BusDriverMan Posted July 3 Share Posted July 3 Wondered if anyone has tried making their own airbrush cleaner solution? I saw this video: https://youtu.be/vwOAHRtp7RE?si=3O12Gn3esRx0zQRR He makes a cleaner to this recipe: - 3 parts distilled water - 3 parts household multipurpose cleaner or glass cleaner - 2 parts isopropyl alcohol - 1 drop glycerin per 50ml of solution I've just started airbrushing. Didn't occur to me that when you rinse the paint cup with thinners and dislodge the drying paint clots on the side of the cup, you should tip the thinners and detritus out, not spray it through the nozzle... I've got a hopefully temporarily clogged airbrush at the moment. Future process will involve a quick squirt of airbrush cleaner (DIY or from a can) after flushing with thinners when changing paint! 1 Link to post Share on other sites More sharing options...
RMweb Premium fulton Posted July 3 RMweb Premium Share Posted July 3 (edited) Do not know if this recipe works, but I do know the liquid airbrush cleaner I use, lots to chose from, does work and does not damage the seals etc. I first clean with water, if acrylic paint, then finish off with the cleaner, seems to last along time, I am sure your clogged airbrush will come back to life with a careful clean, if new to airbrushing it is all about practice, good luck and enjoy. Edited July 3 by fulton correction 2 Link to post Share on other sites More sharing options...
RMweb Gold Gilbert Posted July 3 RMweb Gold Share Posted July 3 36 minutes ago, BusDriverMan said: . I've got a hopefully temporarily clogged airbrush at the moment. Future process will involve a quick squirt of airbrush cleaner (DIY or from a can) after flushing with thinners when changing paint! This is often a good back stop... https://www.ebay.co.uk/itm/395097351304?var=0&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338268676&toolid=10044&customid=Cj0KCQjw7ZO0BhDYARIsAFttkCjJ7qJMnwJLnjKXKLvcnHjDxiqrKhmNaaQLj9mW14hPwDTaFzims8YaAjYGEALw_wcB 1 Link to post Share on other sites More sharing options...
RMweb Premium ColinK Posted July 3 RMweb Premium Share Posted July 3 I agree with Gilbert, Liquid Reamer works well. Smells a bit and probably not good for you, so I use it in my spray booth. Also useful is a ultrasonic bath, I dismantle the airbrush completely, put water plus a few drops of airbrush cleaner in the ultrasonic bath and switch it on for a few minutes. I do this at the end of every spraying session. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold 57xx Posted July 28 RMweb Gold Share Posted July 28 (edited) On 03/07/2024 at 10:24, BusDriverMan said: Wondered if anyone has tried making their own airbrush cleaner solution? For enamel, no, I just use turps or white spirits. For acrylics I have tried various recipes from online, they all pretty much do the trick, but nothing beats a proper strip down after a spraying session. After stripping some paint of a van roof, I think one of the key parts is the IPA, everything else is extra fluff. The glycerin is supposed to be to "lube" the needle. Edited July 28 by 57xx Link to post Share on other sites More sharing options...
RMweb Gold 57xx Posted July 28 RMweb Gold Share Posted July 28 On 03/07/2024 at 22:20, ColinK said: I agree with Gilbert, Liquid Reamer works well. Smells a bit and probably not good for you, so I use it in my spray booth. That will be the Xylene and acetone. 1 Link to post Share on other sites More sharing options...
RMweb Gold Gilbert Posted July 28 RMweb Gold Share Posted July 28 51 minutes ago, 57xx said: That will be the Xylene and acetone. and as suggested by ColinK.....best treated with respect. In fact, I do a lot of airbrush cleaning in the booth so I can switch it on if necessary. Chris H 2 Link to post Share on other sites More sharing options...
