ejstubbs Posted July 19 Share Posted July 19 10 hours ago, ColinK said: I’ve done 2,500 miles on mine with only one problem - a rear wheel puncture. Getting the rear wheel off to replace the inner tube was so difficult I had to take it back to their workshop. Does your bike have the motor mounted within the rear wheel? I opted for a mid-drive motor when I bought my eMTB. That layout has benefits in terms of weight distribution and bike handling (though rear wheel mounted motors are still preferable to front wheel mounted in that respect), but also because everything about the bike apart from the motor and chainwheel is basically the same as an ordinary bicycle, so maintenance and repair tasks are the same. I've replaced the chain & rear cassette when they became worn beyond their service limits, replaced the crank arms when I managed to strip the thread on the self-extracting bolt on the drive side (my error), and upgraded the front & rear hydraulic disc brakes, and all using the same tools and techniques as on my non-e bikes. (I once found myself with a similar problem to yours when I got a rear wheel puncture and discovered that I'd left the 'key' for my locking QR axle at home. Fortunately I had my puncture repair patches with me and I was able to get the tyre off the rim with the wheel still in place, and get the tube out far out enough to locate the puncture and fix it. Since then I've always carried repair patches, as well as a spare tube, just in case I manage to do something stupid like that again...) 1 Link to post Share on other sites More sharing options...
stewartingram Posted July 19 Share Posted July 19 -`-+ Link to post Share on other sites More sharing options...
stewartingram Posted July 19 Share Posted July 19 Don't know if we've had this one on here previously, but it is an e-bike - honestly! Link to post Share on other sites More sharing options...
RMweb Premium JZ Posted July 19 Author RMweb Premium Share Posted July 19 56 minutes ago, stewartingram said: Don't know if we've had this one on here previously, but it is an e-bike - honestly! Good sized battery. Link to post Share on other sites More sharing options...
RMweb Premium melmerby Posted July 19 RMweb Premium Share Posted July 19 (edited) 7 hours ago, jjb1970 said: I think in fairness that delivery riders are a law unto themselves whether on an e-bike or a regular push bike. They were all using moped type motorcycles with "L" plates until these e bikes appeared and the changeover was fairly rapid, maybe 2 or three months from all mopeds to all e-bikes. This is in the centre of Birmingham, the suburbs will probably take a lot longer as the competition for business amomgst riders is less cut-throat. Edited July 19 by melmerby Link to post Share on other sites More sharing options...
RMweb Premium ColinK Posted July 19 RMweb Premium Share Posted July 19 6 hours ago, ejstubbs said: Does your bike have the motor mounted within the rear wheel? I opted for a mid-drive motor when I bought my eMTB. That layout has benefits in terms of weight distribution and bike handling (though rear wheel mounted motors are still preferable to front wheel mounted in that respect), but also because everything about the bike apart from the motor and chainwheel is basically the same as an ordinary bicycle, so maintenance and repair tasks are the same. I've replaced the chain & rear cassette when they became worn beyond their service limits, replaced the crank arms when I managed to strip the thread on the self-extracting bolt on the drive side (my error), and upgraded the front & rear hydraulic disc brakes, and all using the same tools and techniques as on my non-e bikes. (I once found myself with a similar problem to yours when I got a rear wheel puncture and discovered that I'd left the 'key' for my locking QR axle at home. Fortunately I had my puncture repair patches with me and I was able to get the tyre off the rim with the wheel still in place, and get the tube out far out enough to locate the puncture and fix it. Since then I've always carried repair patches, as well as a spare tube, just in case I manage to do something stupid like that again...) My e-bike has a Bosch motor in the centre round the pedals. The problems getting the back wheel off are removing the chain case, disconnecting the brakes, then almost impossible while on the road - there are torque sensors which have to be removed before you can get the rear wheel out. These have to be removed and fitted in certain ways which I struggled to understand even at home watching how to do it on Youtube. If you can get the tyre off the rim, find the puncture and put a patch over it, you can probably fix it on the road. The puncture had a unexpected ending. I pushed the bike heading towards a bus stop, hoping to get it home on the bus (as I work for the bus company I expected the driver would let me and bike on). However, as I reached the road one of our coaches appeared driven by the boss. He pulled up, I put the bike in the underfloor lockers. He was driving a new schoolbus route, so I was able to learn the new route. Link to post Share on other sites More sharing options...
Butler Henderson Posted July 19 Share Posted July 19 19 minutes ago, ColinK said: My e-bike has a Bosch motor in the centre round the pedals. The problems getting the back wheel off are removing the chain case, disconnecting the brakes, then almost impossible while on the road - there are torque sensors which have to be removed before you can get the rear wheel out. That sounds horribly complicated for a mid drive - my on Giant ebike the only issue, like any bike, is releasing the chain from the cassette. Mid drives are more stable as the weight of the motor is where the heaviest thing on the bike would be anyway - you, and are typically quoted as being better at climbing. That was proven to me as I followed a rear wheel drive which was fine on the relative level but shot past as soon as the road went upwards without me particularly increasing the use of the motor more than I would normally do. Link to post Share on other sites More sharing options...
Michael Hodgson Posted July 19 Share Posted July 19 On 12/07/2024 at 16:36, Cwmtwrch said: If it is a motor vehicle, and you don't register it, tax it, and have the necessary licence and insurance you can't legally use it except on private land with permission. If you do you can use it anywhere you can use any motor vehicle, as far as I know, which does not include a cycle path. Even on a motorway, or in places like the Tyne/Mersey Tunnels? Link to post Share on other sites More sharing options...
RMweb Gold big jim Posted July 19 RMweb Gold Share Posted July 19 17 minutes ago, Michael Hodgson said: places like the Mersey Tunnels? I’ve cycled through the Mersey tunnel! admittedly it was closed for a cycle event but at least I can say I’ve done it, it’s good run riding down to the bottom then there’s the sudden realisation you’ve got the climb back out again, not so bad when you first go though at the start of the ride, less fun coming back after 52 miles around the Wirral! 4 1 1 Link to post Share on other sites More sharing options...
RMweb Premium JZ Posted August 4 Author RMweb Premium Share Posted August 4 Picked up the bike the other day. Due to the weather and cricket, not done more than a couple of shakedown runs. Yesterday's was a bit longer, about 3 miles. Surprised how much of a boost you get, even in step one, not needed 2 or 3 yet. Yesterday's run was marred by an accident. My granddaughter, on her first run on my daughter's old bike, managed to run into the back of me and fall off. She suffered a few grazes to her arm and ankle, but the brave little soldier that she is, after a few tears, got herself up and pressed on. 2 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now