RMweb Premium martin_wynne Posted September 14 RMweb Premium Share Posted September 14 1 hour ago, hayfield said: Martin Yes its the latest version you listed yesterday Will be interesting to see what it looks like with some paint I used some glue supplied with the machine. stuck well The noise is not too bad but sometimes my machine squeaks a bit only when the head accelerates quickly, machine not program ? Filing jig working well, but I think would have to be printed one half at a time on the angle to fit the Kingroon, needs a clamp as an end stop. As expected in 7mm scale there is a lot more filing than 4mm, but it was far more easier than any other system I have used in the past and probably far better How about slowing down a bit I can't keep up 😄 Hi John, Well done - looking good. 🙂 I don't understand about the clamp end stop? The tip of the blade should be 20mm from the end of the jig. Mark that position on the blade before removing it from the back filing jig, and position it 20mm again from the end in the front filing jig. The instructions for using the jigs are at: https://85a.uk/templot/club/index.php?threads/728 cheers, Martin. Link to post Share on other sites More sharing options...
hayfield Posted September 14 Author Share Posted September 14 I remembered about 4mm needing a gap. I can trim it back by 10mm My 10" file moves the rail forward despite how tight the nuts are, a simple fix to stop rail creep, perhaps the gap is a tad too deep. I will use your new settings on the next one One of my new SD cards is not working, it was a freebie with the printer, thankfully there were 2 supplied, plus as a stopgap I have other cards with my other machines (strange as the computer reads both, but not the Neptune. Link to post Share on other sites More sharing options...
hayfield Posted September 16 Author Share Posted September 16 £ pieces of the 7mm 32mm gauge B7 turnout roughly laid on the workbench Saying I am very pleased is an understatement The switch section, yesterday was a pain, some how the printer does not like the USB and SD cards which came with the machine and now the sandisk USB has to be repaired each time its used in the printer. I have emailed Elegoo and awaiting a reply Standard 1-7 vee filing jig 1 1 Link to post Share on other sites More sharing options...
Wayne Kinney Posted September 17 Share Posted September 17 (edited) On 31/08/2024 at 09:27, hayfield said: 2.25m of rail @ £3.75 pm £8.40 Hi John, is this a pricing mistake on the C&L website? Edited September 17 by Wayne Kinney Link to post Share on other sites More sharing options...
hayfield Posted September 18 Author Share Posted September 18 16 hours ago, Wayne Kinney said: Hi John, is this a pricing mistake on the C&L website? Not surprising, I will have a word with Phil at the weekend (if I get the time) as I am on the Templot display stand 1 Link to post Share on other sites More sharing options...
hayfield Posted September 19 Author Share Posted September 19 Templot will be at Scaleforun on Saturday and Sunday. I will be assisting James (Bexhill West) Walters on the stand hopefully demonstrating all aspects of Templot including the exciting plug track project, come and see us, Mark 2 of the COT track experiment with 1 piece wing rails The easy to use switch rail (back) jig being printed Come and say hello 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now