RMweb Premium great northern Posted April 21, 2020 Author RMweb Premium Share Posted April 21, 2020 Afternoon tea, following a walk on a footpath, where three times I was nearly hit by speeding cyclists. Social distancing, and the fact it isn't a cycle path don't seem to matter to them. Rant over, and here's an image. My heart sank when I looked at it, for once again we have a problem, bent rather than missing this time. I have by the way since found the loco and put it straight. Clearly, I don't notice these things at the time, and I will always go for overall impression, rather than fine detail. These things "should" be right, but I have learned from my mindfulness course that "should" and "ought" are not words which necessarily rule one's life. Does it ruin the photo for you? If so. I shall be more careful in future, provided I can find the bits which have fallen off. Just another Ivatt waiting to go back to the M&GN, but I liked the way the coaches of the departing train to the right framed the picture. 18 1 Link to post Share on other sites More sharing options...
BurscoughCurves Posted April 21, 2020 Share Posted April 21, 2020 5 hours ago, great northern said: Anyway, with our cup of tea this morning we shall view some more experiments, as we watch the B1 on its way from angles we have rarely, if ever, seen before. The severity of the curve is a problem again, of course, and if I'm going to persist with the last two I will need to extend the ballasting, but what do you think, is it worth doing at all? The first one I do like, and I shall carry on using that angle occasionally. I love the first image Gilbert. I like sneaking images through buildings! Rather Colin Gifford like! For each a glimpse... All the best, Pete 3 2 1 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted April 21, 2020 RMweb Premium Share Posted April 21, 2020 12 minutes ago, great northern said: Afternoon tea, following a walk on a footpath, where three times I was nearly hit by speeding cyclists. Social distancing, and the fact it isn't a cycle path don't seem to matter to them. Rant over, Hi Gilbert Driving down this bit of road in Chelmsford to take Whisper for a walk I couldn't get past a cyclist who was taking up half the road, not using the cycle path. Next day I was walking along the footpath and Whisper, bless her cotton socks, steeped over the white line, "get F**king dog out the way" as a two wheeled Azoooomer approached from behind. I was well cross so I done a rant on faceache and to illustrate where I was talking about I used these Google images......you can't make this sort of thing up. 1 8 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted April 21, 2020 RMweb Premium Share Posted April 21, 2020 No Helmet....no respect. P 3 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted April 21, 2020 RMweb Premium Share Posted April 21, 2020 5 hours ago, landscapes said: Morning Gilbert Large match sticks make great fence posts just about the right size in 4mm scale and the wooden coffee stirrers cut down make ideal fence panels all fixed together with PVA glue. Regards David I was thinking of using stirrers but they have been kicked off the Forum. Sorry, couldn't resist that one; seriously I am considering using those wooden sticks, from a well known Coffee outlet, to do Barrow crossings and Ballast Bins and anything else that looks like it could be made from Planking/Sleepers. I do use them for other mundane things such as stirring paint and spreading materials. I use Magnum Sticks for shaping stuff like modelling plaster (usually Polyfilla type). Any excuse to have to get a Magnum Classic (Glute Free Ice Cream and Chocolate). P 5 Link to post Share on other sites More sharing options...
RMweb Premium great northern Posted April 21, 2020 Author RMweb Premium Share Posted April 21, 2020 6 minutes ago, Clive Mortimore said: Hi Gilbert Driving down this bit of road in Chelmsford to take Whisper for a walk I couldn't get past a cyclist who was taking up half the road, not using the cycle path. Next day I was walking along the footpath and Whisper, bless her cotton socks, steeped over the white line, "get F**king dog out the way" as a two wheeled Azoooomer approached from behind. I was well cross so I done a rant on faceache and to illustrate where I was talking about I used these Google images......you can't make this sort of thing up. Doesn't need a helmet - hasn't got a brain. As it happens, the path I was on becomes a dual purpose one a bit later. Same sign, and same result. Pedestrians must be pushed as close to the danger of the road as possible. 2 2 1 Link to post Share on other sites More sharing options...
