RMweb Premium Claude_Dreyfus Posted October 21, 2013 RMweb Premium Share Posted October 21, 2013 Would love to see ABM Railcraft do the reverse image for the North Cornwall stone station. He quite happily did a reverse of the LBSCR 'Country House' kit for me. Only thing to be aware of...everything is reserved; including those instructions on the sheets - and not all are as simple as 'glue here'! 1 Link to post Share on other sites More sharing options...
autocoach Posted October 22, 2013 Share Posted October 22, 2013 Would love to see ABM Railcraft do the reverse image for the North Cornwall stone station. (or does Kernow have a real surprise for us in the future?) Meantime I am watching this line to see what they do next and if I can use it. I have to think of my proposed Penge East station model too. And I need an ESPEE Class 18 Standard depot too.....for Walnut Creek...(Southern is part of the name) Quoting myself...hmmm Actually left a note on their website. Will wait a while to see if they respond before direct e-mail request for quote. I keep hoping Kernow/Bachmann come to my rescue before the glue gets too old on my current paper version. When demolition was threatened for the Padstow station building, I had hoped it might stir up more active preservation. Link to post Share on other sites More sharing options...
tender Posted October 29, 2013 Share Posted October 29, 2013 Hi Ken, Phoned ABM Rail-craft today and a reversed LSWR station in stone should be on its way to me soon. 1 Link to post Share on other sites More sharing options...
autocoach Posted October 30, 2013 Share Posted October 30, 2013 (edited) Hi Ken, Phoned ABM Rail-craft today and a reversed LSWR station in stone should be on its way to me soon. Thanks for taking the initiative Sent off an e-mail just now requesting the reverse image (or correct image?) of the stone LSWR station. I have been meaning to replace my earlier effort that was slapped together out of cardboard, plastic sheet (plasticard in UK) and various bits. I used a Design Preservation store front for the doors to platform from the waiting room. I will also now need to rebuild the canopy to a better standard. Maybe even reduce the size of the wartime lockup to the right of the baggage door. I think I built it a little too large as I had no measurements available. Grandt Line curved O scale (1:48) windows worked well but are a little undersize. I have also been saving a package of conically capped Grandt Line HO smoke stacks for the vents over the men's facilities that are very visible in 1940's-50's photos. I will have to get back to finishing the station master's (probably his wife's) garden from a Busch allotment kit. Now if ABM would do the signal box I can declare the Bude box (stairs in right location but built from brick and too tall) and the Wadebridge box which is too tall and has stairs on the wrong side surplus. I will also have to get on with the fish sheds, freight crane, long wharf tracks and so much other stuff. And they do PayPal which is so much more convenient for those of us residing on distant shores. Phoning from the west coast of the US is a bother due to time zones etc. so I hope we can do this by e-mail. Edited October 30, 2013 by autocoach Link to post Share on other sites More sharing options...
tender Posted November 4, 2013 Share Posted November 4, 2013 This arrived today. As you can see, the image has been reversed (as have the printed instructions) so is now a good representation for Padstow. Something to keep me busy now the nights are drawing in. I need to clear my workbench of other projects before making a start on this. Ray. 1 Link to post Share on other sites More sharing options...
autocoach Posted November 5, 2013 Share Posted November 5, 2013 Looking forward to my order for the same arriving in the very near future. Having already built the Padstow station once, I am interested in how this will differ. I can see some differences around the mens lavatory in the photo from Padstow where the Padstow differed from other North Cornwall stations. I was not expecting an exact Padstow match so am not disappointed. I guess we will have to supply our own chimney pots. Easily done. Link to post Share on other sites More sharing options...
RMweb Premium ianmaccormac Posted November 6, 2013 RMweb Premium Share Posted November 6, 2013 Bachmann LB&SCR E4 Has there been any news at all about the E4? I haven't seen any mention of it since the initial launch blurb. Has anyone any further info? It was down for release this year but I am presuming that may be unlikely now? Cheers Ian Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted November 7, 2013 RMweb Gold Share Posted November 7, 2013 Ian Bachmann only announced the E4 in March this year as part part of their usual practice of announcing models to be released over an 18 month period, So as far as I was aware it was never down for release this year, and is likely to be the end of next year. 1 Link to post Share on other sites More sharing options...
