RMweb Gold Kaput Posted January 30, 2022 RMweb Gold Share Posted January 30, 2022 4 hours ago, Graham108 said: So in this instance 'headcode panel' & 'tail lights' are the same thing? Does anybody know if using DCC enables setting the lights to red? As I said, they physically don't have any red lights fitted for DCC to do anything with. 1 1 Link to post Share on other sites More sharing options...
47606odin Posted February 1, 2022 Share Posted February 1, 2022 The lower lights not used since year dot were marker lights, as on a shunt loco, which could be switched red or white using a red filter. Not sure if they were used as tail lights before it became acceptable to use red blinds Link to post Share on other sites More sharing options...
47606odin Posted February 1, 2022 Share Posted February 1, 2022 The new Heljan artwork has been shown for the new 33/1, but for some unknown reason they’ve all got snowploughs on, which weren’t fitted to 33/1’s until I think Swordfish got them with Fragonset Link to post Share on other sites More sharing options...
SRman Posted February 1, 2022 Share Posted February 1, 2022 On 30/01/2022 at 08:24, Kaput said: Unless they changed it in the last batch none of Heljan's 33's actually have red lights fitted. I am about to experiment with wiring a bicoloured red/white LED into each end of a 33/1 I use for push-pull work with Kernow's 4TC units. I bought some common cathode versions for this purpose, and also some suitable resistors, so it is a matter of working out the connections and keeping it all from shorting out on the metal chassis block. For best effect, I will probably have to change the blinds to double white blanks. I'll post the results in my layout topic when I get around to doing this. If it is successful, I'll repeat the procedure on all of the 33/1s I own, but I can't see any point in doing it to the 33/0 or 33/2 variants as they usually have trains behind their trailing cabs. Link to post Share on other sites More sharing options...
RMweb Gold Roy Langridge Posted February 3, 2022 RMweb Gold Share Posted February 3, 2022 (edited) On 01/02/2022 at 11:33, SRman said: I am about to experiment with wiring a bicoloured red/white LED into each end of a 33/1 I use for push-pull work with Kernow's 4TC units. I bought some common cathode versions for this purpose, and also some suitable resistors, so it is a matter of working out the connections and keeping it all from shorting out on the metal chassis block. For best effect, I will probably have to change the blinds to double white blanks. I'll post the results in my layout topic when I get around to doing this. If it is successful, I'll repeat the procedure on all of the 33/1s I own, but I can't see any point in doing it to the 33/0 or 33/2 variants as they usually have trains behind their trailing cabs. I have done it on 2 or 3 of my 33s - works very well, including double white blank blinds. Edit - I wired all the way to the back of the LED and then coated the whole of the rear in silicon gel - then slots into the original hole where the candescent bulb was. Never had any shorts. Roy Edited February 3, 2022 by Roy Langridge 1 1 Link to post Share on other sites More sharing options...
The Black Hat Posted February 3, 2022 Share Posted February 3, 2022 Anyone got pictures of the new class 33 - was looking at 33021 Eastleigh in Fragonset black as the numbers on the engine look to be blurred in photos. Link to post Share on other sites More sharing options...
SRman Posted February 4, 2022 Share Posted February 4, 2022 11 hours ago, Roy Langridge said: I have done it on 2 or 3 of my 33s - works very well, including double white blank blinds. Edit - I wired all the way to the back of the LED and then coated the whole of the rear in silicon gel - then slots into the original hole where the candescent bulb was. Never had any shorts. Roy The silicon gel is a great idea. I never thought of that. 1 Link to post Share on other sites More sharing options...
paul 27 Posted August 20, 2023 Share Posted August 20, 2023 On 21/03/2014 at 17:32, BR(S) said: I seem to remember this was debated a few years ago and in relation to Class 26s and 27s as well. As you say, the marker lights were just marker lights and weren't used that often anyway. The "tail light" was just a red blind: http://farm8.staticflickr.com/7011/6448973117_74c1ab7967_z.jpg Stopped In Its Tracks - 33 017 by Sir Hectimere, on Flickr No marker lights in use: http://farm8.staticflickr.com/7156/6521993841_5e81cfd515_z.jpg The Woking Stop - 33 004 by Sir Hectimere, on Flickr And while we're talking about 33s, here's an interesting picture of a blue one in 1967: http://www.flickr.com/photos/fungus-mcbogle/6635761771/ Refering to the top picture with the red blinds, i purchased a s/h model some time ago all over green where some one had fitted these at one end, not good when running in reverse yet the photo shows the red blinds with the loco facing forward unless this is a top and tail. Link to post Share on other sites More sharing options...
bigherb Posted August 20, 2023 Share Posted August 20, 2023 2 hours ago, paul 27 said: Refering to the top picture with the red blinds, i purchased a s/h model some time ago all over green where some one had fitted these at one end, not good when running in reverse yet the photo shows the red blinds with the loco facing forward unless this is a top and tail. As the next movement will back the way it came, I expect the driver has changed the blind before changing ends. Link to post Share on other sites More sharing options...
RMweb Gold ruggedpeak Posted October 22, 2023 RMweb Gold Share Posted October 22, 2023 Could someone advise if these 33's come with etched plates please? Just got 33114 and no plates, want to check if they are missing or not supplied. Can't see any reference to etched plates on the website product descriptions. Ta. Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted October 22, 2023 RMweb Gold Share Posted October 22, 2023 2 minutes ago, ruggedpeak said: Could someone advise if these 33's come with etched plates please? Just got 33114 and no plates, want to check if they are missing or not supplied. Can't see any reference to etched plates on the website product descriptions. Ta. I’m not used to seeing etched plates with Heljan locos. 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now