Picky mode !! Link to post Share on other sites More sharing options...
Mr_Tilt Posted February 1, 2018 Share Posted February 1, 2018 (edited) Excellent, thanks for the link to CCT. LOVE that looooong Roadrailer train, it really brings back memories. I don't recall the flat wagon carrying a compressor, and I never saw it on the track, but then I was only on that job for a very short time and we always used a shop air line with a VERY long hose. Edited February 1, 2018 by Mr_Tilt 1 Link to post Share on other sites More sharing options...
jrg1 Posted February 1, 2018 Share Posted February 1, 2018 I understand that the raising/lowering mechanism was designed to be operated by the lorry compressor. Very impressed with the long RR train. I am not surprised that they performed well on Retford-the vehicles conformed to 3-point suspension, and should run just as well on P4 track, with no springing or compensation. 1 Link to post Share on other sites More sharing options...
locomad Posted April 5, 2018 Share Posted April 5, 2018 Made one recently this time I read the instructions and found to my surprise you don't need to use glue on rear doors they clip fit in so one can open and close them Made one recently this time I read the instructions and found to my surprise you don't need to use glue on rear doors they clip fit in so one can open and close them 2 Link to post Share on other sites More sharing options...
73c Posted April 5, 2018 Share Posted April 5, 2018 Made one recently this time I read the instructions and found to my surprise you don't need to use glue on rear doors they clip fit in so one can open and close them Made one recently this time I read the instructions and found to my surprise you don't need to use glue on rear doors they clip fit in so one can open and close them That surprised, wrote it twice, one for each door! Link to post Share on other sites More sharing options...
locomad Posted April 7, 2018 Share Posted April 7, 2018 That surprised, wrote it twice, one for each door! Surprised me as well sometime my so called smart phone is doing writing everything twice including texts, cause I am last to know until recipient tells us I am been rude or over stating a message. Still it's a lovely kit to make, everything seemed to fit together shame they are so rare and expensive, I've a few pre made one's mostly badly made I've collected from toy fairs some will be rebuilt others use a static model 1 Link to post Share on other sites More sharing options...
rowehillmaster Posted August 27, 2018 Share Posted August 27, 2018 (edited) Hello, I am new here - I want to model from scratch, first in CAD and then via 3D Print using the CAD model, some of these PSC Roadrailers, (once built it would easily convert to other liveried versions or the earlier US C&O version) - I just need a few overall dimensions and details like wheel sizes etc. Here is a Crane I have just done for someone to model in 1/35 scale -: .... can anyone help, or point me in the right direction please ? Thanks Andy Edited August 27, 2018 by rowehillmaster Link to post Share on other sites More sharing options...
RMweb Premium PhilJ W Posted August 27, 2018 RMweb Premium Share Posted August 27, 2018 Hello, I am new here - I want to model from scratch, first in CAD and then via 3D Print using the CAD model, some of these PSC Roadrailers, (once built it would easily convert to other liveried versions or the earlier US C&O version) - I just need a few overall dimensions and details like wheel sizes etc. Here is a Crane I have just done for someone to model in 1/35 scale -: .... can anyone help, or point me in the right direction please ? Thanks Andy ???? are you sure your posting on the right thread? Link to post Share on other sites More sharing options...
RMweb Premium Nile Posted August 27, 2018 RMweb Premium Share Posted August 27, 2018 Hi Andy, those are very impressive CAD models. I think you're after information about the American Roadrailers. The early ones were similar in operation to the British ones being discussed here, but later ones varied quite a bit. The rail wheels were removed from the trailers and they used separate rail bogies instead when running on rails. Can't help you with any specific details as I don't have any, maybe better to ask in the USA section of RMweb. http://www.rmweb.co.uk/community/index.php?/forum/155-usa-canadian-railroads/ 1 Link to post Share on other sites More sharing options...
rowehillmaster Posted August 27, 2018 Share Posted August 27, 2018 (edited) ???? are you sure your posting on the right thread? Yes - it is the 1960 PSC Roadrailer that I want to model, as trialed in the UK (what the Scalecraft model is based upon) it was originally a Roadrailer built for the C&O in the 1950s by Comeng Edited August 27, 2018 by rowehillmaster 1 Link to post Share on other sites More sharing options...
RMweb Premium Nile Posted August 27, 2018 RMweb Premium Share Posted August 27, 2018 In that case you are in the right place. The Scalecraft kit was based on the prototypes rather than the production models. Link to post Share on other sites More sharing options...
Mr_Tilt Posted August 27, 2018 Share Posted August 27, 2018 I scaled up the dimensions of my built up production RoadRailers and the basic stuff is below:- Length along the body shell : 24 ft 8 ins Width across the body shell at the cantrail : 8 ft 3ins (the body shell is 3 ins narrower Height of the bodyshell from the bottom of the underframe to the peak of the roof : 8 ft 11 ins Height of the bodyshell from the sills to the peak of the roof : 8 ft 6 ins Height of the bodyshell from the sills to the cantrails ; 7 ft 3 ins Road wheel dia across tyres : 3 ft Road wheel dia : 1 ft 6 ins Rail wheel dia : 2 ft 4 ins Bogie wheelbase : 4 ft 1 ins Hope that's enough to get you going anyway. 1 Link to post Share on other sites More sharing options...
jrg1 Posted August 27, 2018 Share Posted August 27, 2018 Yes - it is the 1960 PSC Roadrailer that I want to model, as trialed in the UK (what the Scalecraft model is based upon) it was originally a Roadrailer built for the C&O in the 1950s by Comeng Let us all know if you intend to produce models for sale-a rake of these would be ideal for my project. 1 Link to post Share on other sites More sharing options...
rowehillmaster Posted August 28, 2018 Share Posted August 28, 2018 Hope that's enough to get you going anyway. .... Thanks, that is just the starter I need to work up a scaling scheme to use as I create the CAD model - it ties in with the one dimension I have of an overall length quoted in a book about Comeng, obviously gauge width is another know dimension ! Link to post Share on other sites More sharing options...
rowehillmaster Posted August 28, 2018 Share Posted August 28, 2018 .... here is a picture from the Comeng book showing a 'Typical British block train of Roadrailer vans' - I have not seen this picture anywhere else ? 11 Link to post Share on other sites More sharing options...
BrushType4 Posted August 28, 2018 Share Posted August 28, 2018 I'd be interested in a 7mm version or two. 1 Link to post Share on other sites More sharing options...
rowehillmaster Posted August 28, 2018 Share Posted August 28, 2018 I'd be interested in a 7mm version or two. .... the CAD model will scale for 3D Printing well, with a little adjustment for level of detail etc. for the smaller scales Andy 3 Link to post Share on other sites More sharing options...
Porcy Mane Posted August 28, 2018 Share Posted August 28, 2018 I'm not sure if these links have been posted before but just for completeness some links to pics of two different types of the 1959 C&O original roadrailers or to give them their official C&O name, "Combination Highway-Rail Trailers". https://flic.kr/p/pGU7RE http://rrpicturearchives.net/showPicture.aspx?id=1281031 P Link to post Share on other sites More sharing options...
Mr_Tilt Posted August 28, 2018 Share Posted August 28, 2018 I'm not sure if these links have been posted before but just for completeness some links to pics of two different types of the 1959 C&O original roadrailers or to give them their official C&O name, "Combination Highway-Rail Trailers". http://rrpicturearchives.net/showPicture.aspx?id=1281031 That second one looks very like the PSF prototypes, albeit a tad longer. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now