bigwordsmith Posted April 21, 2020 Share Posted April 21, 2020 Ah Gilbert. 'Ought'. 'Should'. 'Must' - Surely the three horsemen of guilt? I once had a long discussion with a therapist about this after I had said 'I really should be....' to which she asked 'Whose version of 'should' is this? Yours or an imprint from your past?' A lot of the feeling of obligation we find ourselves facing in life comes from overlays - a desire to measure up to others' expectations of us on the sure realisation that we probably never will. It starts with parents, followed by mates, partners, spouses, colleagues and children. Rather than ever giving satisfaction, it is in fact a highway to mental hell. I learned may years ago that we enter this world alone, and leave it much the same way, and if we want to be truly happy with the directions of our lives need to be our own people and choose our own paths. It's very much the philosophy of my motorcycling brethren, but just because we ride our own course, doesn't mean we are not mindful of others, especially those less fortunate. After all, every one of us is just one small mistake away from a lengthy spell in orthopaedics, which we accept as part of the risk, and we accept that karma demands we pay back. Hence you see so much charity work done by hairy arsed old farts in leather, or guys in their 50's and 60's turning out at ungodly o'clock to rush blood and organs across the country to save a total stranger's life. It is also why when you see a biker at the side of the road, your first reaction is to stop and offer help. In many ways I find the folks on here, when they choose to be supportive rather than critical, have a similar approach. That, sometimes even more than the amazing modelling, is why I enjoy being part of your esteemed group of friends 4 2 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted April 21, 2020 RMweb Premium Share Posted April 21, 2020 4 minutes ago, bigwordsmith said: Ah Gilbert. 'Ought'. 'Should'. 'Must' - Surely the three horsemen of guilt? I once had a long discussion with a therapist about this after I had said 'I really should be....' to which she asked 'Whose version of 'should' is this? Yours or an imprint from your past?' A lot of the feeling of obligation we find ourselves facing in life comes from overlays - a desire to measure up to others' expectations of us on the sure realisation that we probably never will. It starts with parents, followed by mates, partners, spouses, colleagues and children. Rather than ever giving satisfaction, it is in fact a highway to mental hell. I learned may years ago that we enter this world alone, and leave it much the same way, and if we want to be truly happy with the directions of our lives need to be our own people and choose our own paths. It's very much the philosophy of my motorcycling brethren, but just because we ride our own course, doesn't mean we are not mindful of others, especially those less fortunate. After all, every one of us is just one small mistake away from a lengthy spell in orthopaedics, which we accept as part of the risk, and we accept that karma demands we pay back. Hence you see so much charity work done by hairy arsed old farts in leather, or guys in their 50's and 60's turning out at ungodly o'clock to rush blood and organs across the country to save a total stranger's life. It is also why when you see a biker at the side of the road, your first reaction is to stop and offer help. In many ways I find the folks on here, when they choose to be supportive rather than critical, have a similar approach. That, sometimes even more than the amazing modelling, is why I enjoy being part of your esteemed group of friends Blimey Smiffy, that was profound and very welcome my friend. Keep on truckin' Phil Link to post Share on other sites More sharing options...
bigwordsmith Posted April 21, 2020 Share Posted April 21, 2020 6 minutes ago, Mallard60022 said: Blimey Smiffy, that was profound and very welcome my friend. Keep on truckin' Phil Well As I officially hit the age of pension today I thought I should add something sensible to the conversation. Mind you HMG got the last laugh by making me wait another two years for me threepence ha'penny a week Don't worry, normal service will be resumed tomorrow! 2 Link to post Share on other sites More sharing options...
landscapes Posted April 21, 2020 Share Posted April 21, 2020 39 minutes ago, bigwordsmith said: Well As I officially hit the age of pension today I thought I should add something sensible to the conversation. Mind you HMG got the last laugh by making me wait another two years for me threepence ha'penny a week Don't worry, normal service will be resumed tomorrow! Happy Birthday if its today? David Link to post Share on other sites More sharing options...
