MarkSG Posted February 11 Share Posted February 11 2 hours ago, 57xx said: You. 😀 I'm not complaining. I've already got a replacement load lined up! 1 Link to post Share on other sites More sharing options...
Wickham Green too Posted February 11 Share Posted February 11 A set of hydraulic buffers ? 1 Link to post Share on other sites More sharing options...
MarkSG Posted February 11 Share Posted February 11 2 hours ago, Wickham Green too said: A set of hydraulic buffers ? No; it's going to be something agricultural. Because I need an excuse to have one on the W&U 🙂 2 Link to post Share on other sites More sharing options...
RMweb Gold gwrrob Posted February 11 RMweb Gold Share Posted February 11 7 minutes ago, MarkSG said: No; it's going to be something agricultural. Because I need an excuse to have one on the W&U 🙂 That sounds interesting, what do you have in mind. 1 Link to post Share on other sites More sharing options...
MarkSG Posted February 11 Share Posted February 11 13 minutes ago, gwrrob said: That sounds interesting, what do you have in mind. Well, the simple option, obviously, is a tractor from the Oxford Diecast range. I've already got a couple that are currently just scenic props, it would be easy enough to put one on a wagon instead. But it might be fun to have a go at scratchbuilding something that looks vaguely like some farm machinery. Or even put together a kit, if there is such a thing. 1 1 Link to post Share on other sites More sharing options...
Wickham Green too Posted February 11 Share Posted February 11 Preferably something larger than a tractor which could have been carried on a low-sided open ......... a threshing machine would make an impressive model ! 1 Link to post Share on other sites More sharing options...
MarkSG Posted February 11 Share Posted February 11 3 hours ago, Wickham Green too said: Preferably something larger than a tractor which could have been carried on a low-sided open ......... a threshing machine would make an impressive model ! Yes, although Lowmacs were often used for things which would still have headroom on a normal flat wagon. There's a reason why Rapido picked a wheelset for the included load, after all (and see photos linked earlier in the thread). So a tractor wouldn't be hugely unprototypical. But something a bit more specific would be good. 2 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted February 12 RMweb Gold Share Posted February 12 8 hours ago, MarkSG said: Yes, although Lowmacs were often used for things which would still have headroom on a normal flat wagon. There's a reason why Rapido picked a wheelset for the included load, after all (and see photos linked earlier in the thread). So a tractor wouldn't be hugely unprototypical. But something a bit more specific would be good. A bit of variety here; https://www.gaugemasterretail.com/categories/vehicles/vehicles-agricultural.html?limit=24 Then there are the Langley kits. Mike. 2 Link to post Share on other sites More sharing options...
Michael Hodgson Posted February 12 Share Posted February 12 16 hours ago, Wickham Green too said: Preferably something larger than a tractor which could have been carried on a low-sided open ......... a threshing machine would make an impressive model ! 2 Link to post Share on other sites More sharing options...
RMweb Gold gwrrob Posted February 12 RMweb Gold Share Posted February 12 7 hours ago, Enterprisingwestern said: A bit of variety here; https://www.gaugemasterretail.com/categories/vehicles/vehicles-agricultural.html?limit=24 That light blue Fowler plough looks like it would be perfect for a three plank wagon load.😉 1 Link to post Share on other sites More sharing options...
MarkSG Posted February 12 Share Posted February 12 1 minute ago, gwrrob said: That light blue Fowler plough looks like it would be perfect for a three plank wagon load.😉 Wrong era for me, that's more suited to a pre-grouping or Big 4 layout whereas mine is set in early BR days. But the Walthers Scenemaster Plough and Planter would be perfect, despite being American and 1/87 scale. Farm machinery varies in size anyway, so the slightly smaller scale would simply give the impression of a slightly smaller piece of equipment. And that kind of equipment was common globally, not just in the US. Unfortunately, Gaugemaster don't have any in stock, and nor does any other UK stockist I've checked. And I'm not paying £20 postage to get a £17 model shipped from the US! 1 1 Link to post Share on other sites More sharing options...
RMweb Premium it's-er Posted February 12 RMweb Premium Share Posted February 12 I was surprised to find that an Oxford Diecast road roller on a Cambrian kit built GWR Loriot fits within the loading gauge. That was how it happened in 1/76 scale, where the road roller, the Loriot and the loading gauge are scale models, so I assume this works at full size. But I still wonder about this! John S 1 Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted February 13 RMweb Gold Share Posted February 13 (edited) 9 hours ago, it's-er said: I was surprised to find that an Oxford Diecast road roller on a Cambrian kit built GWR Loriot fits within the loading gauge. That was how it happened in 1/76 scale, where the road roller, the Loriot and the loading gauge are scale models, so I assume this works at full size. But I still wonder about this! John S IIRC, such vehicles usually had the chimney taken off and carried separately when being transported by rail, so I suspect they didn't fit within gauge everywhere. Much of the GWR was more generously proportioned than other lines in that respect. Also, of course, it's unlikely that road rollers and traction engines of different makes were all constructed to a common set of dimensions. John Edited February 13 by Dunsignalling 3 Link to post Share on other sites More sharing options...