RMweb Gold Budgie Posted November 7, 2013 RMweb Gold Share Posted November 7, 2013 Is there any chance that Bachmann might release a buffet car to go with their 4CEP? Otherwise I am going to have to use their loco-hauled RMB car, which is the wrong outline. Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted December 16, 2013 RMweb Gold Share Posted December 16, 2013 Hornby have announced today their 2014 range which includes a brand new Drummond 700 0-6-0 and also 2-Hal EMU. A round up of all the Southern / Southern Region content can be found on my blog at http://grahammuz.com/2013/12/16/Hornby-2014-announcement-from-an-srbrs-perspective-includes-drummond-700-class-and-2-hal-emu/ Compliments of the season to you all! 1 Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted March 15, 2014 RMweb Gold Share Posted March 15, 2014 Just a quick update to advise of a few BR(s) related items now arriving at Stockists: - the A and B versions of the Hornby R4534 ex Maunsell Pull-Push coach packs - the R4536B Hornby Bogie Passenger Brake B Coach (Van B) number S217S in BR (SR) Green livery. - the updated Class 33/0 from Heljan. Further details can be read on my blog here Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted March 15, 2014 RMweb Gold Share Posted March 15, 2014 Gaugemaster had the push Pull sets and the Heljan 33/0s in stock today but I forgot about the brake B. Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted May 9, 2014 RMweb Gold Share Posted May 9, 2014 00 Works have announced their intention to produce a Ready to Run ex LBSC Marsh I3 class locomotive. The discussion thread here on RMweb is here. Further details can be found on my own blog here and the 00 Works website here 1 Link to post Share on other sites More sharing options...
burgundy Posted May 9, 2014 Author Share Posted May 9, 2014 ... and some more for the Brighton minded. Furness Railway Wagon Company - Goods Vehicles 7mm scaleThe Furness Railway Wagon Company has a range of pre-grouping goods vehicles which include three that are of Brighton interest. The 5 plank Open A is priced at £50 and consists of a brass chassis and resin top with brass and white metal fittings. The three plank is priced at £45 with a similar form of construction and the 7 plank is £50, has a resin top with brass and white metal fittings and builds the "side door only" version. A six plank wagon is a further possibility if sales of the initial releases are encouraging.The existing range already includes a third class passenger coach to a Joseph Wright design that closely resembles some Craven period vehicles from the Brighton. e mail - furnessrailway@hotmail.com Parliamentary Trains 7mm scaleFor those interested in the very early period, Parliamentary Trains are producing a series of kits for LNWR locos and rolling stock. One of the forthcoming releases is a Bury loco which appears to be very similar to those supplied to the Brighton in the earliest days. e mail - stephen@parlytrains.co.uk 5 & 9 Models – 4mm rolling stockChris Cox has produced some new kits for the LCDR high round end and low round end open wagons and two P.O. Wagons, supplied with etched w irons at £11-00 a kit. The PO vehicles are based on Rickett Smith and Lamont & Warne wagons but are generic and would suit other prototypes with a bit of imagination.http://www.5and9models.co.uk/index.html EBM Models – 4mm scale (and 3.5mm scale!)New items include- Victoria double-sided (and very uncomfortable-looking) platform seat, as in the left foreground of the photo of G single "Stephenson" (Haresnape p17) £6- nickel silver ladders for EBM signals - including tall ones. These are in the form of a very long 'H' with three cross bars that act as spacers. You bend the sides up to form the ladder's uprights, and thread wire through the holes for the rungs which are soldered in place. The tops include the bent over arms that attach to the posts. £4 per ladder- fret of nickel-silver coupling hooks £5- "slimline multibox" - a cross between the Branchlines 2 stage slimline gearbox and their Multibox. This is small enough to fit in most of my kits. Branchlines supply the gears, or direct from Letchworth Gear Services at about £14. Just quote the Branchlines slimline box. Three ratios available. Fret £5- if anyone knows of any rare beasts called HO Brighton modellers, Mike is currently scaling down the C class with outside frame tender for someone - so that will be available.Please note that the rise in metal costs has finally hit home and prices will have to rise - the first general one ever.the website will be updated in due course.E mail - mike@mjwsjw.co.uk Worsley