F-UnitMad Posted November 17, 2011 Share Posted November 17, 2011 Okay, another dumbo question from yours truly... Β I have a Kato Wisconsin Central loco which was given to me sans handrails... I fitted a set that were yellow plastic, but sprayed them with primer first, then used enamel (actually Precision EWS Red) to get them to match the body... these (both enamel & primer) have started to flake off especially where I might have caught & flexed the handrails. As I have other Kato locos in the paintshop, with handrails again needing to be painted, how do I stop this flaking from happening? Put another way -how do I get the paint to stick?!? Any/all advice gratefully received..... Link to post Share on other sites More sharing options...
M Graff Posted November 17, 2011 Share Posted November 17, 2011 The "best" way is actually to use paint for Lexan R/C bodys! I use Pactra brand myself, and it sticks like nothing else. And as it is made for flexing; no flaking! Try it, you might like it. Link to post Share on other sites More sharing options...
warbonnetuk Posted November 17, 2011 Share Posted November 17, 2011 The other stuff to try is the new 'Micro Prep' product that Microscale have recently launched. The blurb accompanying the launch made great play on how it allows delrin / "engineeering plastics" to be glued / painted. Β I got some from Model Junction but haven't had call to use it yet Β Dan Spalding Link to post Share on other sites More sharing options...
Jez Posted November 17, 2011 Share Posted November 17, 2011 Hi Jordan, Β I have read that the handrails could also be sand/shot/grit blasted using baking powder in one of the small grit blasting guns available throughout ebay. I've got one, but have not had chance to try it out. They seem to be quite cheap, but you will probably need a compressor to power it. The advantage of grit blasting is you don't have too many layers of undercoat/paint making the already overscale handrails even more overscale. Β Jez Link to post Share on other sites More sharing options...
modelmaker87 Posted November 17, 2011 Share Posted November 17, 2011 The "best" way is actually to use paint for Lexan R/C bodys! I use Pactra brand myself, and it sticks like nothing else. And as it is made for flexing; no flaking! Try it, you might like it. Β Β Graff is dead on with this piece of advice. I use Pactra also and it is the very best handrail paint available. Β Cheers, Tony Link to post Share on other sites More sharing options...
Jon Gwinnett Posted November 17, 2011 Share Posted November 17, 2011 The "best" way is actually to use paint for Lexan R/C bodys! I use Pactra brand myself, and it sticks like nothing else. And as it is made for flexing; no flaking! Try it, you might like it. Β If you're struggling to find Pactra in the UK (and I guess the RC shops might sell it) Tamiya do a spray designed for their polycarbonate RC shells which is reputed to work, although i haven't tried it myself. Link to post Share on other sites More sharing options...
F-UnitMad Posted November 17, 2011 Author Share Posted November 17, 2011 Β If you're struggling to find Pactra in the UK ..... Yeah, I was wondering about that, when I Googled Pactra and Testor's website came up. ... the best products are usually from the US, but it can be very difficult to get them over here, especially solvent-based paints..... Link to post Share on other sites More sharing options...
warbonnetuk Posted November 17, 2011 Share Posted November 17, 2011 The couple of jars that I have I got from modelshop that also did R/C cars / planes etc Β Going a quick google on "R/C Cars" I got this Β http://www.modelsport.co.uk/?CategoryID=9950&SubCategoryID=995025&PageNo=3 Β Hope this helps Β Dan Spalding Link to post Share on other sites More sharing options...
F-UnitMad Posted November 18, 2011 Author Share Posted November 18, 2011 Thanks for the link Dan! Not sure what colour in the Motorsport world would match Wisconsin Central maroon... but as the other locos that I will need to paint the handrails use Tamiya Blue, then the best bet for them would most likely be the Tamiya Polycarbonate paint, which should match exactly... Link to post Share on other sites More sharing options...
RMweb Premium cnw6847 Posted November 18, 2011 RMweb Premium Share Posted November 18, 2011 i've read about soaking the handrails in white vinegar, haven't tried it though. Link to post Share on other sites More sharing options...
CraigZ Posted November 19, 2011 Share Posted November 19, 2011 Tamiya also makes paint for R/C polycarbonate bodies that sticks well. Β One thing I haven't seen mentioned is a product that I buy over here in an auto parts store called Adhesion Promoter. Comes in a rattle can and is used to prep flexible auto bumpers. It will improve paint sticking pretty dramatically but give the handrail enough bend and the paint will flake. I need to get a grit blaster and try that... Link to post Share on other sites More sharing options...
F-UnitMad Posted December 12, 2011 Author Share Posted December 12, 2011 I have bought some "Micro Prep", and will try it out soon.... Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.