stewartingram Posted January 31 Share Posted January 31 Anyone know of a 4mm source? I've just retrieved from my junk box an old MTK model that I built, probably back in the 80s. It has been in my 'for disposal' box for at least 25 years after I got the 1st Bachmann RTR model, but looking at it I've decided to keep it. Not much TLC needed to revive a good model, but the exhaust cone has gone missing. Stewart Link to post Share on other sites More sharing options...
NS Peak Posted February 13 Share Posted February 13 The Dapol 04 Drewry shunter kit might be an option. Or possibly (and I don’t know the MTK kit if it’s possible) go for an early Upwell example with no exhaust stack and cowcatcher and side plates Link to post Share on other sites More sharing options...
stewartingram Posted February 14 Author Share Posted February 14 When I made the MTK kit all those years ago, I did purchase a brass conical exhaust from somewhere - I think it was possibly A1 models? However I've gone through my extensive list of favourites of suppliers, and cannot find anyone that lists one. I have in my stash of disposable items, an Airfix 04 kit; upon checking, I've already nicked the cone from it for something els! I've found a few 04 kits on ebay and elsewhere, but at the moment we are talking around £15 and upwards; rather expensive for such a small item. I've already done a W&U D2202, with a new resin cab and sideskirts, and a narrow straight pipe. from brass tube. Link to post Share on other sites More sharing options...
RMweb Premium SteveyDee68 Posted February 14 RMweb Premium Share Posted February 14 Someone on eBay was selling a 3D printed W&U type class 04 tram - I think the chimney was a separate print* to be glued on: perhaps ask about purchasing that separately? Steve S * I may be misremembering, but I think it came with both conical and straight chimneys in case you wished to model an Ipswich 04 etc Link to post Share on other sites More sharing options...
RMweb Premium uax6 Posted February 14 RMweb Premium Share Posted February 14 Could you turn one up in a drill with a file perhaps? Andy G Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted February 14 RMweb Premium Share Posted February 14 Listed in the current Alan Gibson catalogue: 1 Link to post Share on other sites More sharing options...
SweenyTod1 Posted February 21 Share Posted February 21 Stewart, I've been in contact with Al at NUI models, who does the side skirts/ cowcatcher parts for adding to a Bachmann 04. I'm sure if you ask him nicely, he can print one if he doesn't already have one in stock. I too converted my 04 years ago to 11102, very pleased how it turned out! Tod Link to post Share on other sites More sharing options...
stewartingram Posted February 21 Author Share Posted February 21 I've now got one on order from Alan Gibson (along with some other parts for different locos). Having tried some 3d printed resin parts on another project, which proved too fragile for use, I prefer the brass one I have on order. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now