Works – 4mm scale carriagesNew push-pull stock that will be available from Worsley Works.1921 Driving Trailer/Brake 3rd 8 compartment Diag 1871921 Trailer Composite (4 x 1st, 5 x 3rd) Diag 119 (Together formed SR sets 981-4 later 714-7)1906 Balloon trailer 60 seater Diag 180 – sides only, to be used as a conversion set for the Roxey Diag 181 kit.In hand1922 Drving Trailer/Brake 3rd 6 compartment Diag 1881922 Trailer Composite (2x 1st, 7 x 3rd) Diag 120(Together formed SR sets 985-990 later 718-723)To follow1912 Driving Trailer/Brake 3rd 8 compartmentDiag 183(formed into sets in 1922 with the 1922 Trailer composites to form SR sets 991-4 later 724-7)http://www.worsleyworks.co.uk/4mm/4mm_Southern_Pregroup_LBSCR.htm ABM Railcraft - 4mm scale buildingsFor the Brighton, ABM Railcraft have introduced a pitched roof canopy in 4mm (P2117) to complement the station building kit. This features the usual pierced bracketry and profiled valancing. Work on the LBSCR goods shed was unfortunately delayed - as Al was somewhat overwhelmed by the demand for the LSWR kits and production to meet that demand had to take priority - but he hopes finally to introduce a goods shed based on Bramley and Wonersh during the summer.ABM is also progressively reworking and reintroducing models in 2mm - where possible, windows will be transparent rather than printed and he is examining ways of making a suitably robust canopy for this scale.Web site www.abmrailcraft.weebly.com Etched Pixels – 2mm scale rolling stockAlan now has available polished 3D printed body shells and compartments with etched sideoverlays, trusses and other detailing for the LBSCR Balloon Third (dia 185) and LBSCR Balloon Brake Third (dia 190).It will be possible to turn out the 3D printed parts for all the other Balloon stock, so the range is likely to be extended over time. Arc roof bogie stock is in preparation using the same system, probably for late this year.sales@etchedpixels.co.uk Best wishes Eric 2 Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted June 6, 2014 RMweb Premium Share Posted June 6, 2014 (edited) Some wagon body mouldings/kits for the LSWR devotee in 2mm, 4mm, 7mm and Gauge 1 I've recently discovered the delights of GRA Models and it's ever helpful proprietor, Graham Baker. I have just placed an order for some resin wagon bodies with Graham and will come back with my thoughts once received. Details as follows: Graham Baker 18 Lower TailCarpenders ParkWatfordHertfordshireWD19 5DD E-mail:alygra@btinternet.com Tel: 07833 364274 (Monday – Friday 09:00-17:00 GMT only) Web: www.gramodels.co.uk 2mm: WN01 12/15 ton 8 plank openWN02 12/15 ton 8 plank openWN03 12/15 ton 8 plank sheetedWN04 12/15 ton 8 plank sheetedWN05 Ventilated Meat VanWN06 Insulated Goods VanWN07 As 03 open with sheet railWN08 As 04 open with sheet railWN09 As 01 Steel end postsWN10 As 02 Steel end postsWN11 RectankWN12 Cattle truckWN13 War FlatWN14 RUDDWN15 Ventilated Butter VanWN16 Machinery Well WagonWN17 Ramp wagon 4mm: 00401 War Flat00401a Buffer beam (With jack)00401b As 401a no jacks00401c As 401a no jacks type 200401d Buffers (None working)00402 LSWR Lowmac00403 LSWR 8 plank open (4 types)00404 LSWR As 403 (Sheeted )00405 LSWR Sleeper wagon00406 LSWR 1 plank open00407 LSWR 1 plank open (steel)00408 LSWR 3 plank open00409 LSWR 3 plank open (steel)00410 Rectank00411 Ramp wagon00412 Diamond frame bogies00413 Plate bogies00414 Covered Goods Sr. Dia.1410 00415 As above open one side00416 Gunpowder van Sr. Dia. 1701 7mm: 0701 War flat. 19190701a Buffer beams (Jacked)0701b As 701a no jacks0701c As 701a no jacks type07mm02 Rectank07mm03 Ramp wagon07mm04 Diamond Frame Bogies Gauge 1: 3201 LSWR 5 plank open3202 Rectank3203 War flat3204 Diamond frame bogies The catalogue (including a vast array of military vehicles in many scales) is available via a link on the GRA Models website. Please be aware that due to an increase in the cost of raw materials Graham has had to increase the price, so those quoted will no longer be correct. I have no connection with this business other than being a customer (so usual disclaimers apply!) and will report back once I have the mouldings. Cheers Tim Edited July 4, 2014 by Tim Dubya 1 Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted July 1, 2014 RMweb Premium Share Posted July 1, 2014 (edited) Sorry for the delay... long story short, new camera was required. Again, sorry about the quality of the following images, once I get to grips with the new camera (and Photoshop CC) I'll repost them. The mouldings are exactly as they arrived from Graham, so will need cleaning up, I've left them in their natural state so you can see