Wickham Green too Posted February 13 Share Posted February 13 2 hours ago, Dunsignalling said: ... it's unlikely that road rollers and traction engines of different makes were all constructed to a common set of dimensions. Spot the difference ..... Fawley Hill : 28/8/23 4 Link to post Share on other sites More sharing options...
MarkSG Posted February 13 Share Posted February 13 (edited) 19 hours ago, it's-er said: I was surprised to find that an Oxford Diecast road roller on a Cambrian kit built GWR Loriot fits within the loading gauge. That was how it happened in 1/76 scale, where the road roller, the Loriot and the loading gauge are scale models, so I assume this works at full size. But I still wonder about this! One of the Oxford Rail warwells comes with the roller as a load https://www.oxforddiecast.co.uk/products/warwell-with-steam-road-engine-dm721211-or76ww009 But, as stated earlier, it's unlikely, in reality, that it would be transported like that. Typically, the roof and chimney would removed to lower the profile and minimise the risk of damage in transit. And, with the roof off, it would also probably be covered with a tarpaulin to protect it from the elements. It would be fairly easy to modify an Oxford road roller to be a load like that, but if it's going to be hidden from view with a tarpaulin then it's a bit of a waste of a model. You could mock up a convincingly roller-shaped load covered in a tarpaulin with a few bits of spare plastic. If you want a visibly agricultural load on the wagon, then something like a plough or harrow would be a more realistic option. That's my plan for the lowmac, anyway. Edited February 13 by MarkSG 3 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted February 13 RMweb Premium Share Posted February 13 14 hours ago, it's-er said: I was surprised to find that an Oxford Diecast road roller on a Cambrian kit built GWR Loriot fits within the loading gauge. That was how it happened in 1/76 scale, where the road roller, the Loriot and the loading gauge are scale models, so I assume this works at full size. But I still wonder about this! John S The LORIOT will (prototypically) accommodate a Ruston Bucyrus crawler face shovel. In fact, the shovel fits the British loading gauge so closely that I suspect that it was intentionally designed to do just that! CJI. 3 1 Link to post Share on other sites More sharing options...
Wickham Green too Posted February 13 Share Posted February 13 Now ..... er ...... which 100% standardised British loading gauge might you be referring to there ??!? 🙄 2 Link to post Share on other sites More sharing options...
RMweb Gold gwrrob Posted April 9 RMweb Gold Share Posted April 9 On 27/08/2023 at 18:23, Ribird said: What exactly is different from these to the Loriot P? As Corbs said above, buffers and axleboxes, etc. Is there anything else? Would the buffers and axleboxes be the same as on the Loriot Y? I'm currently working on an old Wrenn model and looking forward to doing something similar on the Rapido lowmac. 4 Link to post Share on other sites More sharing options...
'CHARD Posted April 9 Share Posted April 9 I wonder, was this type of wagon used for the movement/ delivery of things like weaving looms in the UK? I've seen pictures of such machines on international/ ferry wagons being imported from Europe for delivery, but was there a domestic supply too? 1 Link to post Share on other sites More sharing options...
Wickham Green too Posted April 10 Share Posted April 10 I suspect British weaving looms - back in the days they were available - would have been supplied as kits of parts and built on site ................... inserting fully assembled looms into each floor of a dark satanic mill would have been no easy task. 3 1 Link to post Share on other sites More sharing options...
Bishdurham Posted May 12 Share Posted May 12 On 10/04/2024 at 05:58, Wickham Green too said: I suspect British weaving looms - back in the days they were available - would have been supplied as kits of parts and built on site ................... inserting fully assembled looms into each floor of a dark satanic mill would have been no easy task. But that was how Jerusalem was built! 2 Link to post Share on other sites More sharing options...
Fredo Posted June 8 Share Posted June 8 Hi Rapido, any ideas if we will be able to see the first painted samples soon? Fred 1 Link to post Share on other sites More sharing options...
RMweb Gold gwrrob Posted June 8 RMweb Gold Share Posted June 8 5 hours ago, Fredo said: Hi Rapido, any ideas if we will be able to see the first painted samples soon? Fred It must be soon @Fredo as the delivery is stated for July-September this year. https://rapidotrains.co.uk/lner-lms-25t-machine-wagon/ 1 Link to post Share on other sites More sharing options...
RMweb Gold gwrrob Posted July 26 RMweb Gold Share Posted July 26 On 08/06/2024 at 18:06, gwrrob said: It must be soon @Fredo as the delivery is stated for July-September this year. https://rapidotrains.co.uk/lner-lms-25t-machine-wagon/ The latest newsletter has these currently on the boat and due in retailers late September/early October. 6 2 Link to post Share on other sites More sharing options...
RMweb Gold gwrrob Posted July 31 RMweb Gold Share Posted July 31 Here's another image spotted on Farcebook. 5 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now