TrainsRule88 Posted September 23, 2023 Share Posted September 23, 2023 Hello everyone! I am currently planning an O gauge model railway. This will be my very first layout. It will only be a small O gauge layout but will be modular so can be extended in the future when space & finances allow. I am planning it to be modern image and mostly running DMU units such as the recently announced Heljan class 153. I would like to have a small platform (long enough for a 2 coach DMU) in like a southern style. Does anyone know of any good manufacturers of O gauge platform edges? Link to post Share on other sites More sharing options...
brossard Posted September 24, 2023 Share Posted September 24, 2023 I made mine using the Scalescenes kit: https://scalescenes.com/product/r008a-station-platform-with-shelter-and-lamp-hut/ Blow the prints up by 175% for 0 gauge. Lots of surface choices. John 1 Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted September 24, 2023 RMweb Premium Share Posted September 24, 2023 This is southern style concrete: https://www.keymodelworld.com/article/routemex-7mm-concrete-platform-edging Link to post Share on other sites More sharing options...
DCB Posted September 25, 2023 Share Posted September 25, 2023 Watch the platform height, most modellers make them too high, They should be a maximum of 3 scale feet 21mm in 0 for passenger platforms or the outward opening doors won't open. Bays and goods platforms are / were often 3ft 6" and passenger stock and passenger coach based full brakes doors wouldn't open. Buffer heights are 3ft 5" approx so make sure the platforms are lower than the buffer shanks if you want it to look right. I made mine too high and putting it right is a real PITA. 1 Link to post Share on other sites More sharing options...
RMweb Premium Solo Posted September 25, 2023 RMweb Premium Share Posted September 25, 2023 I would tend to go for platform edging only, as opposed to a complete kit. That way, you can make a curved platform if required, as the edging will be flexible. I made this one using the sections from 422 Models: https://www.422modelmaking.co.uk/platforms The sections go together seamlessly, and the faces are supported by blocks of extruded polystyrene cut to shape. It's on a gentle curve (not really visible from the photo). 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now