what you get. They all compare extremely well (if not exactly) to the published drawings from An Illustrated History of Southern Wagons Vol. 1. I will need to compile a shopping list and once I have all the bits, I intend to show the build in the Kitbuilding & Scratchbuilding part of the forum (don't hold your breath!). Dia 1410 Covered Goods Dia 1301 3 Plank - Steel Underframe Dia 1673 Lowmac Dia 1785 Sleeper Wagon You will probabaly see what look like holes right through the castings in places. These are just air bubbles trapped in the resin and should disappear with painting. As I said above, hopefully I'll be able to post better images in due course. All the best Tim Edited August 3, 2014 by Tim Dubya Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted November 24, 2014 RMweb Gold Share Posted November 24, 2014 My take on the SR / BR(s) relevant announcements at this years Warley show can be found on my blog here Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted November 28, 2014 RMweb Gold Share Posted November 28, 2014 My blog post linked to above has been updated to include the latest information from Bachmann regarding their yet to be released SR PLV/PMV Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted December 16, 2014 RMweb Gold Share Posted December 16, 2014 Hornby announce their full 2015 range plans at midday tomorrow (17/12) and whilst there will be a full post by Andy on here at time, I will also be posting a comprehensive round up, with some exclusive information, of the SR and BR(S) related products at the same time on my blog at http://www.grahammuz.com Link to post Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted December 16, 2014 RMweb Premium Share Posted December 16, 2014 Graham, have you mentioned that Slaters have now added a 6 compartment brake third kit to their 7mm range? The kit ref is 7C027E (with etched brass bogies) or 7C027P (with plastic bogies). This kit now makes it possible to easily produce the common 2 Set-P (BCK BTK) formation - a boost for West of England modellers! Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted December 17, 2014 RMweb Gold Share Posted December 17, 2014 Hornby announce their full 2015 range plans at midday tomorrow (17/12) and whilst there will be a full post by Andy on here at time, I will also be posting a comprehensive round up, with some exclusive information, of the SR and BR(S) related products at the same time on my blog at http://www.grahammuz.com My post is now live and the direct link is http://grahammuz.com/2014/12/17/Hornby-2015-range-announcement-from-an-srbrs-perspective-sees-an-s15-and-adams-radial/ Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted December 17, 2014 RMweb Gold Share Posted December 17, 2014 Graham, have you mentioned that Slaters have now added a 6 compartment brake third kit to their 7mm range? The kit ref is 7C027E (with etched brass bogies) or 7C027P (with plastic bogies). This kit now makes it possible to easily produce the common 2 Set-P (BCK BTK) formation - a boost for West of England modellers! Hi Chris Thanks I had not picked up on that before which is good news as I don't think it was possible to make a totally authentic set from their previous releases? Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted February 15, 2015 RMweb Gold Share Posted February 15, 2015 (edited) Please see my post with pictures here http://grahammuz.com/2015/02/15/Bachmann-ex-lbsc-e4-0-6-2t-on-the-way/ with respect to the very imminent arrival of the Bachmann E4 Tank locomotive. This release is also being discussed here on RMweb on this thread here http://www.rmweb.co.uk/community/index.php?/topic/81251-Bachmann-e4/ Edited February 24, 2015 by Graham_Muz 2 Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted February 24, 2015 RMweb Gold Share Posted February 24, 2015 00 Works have announced their intention to produce a Ready to Run ex LBSC Marsh I3 class locomotive. The discussion thread here on RMweb is here. Further details can be found on my own blog here and the 00 Works website here A quick review and pictures can be read here http://grahammuz.com/2015/02/24/first-ex-lbsc-march-i3-4-4-2ts-arrive-from-00-works/ 1 Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted March 2, 2015 RMweb Gold Share Posted March 2, 2015 (edited) A summary of today's Bachmann and Graham Farish 2015/16 announcements from a Southern perspective can be read here http://grahammuz.com/2015/03/02/bachamn-201516-range-announcements-include-class-450-emu-and-45t-ransomes-and-rapier-steam-crane/ Edited March 2, 2015 by Graham_Muz Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now