RMweb Gold roundhouse Posted September 15, 2014 Author RMweb Gold Share Posted September 15, 2014 When I am ready to start planning i will do a new thread. Β A leasrt I know where to find the info provided in the meantime. Β Horseehoe would be nice but it wouldnt fit in the space that Santa Barbara occupies between the fiddleyard boards. Β Not only would I need a bigger car but also a bigger house!! Β Ian 1 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted September 15, 2014 Author RMweb Gold Share Posted September 15, 2014 Actually, Kalmbach's 'Classic Railroads You Can Model' book has the Horseshoe Curve as a suggested layout... http://www.amazon.com/Classic-Railroads-You-Can-Model/dp/0890246149 Β How about the Rockville Bridge - Viewing area is the bridge (from either side?) including theΒ curves and crossovers at both endsΒ with 4 fiddle yards (SE=Harrisville/Philadelphia line, SW=Enola, NE=Buffalo line, NW=Pittsburgh line). Yes, I'm being silly. Β Adrian A bridge would be nice!! Link to post Share on other sites More sharing options...
Andy Reichert Posted September 15, 2014 Share Posted September 15, 2014 (edited) How about one of the bridges that are on the coast as an option module extension for longer show locations? Β For those that don't know, San Luis has its own less well known "horseshoe" AND it's on the same line as SB. And the "Classic" lovely windy hillside track with many short tunnels at the top of the gradeΒ Yet another great extension module possibility. Β http://www.youtube.com/watch?v=1oDnmiDsU1I Β and Β http://www.youtube.com/watch?v=8joaICqizzo Β Andy Edited September 15, 2014 by Andy Reichert Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted September 15, 2014 Author RMweb Gold Share Posted September 15, 2014 San Luis Obispo is a good possibility to replace Santa Barbara in five or so years time. The grade out of SlO heading North past the penitentiary would be great but again space is the problem. Also with fewer of us to do shows it would just take too long to set up and take down. Β Β However Santa Barbara still has quite a few invites in the next few years to keep us busy. Link to post Share on other sites More sharing options...
Adrian Wintle Posted September 15, 2014 Share Posted September 15, 2014 A bridge would be nice!! Β This is the Rockville bridge: Β https://www.google.ca/maps/@40.3315599,-76.9095142,2536m/data=!3m1!1e3 Β Adrian 2 Link to post Share on other sites More sharing options...
Adrian Wintle Posted September 16, 2014 Share Posted September 16, 2014 Adrian Β Thanks Β Looks like i will be buying some BLMA details and spending a bit of time on some of them then!! Β If you can find a copy, Diesel Era V8N4 (Jul/Aug 1997) has an 8-page article on the first batch of NS C40-9Ws, with walkaround photos (except, annoyingly, a rear shot) and drawings. As a bonus, there is also a 5-page article on the then-new Amtrack P42s. Β Adrian Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted September 16, 2014 Author RMweb Gold Share Posted September 16, 2014 (edited) Thanks Adrian. Β WIll have to go through my Diesel Era's and see if I have it. Β Ian Edited September 16, 2014 by roundhouse Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted September 17, 2014 Author RMweb Gold Share Posted September 17, 2014 A package from Shapeways arrived today with some new goodies. Β On item is this baggage cart. Similar to the one found at airports carting people around this is a baggage only type which I seen in use at Santa Barbara to move checked baggage from the station to the baggage car at the front of the train on the Coast Starlight. I will have to look through my photos as I can't remember what colour it should be but IIRC it should be white or orange. This 3D print consists of three parts so once cleaned it was assembled in minutes before getting a coat of primer. Β Other items include templates for signage on the road surfaces, one being for RR X. Been after these since building the layout! 2 Link to post Share on other sites More sharing options...
Andy Reichert Posted October 12, 2014 Share Posted October 12, 2014 Just found my shot of the morning Surfliner Amtrak service heading North to San Luis Obispo at a murky Gaviota taken in 2010. The plan is to model this train on Santa Barbara. Β The Horzion cars are in hand and the cab car is the next item to do possibley modified from an old Life Like F40. Β Sad, but so, so avoidable.Β Todays' news. Β http://www.ksby.com/news/one-dead-two-injured-when-hit-by-amtrak-train/ Β Andy Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 12, 2014 Author RMweb Gold Share Posted October 12, 2014 Why do people put them selves in such dangerous positions. Β It's just makes taking photos from safe places harder as we all get tarred with the same brush Link to post Share on other sites More sharing options...
