iL Dottore Posted January 15 Share Posted January 15 (edited) I've decided to go to 3mm modelling (a long story) and as I am starting from scratch I'll adopt the 14.2 mm standard. I believe that every modeller shoup play to his/her skills - which means I've got buildings, wagons and coaches pretty much sorted. The stumbling block are the locos, I suppose that - eventually - I'll have to build my own chassis, but in the interim I will scratch build a body and adapt an existing chassis for it. And there lies the rub: what best to adapt?: a 4mm chassis (reducing wheels etc) a 2mm chassis (and use larger wheels), or perhaps best of all (????) adapt one of the new TT loco chassis. As my first scratch built loco will be one of the simpler, boxier, GWR pannier tanks, I"m wondering which way to go (or perhaps even make my own lamibated plasticard chassis and just recucle motor and drive train from a 4mm, TT or N Gauge model. Thoughts? Comments? Edited January 15 by iL Dottore Link to post Share on other sites More sharing options...
Philou Posted January 15 Share Posted January 15 From what I have read elsewhere, locos are always going to be an issue in 3mm. I have seen that the 3mm Society do have some stocks locos and other rolling stock. Perhaps a visit to their thread may provide you with answers, particularly those of availability. I did see some photos and my impression was that most of the locos relied on the old Triang TT kit - there didn't seem to be much by way of 'modern' stuff. If I may boldly ask - why have you not gone for 1:120 (unless you've already got a lot of 3mm TT stock)? The new TT 1:120 seems to have taken off since last year and there's oodles of continental locos that could perhaps be adapted to your needs. Just my thoughts and good luck in your endeavour, Philip 1 Link to post Share on other sites More sharing options...
iL Dottore Posted January 15 Author Share Posted January 15 3 hours ago, Philou said: From what I have read elsewhere, locos are always going to be an issue in 3mm. I have seen that the 3mm Society do have some stocks locos and other rolling stock. Perhaps a visit to their thread may provide you with answers, particularly those of availability. I did see some photos and my impression was that most of the locos relied on the old Triang TT kit - there didn't seem to be much by way of 'modern' stuff. If I may boldly ask - why have you not gone for 1:120 (unless you've already got a lot of 3mm TT stock)? The new TT 1:120 seems to have taken off since last year and there's oodles of continental locos that could perhaps be adapted to your needs. Just my thoughts and good luck in your endeavour, Philip Thanks for the encouraging comments, Philip. Although I only have two 3mm kits (and little else), there's something about 3mm that appeals to me in a way that TT does not. I guess that it is because, despite many great kits, models and supplies from the 3mm society (I recently joined), each 3mm layout is truly unique. Unlike with 4mm - where many layouts have a certain sameness about them. I love building kits and scratch building and the only things that daunt me are (most) steam locos and points. Still, I'll get there (eventually). 2 1 Link to post Share on other sites More sharing options...
bradfordbuffer Posted January 16 Share Posted January 16 (edited) 8 hours ago, Philou said: From what I have read elsewhere, locos are always going to be an issue in 3mm. I have seen that the 3mm Society do have some stocks locos and other rolling stock. Perhaps a visit to their thread may provide you with answers, particularly those of availability. I did see some photos and my impression was that most of the locos relied on the old Triang TT kit - there didn't seem to be much by way of 'modern' stuff. If I may boldly ask - why have you not gone for 1:120 (unless you've already got a lot of 3mm TT stock)? The new TT 1:120 seems to have taken off since last year and there's oodles of continental locos that could perhaps be adapted to your needs. Just my thoughts and good luck in your endeavour, Philip Modern stuff https://lincoln-loco.co.uk plenty of locos to chose to from Edited January 16 by bradfordbuffer Link to post Share on other sites More sharing options...
Red Devil Posted January 16 Share Posted January 16 Reading your comments above it sounds very much like the situation I found myself in, like the look and idea of 3mm because building stuff is the fun bit and the individuality of a 3mm layout. Points.....in 14.2 the British Finescale ones through the society are a dream to build.....very very easy and quick, cannot recommend them enough. I've built a fair amount of track in the past and these are almost like the Airfix kits of pointbuilding, simple go together quickly and pretty fool proof, Chassis for steam era stuff. Not really where I've gone as a 3mm newbie, but I'd have thought a simple 0-6-0 inside motion tank as you suggest wouldn't be 'that hard'. Not something I've looked at but does the society do an etched chassis of suitable wheelbase and go from there? I've sorta downsized my 4mm ideas to 3mm and managed to get reasonable results in 3mm diesel chassis. I think a drive unit round the commercially available 3mm stuff might be a better starting point rather than hacking a 2mm or 4mm version up. Just my thoughts, again what works best for you is always the right answer! Look forward to seeing the resultswhichever way you go..... 1 1 Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted January 16 Share Posted January 16 (edited) Use of a RTR mechanism is going to be classic 'horses for courses'. OO will typically have too large a motor, unless there's a suitable 'industrial' or similar size mechnaism that's suitable, TT:120 likely to be the simpler option. Have fun! Edited January 16 by 34theletterbetweenB&D typo correction Link to post Share on other sites More sharing options...
fallen Posted March 27 Share Posted March 27 The 3mm society has just released a simple and cheap chassis jig system in two versions, 12mm and 14.2 mm. They have a booklet to go with these which explains how to build a simple 0-6-0 inside cylinder chassis with these jigs. Worth a look. (The booklet is on the 3mm society website but I don't seem to be able to download it on my elderly iPad. A problem I often have.) Frank 1 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now