RMweb Premium Sayajirao Posted November 22, 2023 RMweb Premium Share Posted November 22, 2023 I have just received a D6702 with the intention of using one of my spare decoders - I have several types which should be suitable, but non ESU. However there are no instructions with this model (other than dip switch positions for ESU or Non ESU decoders). This has not been powered up yet but I need to know what lighting should be available and how many functions are required to support them. I would rather be armed with this information before I start programming with some degree of certainty of what I should end up with. Regards, John Stather Link to post Share on other sites More sharing options...
Accurascale staff McC Posted November 22, 2023 Accurascale staff Share Posted November 22, 2023 Hi John The Dcc card with the model outlines all the auxiliary functions and what they do. Should help you decide how many functions you need. We also supply relatively inexpensive lokpilot for the 37 that comes preprogrammed. Our support team are also available through the little speech bubble on accurascale.com where we’d be delighted to assist. 1 1 Link to post Share on other sites More sharing options...
dave75 Posted November 22, 2023 Share Posted November 22, 2023 I'm in the same boat John! I think the answer is 21 pin but how many functions has me scratching my head. The lokpilot was showing as out of stock at Accurascale yesterday. @McC It would be helpful if you could answer the question on here. Link to post Share on other sites More sharing options...
Accurascale staff McC Posted November 22, 2023 Accurascale staff Share Posted November 22, 2023 You’ll need a 6 function 21 pin as a minimum for most functions. The lokpilots should be back in stock in a few weeks otherwise if you get a blank lokpilot we can help with config. 1 Link to post Share on other sites More sharing options...
Hamburger Posted November 22, 2023 Share Posted November 22, 2023 18 minutes ago, McC said: You’ll need a 6 function 21 pin as a minimum for most functions. The lokpilots should be back in stock in a few weeks otherwise if you get a blank lokpilot we can help with config. Aux3 & Aux4 amplified, or non-amplified? Link to post Share on other sites More sharing options...
RMweb Premium Sayajirao Posted November 25, 2023 Author RMweb Premium Share Posted November 25, 2023 On 22/11/2023 at 20:39, McC said: You’ll need a 6 function 21 pin as a minimum for most functions. The lokpilots should be back in stock in a few weeks otherwise if you get a blank lokpilot we can help with config. @McC could you let me have a comprehensive CV listing for the Lokpilot as I have had no success with the decoders I have. Have located a supply, assuming that this is the correct type - LOKPILOT 5 BASIC DCC 21PIN (4 + 8 Logic Functions). Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now