Adrian Wintle Posted October 14, 2014 Share Posted October 14, 2014 Ian; do you run any TrinCool 64' Reefers? http://www.spookshow.net/freight/blmareefer.html http://www.spookshow.net/freight/exreefer.html Β I just picked up a couple of BLMA ones on the weekend to go with the Exactrail ones that I have (all in UP livery). I found it very interesting that the plastic box and insert appeared to be identical between the two, but the cars themselves were completely different. The Exactrail ones are a bit finer, but there is nothing much in them and they look fine together. The new BLMA ones have the newer Carrier a/c units that have been recently retrofitted (Spookshow's picture shows the old reefer unit, which is the same as the Exactrail cars). The Exactrail cars seem to run a bit better, but I haven't gotten around to fettling the BLMA ones and I did have to do a bit of work on the Exactrail ones, so I don't think there is much in it there either. Β They definitely aren't cheap cars (either in cost or execution), but they are impressively large. Β Adrian Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 14, 2014 Author RMweb Gold Share Posted October 14, 2014 I have a couple but can't remember which make. The etched end panels have tenancy to fill off despite remixing with Superglue so they fo need careful handling at shows Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 15, 2014 Author RMweb Gold Share Posted October 15, 2014 (edited) Work on this tiny luggage cart is well underway. The one that I photographed at Santa Barbara has a roof so I am considering how best to add this. Probably some bras wire for the uprights and a styrene roof. I think that I have some Preiser luggage to put on it.Should be ready for his weekends show at Uckfield. Edited October 15, 2014 by roundhouse 3 Link to post Share on other sites More sharing options...
long island jack Posted October 15, 2014 Share Posted October 15, 2014 Probably some bras wire for the uprights and a styrene roof. Β Β use the 36B type wire gives plenty of support!!!!!!!!!! Β Ray Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 15, 2014 Author RMweb Gold Share Posted October 15, 2014 Surfs up!! 5 Link to post Share on other sites More sharing options...
Adrian Wintle Posted October 15, 2014 Share Posted October 15, 2014 What model is the camper van? I have a number of different interpretations of the basic VW van, but not a camper. Β Adrian Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 16, 2014 Author RMweb Gold Share Posted October 16, 2014 Adrian Here is the box the VW came in. I bought it off Plus Daughters who do various shows in the UK Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 16, 2014 Author RMweb Gold Share Posted October 16, 2014 And now there is a third brewery again just off scene from the area modelled. Β Figueroa Mountain Brewing Co http://goo.gl/maps/527Jl Β Must go back and do some more research!!! 1 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 17, 2014 Author RMweb Gold Share Posted October 17, 2014 (edited) Last night I fixed the SEEP solenoids which failed last weekend. One of the coil wires had come away from the PCB so was a very easy fix under the magnifier after unplugging the solenoid from the layout. Β Both the luggage cart and the camper are just about finished although Instill need to fit the fin to the surfboard. Β These will be glued into place on the layout once set up tomorrow morning at the Uckfield show. Edited October 17, 2014 by roundhouse 4 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 18, 2014 Author RMweb Gold Share Posted October 18, 2014 (edited) We had a good day at Uckfield. A few Rogue freight cars but generally things ran well. Β I have been playing with the Sony wifi lens again. Considering this is N gauge it performing fairly well when using it at Street level where most cameras would struggle to get much more depth of field. I must try taking the same shots at various focal points then try stacking them. Edited October 18, 2014 by roundhouse 10 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 20, 2014 Author RMweb Gold Share Posted October 20, 2014 We had a good weekend at the Uckfield show and a chat with quite a few Rmwebbers. Another well organised show and a good lunch. Β Layout ran well generally although a few freight cars did play up but soon fixed. Β We were planning on running the 5BEL ' World Tour - California section' with a UP loco on the head end yesterday but it just wouldn't run properly. Turned out to be a broken wire to one of the powered bogies (now fixed at home) so thats for another day Β We did have a slight mishap setting up but luckily most of the damage was fixed so not noticeable except to me. We were still finding bits as we packed up last night so a little work required before the layouts next outing which will be Newcastle in November. 1 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 22, 2014 Author RMweb Gold Share Posted October 22, 2014 Last night I decided to have a good look at the double stack container cars to see if I could spot why they kept derailing despite being 15 years old and running fine until recent shows. Β One had an axle popped out of its bearings but that might have happened after being packed away as I am sure we would have spotted that! Β A number had a build up of dirt despite only recently being cleaned. Most of these cars have had Gold Medal etched walkways added but they tend to be prone to coming loose so this tiem I fixed them back down with canopy glue rather than superglue so we will see how well these last before requiring repair. Β A little more fetling carried to such as adding more weight will hopefully help them run better at Newcastle. 3 Link to post Share on other sites More sharing options...
Jon Gwinnett Posted October 22, 2014 Share Posted October 22, 2014 Hadn't realised you were coming to Newcastle Ian. Will have to try and get down to it now, can't miss the chance to see this, and shoot the breeze about So-Cal modelling, European distractions and UK modern N! The only difference is that you produce superb layouts for all your different interests, whilst I just procrastinate 1 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted October 22, 2014 Author RMweb Gold Share Posted October 22, 2014 (edited) Thanks Jon. Look forward to seeing you. Β had a lull in modelling for a while but with show season now here, there are deadlines to meet!! Β Ian Edited October 22, 2014 by roundhouse 2 Link to post Share on other sites More sharing options...
298 Posted October 22, 2014 Share Posted October 22, 2014 Hadn't realised you were coming to Newcastle Ian. Will have to try and get down to it now, can't miss the chance to see this, and shoot the breeze about So-Cal modelling, European distractions and UK modern N! The only difference is that you produce superb layouts for all your different interests, whilst I just procrastinate Which is ultimately why it is good to see such layouts. Unfortunatel, most punters only seem to be interested in dreary 1950s steam layouts, and having to even walk past a "foreign" layout is considered an abomination.... Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now