No Decorum Posted August 17, 2023 Share Posted August 17, 2023 1 hour ago, MPR said: Working Caprotti? Simples. How about working sanders? (71000 restarting near Dainton summit, 4th May 2008) After all the trouble we take to keep track clean? 🤣 3 Link to post Share on other sites More sharing options...
No Decorum Posted August 17, 2023 Share Posted August 17, 2023 1 hour ago, atom3624 said: Here's a thing ... A/Scale managed to introduce brake linkage chains to the proprietary market, could it be possible they also introduce a lighting system for steam locomotives ... with any additional new steam locomotives introduced? Al. Now there’s a thought. The problem is that headcodes differ. I had thought perhaps live lamp irons insulated from the chassis and lamps in contact with both, so that a lamp would light if put on the iron. Difficult and likely pricey. Also, lamps in steam days were very dim, although bright enough if viewed from straight ahead. They weren’t even lit in daytime. Still, it’s worth mentioning now and again just in case a manufacturer decides to give it a try. 2 Link to post Share on other sites More sharing options...
atom3624 Posted August 17, 2023 Share Posted August 17, 2023 I suppose the 'main 3' - through goods, stopping passenger, and express passenger - but as you say, some clever and robust electronics would be required - and a way of ensuring the lamps don't get lost! Too true, the the firebox was probably the brightest thing on 'steamies'. Al. 1 Link to post Share on other sites More sharing options...
atom3624 Posted August 17, 2023 Share Posted August 17, 2023 3 hours ago, MPR said: Working Caprotti? Simples. How about working sanders? (71000 restarting near Dainton summit, 4th May 2008) Working sanders? Next we'll all have little oil cans topping up the linkages each time a steamie stops in a station!! Imagine the 'dirt' everywhere - superfine grit - from the sanders!! Al. 1 Link to post Share on other sites More sharing options...
RMweb Premium Pteremy Posted August 20, 2023 RMweb Premium Share Posted August 20, 2023 Not suggesting that it should be the next steam locomotive, but is there scope for Accurascale 'rescuing' the Hattons 14xx, as they are doing with the Class 66?? 1 6 Link to post Share on other sites More sharing options...
G-BOAF Posted August 20, 2023 Share Posted August 20, 2023 2 hours ago, Pteremy said: Not suggesting that it should be the next steam locomotive, but is there scope for Accurascale 'rescuing' the Hattons 14xx, as they are doing with the Class 66?? Better to start again on that one i think 3 Link to post Share on other sites More sharing options...
No Decorum Posted August 20, 2023 Share Posted August 20, 2023 6 minutes ago, G-BOAF said: Better to start again on that one i think I wonder. The body is quite good, apart from the hole where the brass numberplate goes and the lack of the bottom of the firebox. A decent finish would be welcome but Accurascale has shown itself capable of that with the Manor. A new chassis and motor would be required though. We are still rather lacking a decent up-to-date version. I wonder how Accurascale would cope with the size. Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted August 20, 2023 RMweb Gold Share Posted August 20, 2023 6 minutes ago, No Decorum said: I wonder. The body is quite good, apart from the hole where the brass numberplate goes and the lack of the bottom of the firebox. A decent finish would be welcome but Accurascale has shown itself capable of that with the Manor. A new chassis and motor would be required though. We are still rather lacking a decent up-to-date version. I wonder how Accurascale would cope with the size. I think this is a good example of a loco that would sell by the bucket load. That's the thing with small tank locos, they can operate on branch lines, shunting yards and main lines alike, so they are of interest to many people, no matter how big or small their layout is. That's the problem with all these big main line tender locos as far as I am concerned, they are of little operational value to anyone with a small layout depicting a branch line or yard etc. unless you are also a collector with a large gap in your wall-mounted showcase. Some of the more venerable tank locos, that made it to the BR era could be produced in a variety of liveries and possibly body modifications, in other words I would suggest that a GWR 2021 pannier would sell more units that a 'Duke of Gloucester'. 2 3 1 Link to post Share on other sites More sharing options...
RMweb Premium Islesy Posted August 20, 2023 RMweb Premium Share Posted August 20, 2023 Just now, Captain Kernow said: I would suggest that a GWR 2021 pannier would sell more units that a 'Duke of Gloucester'. I don’t think that there’s any doubt about that… 3 2 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted August 20, 2023 RMweb Gold Share Posted August 20, 2023 Just now, Islesy said: I don’t think that there’s any doubt about that… And hopefully make Accurascale more money as well, plus satisfying more modellers overall... 4 1 Link to post Share on other sites More sharing options...
No Decorum Posted August 20, 2023 Share Posted August 20, 2023 Big steamers are very impressive and I love them. Another factor in small tank locos outselling them is that the latter are considerably cheaper. 1 Link to post Share on other sites More sharing options...
Ollie K Posted August 20, 2023 Share Posted August 20, 2023 Interesting thread. As a fully paid up LNER Pacific fan(atic) the loco I’d most like to see is… a C12 4-4-2T (GNR C2)! Operated out of KGX on suburban services, as various main line station pilots (KGX, Peterborough, Grantham etc) then on branches in Lincs and Yorks until the late Fifties. Sadly with none preserved to scan, no ‘namers’ and only one livery that isn’t basically black (beautiful GNR green) my expectations are well and truly managed, but wholeheartedly agree that there’s more to life - even for an ECML modeller- than the big glamour locos. (Wikipedia Commons image) 4 Link to post Share on other sites More sharing options...
owentherail Posted August 20, 2023 Share Posted August 20, 2023 I hope for a King or Castle.... suspect a rebuilt WC 1 1 Link to post Share on other sites More sharing options...