landscapes Posted April 21, 2020 Share Posted April 21, 2020 (edited) 43 minutes ago, bigwordsmith said: Well As I officially hit the age of pension today I thought I should add something sensible to the conversation. Mind you HMG got the last laugh by making me wait another two years for me threepence ha'penny a week Don't worry, normal service will be resumed tomorrow! Happy Birthday if its today? David 59 minutes ago, Mallard60022 said: I was thinking of using stirrers but they have been kicked off the Forum. Sorry, couldn't resist that one; seriously I am considering using those wooden sticks, from a well known Coffee outlet, to do Barrow crossings and Ballast Bins and anything else that looks like it could be made from Planking/Sleepers. I do use them for other mundane things such as stirring paint and spreading materials. I use Magnum Sticks for shaping stuff like modelling plaster (usually Polyfilla type). Any excuse to have to get a Magnum Classic (Glute Free Ice Cream and Chocolate). P Hi Mallard60022 I am going to do exactly that on Haymarket, there is a very large timber foot crossing over all eight roads leading from the shed building out onto the main line and the cut down coffee stirrers will be ideal for that. Great tip about the Magnum sticks and a great excuse to buy some Magnums as well. Regards David Edited April 21, 2020 by landscapes spelling 1 Link to post Share on other sites More sharing options...
bigwordsmith Posted April 21, 2020 Share Posted April 21, 2020 Thanks David, it is indeed- worst one so far! 2 Link to post Share on other sites More sharing options...
RMweb Gold Tony Wright Posted April 21, 2020 RMweb Gold Share Posted April 21, 2020 5 hours ago, great northern said: Afternoon tea, following a walk on a footpath, where three times I was nearly hit by speeding cyclists. Social distancing, and the fact it isn't a cycle path don't seem to matter to them. Rant over, and here's an image. My heart sank when I looked at it, for once again we have a problem, bent rather than missing this time. I have by the way since found the loco and put it straight. Clearly, I don't notice these things at the time, and I will always go for overall impression, rather than fine detail. These things "should" be right, but I have learned from my mindfulness course that "should" and "ought" are not words which necessarily rule one's life. Does it ruin the photo for you? If so. I shall be more careful in future, provided I can find the bits which have fallen off. Just another Ivatt waiting to go back to the M&GN, but I liked the way the coaches of the departing train to the right framed the picture. Good evening Gilbert, I don't think it ruins the picture, but it does rather detract from it (a personal view), given that the composition is excellent. And, to pick up on another post, I think one can be supportive and critical at the same time; as long as that criticism is constructive. And, be backed up with offers of practical help where necessary. I try to go for an overall impression with my own modelling; 'sketch-book' I call it, but detail is still vital in my view. Regards, Tony. 2 3 1 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted April 21, 2020 RMweb Premium Share Posted April 21, 2020 5 hours ago, great northern said: My heart sank when I looked at it, for once again we have a problem, bent rather than missing this time. I have by the way since found the loco and put it straight. Don't be disheartened by comments concerning misplaced lamps, headboards, etc. - they only reflect the personal foibles of the commentator. Invariably, whenever I read such comments, I turn to the commentator's own thread and look critically at recently posted images - from my own perspective as a wagon builder. Without exception, I can find anomalies of equal or greater import to me - from my point of view, you understand. Criticism can be constructive - but it should be taken primarily as an expression of the criticiser's priorities, rather than a comment on any actual deficiencies in the model in question. Regards, John Isherwood. 5 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post great northern Posted April 21, 2020 Author RMweb Premium Popular Post Share Posted April 21, 2020 An 02 before bedtime. What could be nicer? 63957 on its way to Ferme Park with you know what. I forgot to dust it again, and that really is something that does bug me. I did actually build two of these back in the early days of Nu Cast. One I couldn't get to go together to my satisfaction at all, let alone run, and the other one looked OK but didn't run very well. I then had one built professionally through a local model shop in Worksop. It ran worse than mine. 28 1 4 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post great northern Posted April 22, 2020 Author RMweb Premium Popular Post Share Posted April 22, 2020 Blue skies once again, but I have duvet cover battling to sort before anything else. Morning pictures first, featuring the 9.47 Up Newcastle, in its Friday formation, when most of the train started from Tyne Commission Quay. The whole train can now be easily assembled from cassettes and loose stock, and this element is turning out to be one of the most satisfying aspects of layout running now. Two views of Grantham A3 Centenary running in at the North end. Still haven't got the lamps right. Never mind, can't see them in the next one. 30 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post great northern Posted April 22, 2020 Author RMweb Premium Popular Post Share Posted April 22, 2020 I think I've got that duvet cover proper cowed now. It hardly struggled this time. Housework does make the back ache though, so I've had enough for today. Back to PN after tea break. Elevenses photos follow Centenary at the south end, and empty another folder from nine days ago. 37 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post great northern Posted April 22, 2020 Author RMweb Premium Popular Post Share Posted April 22, 2020 Days back I did an image which was intended for an infrastruture shot, which I suupose it still is. It is now also useful as a before and after shot, showing what I've been up to down at the end of Station Road. There is nothing under the bridge, and some decidely overscale ground cover as well, which didin't match the other half of the loading dock. it is hard to see what there is under the bridge on prototype pictures, as it is always in deep shadow, but I can see at least one hut or shed under there, and there may well have been more. I had some lying around in the loft, so I decided to make use of them to fill in the void. Ground colour is now correct after I found the bag of stuff that had been missing for years. Nowhere near complete, as walls and fencing needed are in quarantine, but I'm happy that there is already an improvement. 28 Link to post Share on other sites More sharing options...