RMweb Premium Izzy Posted July 28 RMweb Premium Share Posted July 28 I only use enamels as I can’t get on with acrylics, and only use turps/white spirit for cleaning. What I have found useful is an iwata cleaning jar. This constrains all the spraying when cleaning with little or no smell. The other thing I do is always to withdraw and clean the needle after use and then set it back so it’s not sitting tight up against the nozzle. This stops it sticking/jamming in the nozzle. I then of course re-set it before use the next time. Bob 4 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted July 28 RMweb Premium Share Posted July 28 1 hour ago, Izzy said: I only use enamels as I can’t get on with acrylics, and only use turps/white spirit for cleaning. What I have found useful is an iwata cleaning jar. This constrains all the spraying when cleaning with little or no smell. The other thing I do is always to withdraw and clean the needle after use and then set it back so it’s not sitting tight up against the nozzle. This stops it sticking/jamming in the nozzle. I then of course re-set it before use the next time. Bob I don't find white spirit anywhere near 'active' enough for airbrush cleaning - I use xylene. It can be ordered online at a very reasonable price - just protect your hands and have plenty of ventilation when using it. CJI. 1 Link to post Share on other sites More sharing options...
RMweb Gold 57xx Posted July 28 RMweb Gold Share Posted July 28 6 hours ago, Gilbert said: and as suggested by ColinK.....best treated with respect. In fact, I do a lot of airbrush cleaning in the booth so I can switch it on if necessary. Chris H Indeed, which is why I called them out by name. Link to post Share on other sites More sharing options...
RMweb Premium Izzy Posted July 28 RMweb Premium Share Posted July 28 3 hours ago, cctransuk said: I don't find white spirit anywhere near 'active' enough for airbrush cleaning - I use xylene. It can be ordered online at a very reasonable price - just protect your hands and have plenty of ventilation when using it. CJI. I hope you will please forgive me but having spent my early working life inside lead lined walls using very noxious chemicals to process special X-ray film I have no desire to use such stuff as xylene even in the low level quantities it is probably sold to for the general public. That is why I stick to white spirit. I know no chemical is totally safe but I try and keep the risk as low as possible. Bob Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted July 28 RMweb Premium Share Posted July 28 36 minutes ago, Izzy said: I hope you will please forgive me but having spent my early working life inside lead lined walls using very noxious chemicals to process special X-ray film I have no desire to use such stuff as xylene even in the low level quantities it is probably sold to for the general public. That is why I stick to white spirit. I know no chemical is totally safe but I try and keep the risk as low as possible. Bob I have been using xylene for years, bought in large plastic containers from ebay. As well as being a useful solvent for paint, it is good as an adhesive solvent for polystyrene. As I mentioned, protection from dehydration for the skin, and plenty of fresh air / extractor to reduce / dilute fumes are sensible precautions. Having survived for three quarters of a century so far, I must be doing something right! CJI. Link to post Share on other sites More sharing options...
Barclay Posted July 31 Share Posted July 31 I almost always use enamels and give it a thorough blast with white spirit then a final blow through with cellulose thinner. Link to post Share on other sites More sharing options...
RMweb Premium Steadfast Posted July 31 RMweb Premium Share Posted July 31 On 28/07/2024 at 12:35, Izzy said: The other thing I do is always to withdraw and clean the needle after use and then set it back so it’s not sitting tight up against the nozzle. This stops it sticking/jamming in the nozzle. I then of course re-set it before use the next time. What a handy tip I'll have to remember. Thanks Bob. Jo Link to post Share on other sites More sharing options...
RMweb Premium peterm1 Posted September 3 RMweb Premium Share Posted September 3 I'm still a novice with the air brush but always strip it down to thoroughly clean it using turps. 1 Link to post Share on other sites More sharing options...
Chris56057 Posted September 6 Share Posted September 6 (edited) I'll flush the airbrush through after every spraying session, but don't tend to disassemble it all the time - I think this can have more of a negative effect over the long term. Of course, it's important to clean the needle, nozzle, colour cup etc. Edited September 6 by Chris56057 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now