Black 5 Bear Posted August 20, 2023 Share Posted August 20, 2023 (edited) 4 hours ago, Islesy said: I don’t think that there’s any doubt about that… I can see 71000 being a (newly tooled) HD limited edition at some time in the future. Edited August 20, 2023 by Black 5 Bear 1 Link to post Share on other sites More sharing options...
Black 5 Bear Posted August 20, 2023 Share Posted August 20, 2023 21 minutes ago, owentherail said: I hope for a King or Castle.... suspect a rebuilt WC IMHO, The Hornby rebuilt WC and BOB class certainly hold their own in the current market. The airsmooth version on the other hand could do I with a revamp to modern day standards. I've got a feeling we'll see a new Rebuilt MN before either of the above! 3 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted August 20, 2023 RMweb Premium Share Posted August 20, 2023 33 minutes ago, Black 5 Bear said: IMHO, The Hornby rebuilt WC and BOB class certainly hold their own in the current market. The airsmooth version on the other hand could do I with a revamp to modern day standards. I've got a feeling we'll see a new Rebuilt MN before either of the above! It must have a robust Gearing set up. Phil 1 Link to post Share on other sites More sharing options...
Black 5 Bear Posted August 20, 2023 Share Posted August 20, 2023 10 minutes ago, Mallard60022 said: It must have a robust Gearing set up. Phil Absolutely Phil ! Link to post Share on other sites More sharing options...
RMweb Gold checkrail Posted August 20, 2023 RMweb Gold Share Posted August 20, 2023 The only additional loco I really crave (apart from a 44xx - on the way we hear) is a GWR Bulldog (preferably of the 'Bird' series). But as few of the class survived to the early 1950s, and so many people want to model the remembered scenes of their 1950s/60s childhoods, I realise that I'm very unlikely to see this wish come true! Perhaps 'historical railway modelling' could be defined as modelling a period before one was born? John C. 1 2 1 Link to post Share on other sites More sharing options...
RMweb Gold Roy Langridge Posted August 20, 2023 RMweb Gold Share Posted August 20, 2023 GWR 517 for me please… Roy Link to post Share on other sites More sharing options...
Super-Sloth Posted August 21, 2023 Share Posted August 21, 2023 The argument “X manufacture have just made one”, doesn’t necessarily make a difference to me and plenty like me. Bachmann and A/S have just recently launched new 37’s. I can’t be the only person who has ordered multiple variants from each manufacturer. Similarly, both Hornby and Bachmann have had a crack at the 9f. I don’t spend money with Hornby and similarly of the 2 Bachmann supplied 9f’s I purchased, one was replaced 3 times and I couldn’t be bothered to order a replacement for the faulty no2. So of 4 models that came to me, they have all gone back with a variety of issues. So… since this thread has turned into a wish list, can I have a 9F please? :) 1 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted August 21, 2023 RMweb Gold Share Posted August 21, 2023 Of course, if capitalising on existing tooling for the Manor, another GW tender loco beckons, but one which is arguably worthy of another look would be the Collett 22XX 0-6-0... I don't think anyone has suggested this so far? 4 2 Link to post Share on other sites More sharing options...
Jon Harbour Posted August 21, 2023 Share Posted August 21, 2023 (edited) I'm sure it's in the mix there somewhere.... I would love one to be honest! There - two sales! That means it must happen! ;) Edited August 21, 2023 by Jon Harbour 1 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted August 21, 2023 RMweb Gold Share Posted August 21, 2023 I can imagine that AS would make a very good job of depicting the inside valve gear on the 22XX, even if only a dummy set, as it is quite prominent on these locos, possibly more so than on most other locos on which it has been done. 2 Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted August 21, 2023 Share Posted August 21, 2023 There are some interesting steam subjects that were 'problems' for RTR OO manufacture in the not too distant past, for which good solutions have now been demonstrated on models I have purchased: Rapido, a single, Hornby, small locos, Bachmann, 4-4-2 and 0-4-4T's, all with stable traction and no recourse required to traction tyres. (There are probably yet more, my interest leads to LNER and some LMS group purchases.) Happily awaiting an Accurascale J69 with a fully concealed drive and plentiful traction, of accurate exterior appearance enabled by superior construction technique. (4' diameter wheels under a metal kit body with the footplate top 4'5" above rail top was not a happy combination...) On 20/08/2023 at 10:50, Pteremy said: Not suggesting that it should be the next steam locomotive, but is there scope for Accurascale 'rescuing' the Hattons 14xx, as they are doing with the Class 66?? First question specific to this would be 'is there anything worthwhile to rescue?' The technique to deliver traction from the awkward mechanism layout is now proven, but the body construction has to be very different from past all plastic bodied models. Fresh start would be better I feel. 1 Link to post Share on other sites More sharing options...
RMweb Premium Pteremy Posted August 21, 2023 RMweb Premium Share Posted August 21, 2023 2 hours ago, 34theletterbetweenB&D said: First question specific to this would be 'is there anything worthwhile to rescue?' The technique to deliver traction from the awkward mechanism layout is now proven, but the body construction has to be very different from past all plastic bodied models. Fresh start would be better I feel. Given that McC has agreed with you it seems that further comment might be pointless. But i guess it depends on what there is to build on. The general view was that the body was fine, but the mechanism wasn't. And then there were issues about the design of how the body and mechanism were put together (that is removing the body was quite difficult without breaking bits). It could be that there is excellent research that could be reused but needing a completely different execution. A 'fresh start' does not necessarily require the junking of any 'IP' that is still fit for purpose (if you see what I mean). 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now