nigelwright7557 Posted July 27 Share Posted July 27 I have a dcc controller I designed myself. Works with Hornby and Bachmann decoders fine. However wont work with ESU lok pilot dcc 21 pin decoder. It will run loco speed and direction and turn lights on/off. But you access cv's, any attempt to do this is ignored by the decoder. So cant change loco number or change loco cv's. I have a Hornby select which will change cv's on the loco no problem. So the Hornby select is doing something my controller doesnt. Any clue as to why this is happening would be appreciated. Link to post Share on other sites More sharing options...
smokebox Posted July 27 Share Posted July 27 Programming output is too low maybe. The Select doesn't have a low power programming output, effectively programming "on the main" Link to post Share on other sites More sharing options...
nigelwright7557 Posted August 1 Author Share Posted August 1 On 27/07/2024 at 13:38, smokebox said: Programming output is too low maybe. The Select doesn't have a low power programming output, effectively programming "on the main" Turned out to be a bug in my dcc controller. It was sending 0,0,0,0 instead of 0,0,0 and so decoder was not entering service mode. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now