geoff west Posted April 22, 2020 Share Posted April 22, 2020 18 hours ago, great northern said: An 02 before bedtime. What could be nicer? 63957 on its way to Ferme Park with you know what. I forgot to dust it again, and that really is something that does bug me. I did actually build two of these back in the early days of Nu Cast. One I couldn't get to go together to my satisfaction at all, let alone run, and the other one looked OK but didn't run very well. I then had one built professionally through a local model shop in Worksop. It ran worse than mine. Love that second image Gilbert, but I do like an o2. 4 Link to post Share on other sites More sharing options...
RMweb Premium great northern Posted April 22, 2020 Author RMweb Premium Share Posted April 22, 2020 23 minutes ago, geoff west said: Love that second image Gilbert, but I do like an o2. TW and I had a chat on the phone this morning Geoff, and we both said that they were lovely engines in their own right, let alone for a heavy goods engine. That's why I've bent the truth a bit so that they can appear quite regularly on PN. The thought that they were very regularly on New England shed, just a mile away, but rarely came south of there, was too much to bear. 7 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post Tony Wright Posted April 22, 2020 RMweb Gold Popular Post Share Posted April 22, 2020 2 hours ago, great northern said: TW and I had a chat on the phone this morning Geoff, and we both said that they were lovely engines in their own right, let alone for a heavy goods engine. That's why I've bent the truth a bit so that they can appear quite regularly on PN. The thought that they were very regularly on New England shed, just a mile away, but rarely came south of there, was too much to bear. Nice to chat this morning Gilbert, As suggested, a couple of pics of the Nu-Cast O2/3 I built earlier this year. It is what it is - an old-fashioned, chunky, clunky white metal loco, though it does run very well (on its brass chassis - not the horrid white metal lump originally-supplied). It now has a vacuum cylinder on the back of the tender. Regards, Tony. 22 1 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post great northern Posted April 22, 2020 Author RMweb Premium Popular Post Share Posted April 22, 2020 And so once more to the late evening pictures. We have now come to the 9.55 Up Newcastle, which brings an A2 through PN. The only one we normally see is 60533, but here is the much rarer 60538. Velocity didn't get down south very often, or at least not when I was out and about. She will pause here for four minutes. Quite presentable for a Gateshead engine, apart from the dust. 30 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted April 23, 2020 RMweb Premium Share Posted April 23, 2020 5 hours ago, Tony Wright said: an old-fashioned, chunky, clunky white metal loco My favourite type of kit (perhaps not the clunky bit). Link to post Share on other sites More sharing options...
RMweb Premium Popular Post great northern Posted April 23, 2020 Author RMweb Premium Popular Post Share Posted April 23, 2020 Good morning all, and another very good one it is, wall to wall sunshine once again. At PN, the Northumbrian is due, and appears with 60111 Enterprise at the head. We appear to have a straight headboard and lamps, and most, if not all, of the front end accoutrements. I think the position of the loco on the curve is about right, and the two coaches are an effective backdrop. Also, there is no photoshopping at all, this is just as the camera saw it. I am therefore quite pleased. Enterprise heads onwards, passing a DMU arriving from Skegness. 41 Link to post Share on other sites More sharing options...
RMweb Gold A Murphy Posted April 23, 2020 RMweb Gold Share Posted April 23, 2020 Those last two shots look great Gilbert - the light seems just right. Regards, Alastair M 1 3 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now