TomJ Posted August 4, 2023 Share Posted August 4, 2023 For locos produced by Farish both past and present (black 5, 8F, castle etc) is there anyway of telling from the numbers if it’s an old Poole tooling or a modern Bachmann release. Because I know Bachmann did sell some of the older locos - and so the box still says “Graham Farish by Bachmann” Seen an offer on eBay at a decent price but hard to tell from photos (unboxed) which it is Thanks Link to post Share on other sites More sharing options...
DaveArkley Posted August 4, 2023 Share Posted August 4, 2023 54 minutes ago, TomJ said: For locos produced by Farish both past and present (black 5, 8F, castle etc) is there anyway of telling from the numbers if it’s an old Poole tooling or a modern Bachmann release. Because I know Bachmann did sell some of the older locos - and so the box still says “Graham Farish by Bachmann” Seen an offer on eBay at a decent price but hard to tell from photos (unboxed) which it is Thanks I look for the tiny front bogie wheels. No guarantee if they are not tiny that it's a new one as seller may have fitted a more modern bogie, but a useful clue if they are tiny/pizza cutters as I can't imaging anyone fitting an old bogie to a newer loco. Cheers Dave 1 1 Link to post Share on other sites More sharing options...
TomJ Posted August 4, 2023 Author Share Posted August 4, 2023 I fear I may have just paid over the odds for a 20+yr old model that won’t run on my DCC layout. Caveat emptor! My fault - I’d completely forgotten the history of Farish and the older models Fingers crossed I can cancel or sort it out. 1 Link to post Share on other sites More sharing options...
RMweb Premium Steven B Posted August 4, 2023 RMweb Premium Share Posted August 4, 2023 Silver wheels is the big give-away, although in the year or two prior to the Poole factory closing Farish did start chemically blackening wheelsets. Early Chinese releases of the Poole era models had an improved chassis. Looking for DCC compatibility is the big thing to look out for. Many Poole era steam locos tended to have the coupling rods screwed to just the middle set of driving wheels - molded pips on the outer ones. Molded on handrails were standard on Poole models too. You can find N Gauge catalogues for Farish up to 2007 here: https://www.ness-st.co.uk/N-gauge-catalogues.html Farish under Bachmann ownership have re-issues new models with numbers previously made in Poole. Steven B 2 1 Link to post Share on other sites More sharing options...
RMweb Premium acg5324 Posted August 5, 2023 RMweb Premium Share Posted August 5, 2023 19 hours ago, Steven B said: Silver wheels is the big give-away, although in the year or two prior to the Poole factory closing Farish did start chemically blackening wheelsets. Early Chinese releases of the Poole era models had an improved chassis. Looking for DCC compatibility is the big thing to look out for. Many Poole era steam locos tended to have the coupling rods screwed to just the middle set of driving wheels - molded pips on the outer ones. Molded on handrails were standard on Poole models too. You can find N Gauge catalogues for Farish up to 2007 here: https://www.ness-st.co.uk/N-gauge-catalogues.html Farish under Bachmann ownership have re-issues new models with numbers previously made in Poole. Steven B Interesting link…..had a nosey at the 2007 catalogue…..9F and Class 222……..don’t think either appeared. If you type in the 9F catalogue number it brings up the WD! Link to post Share on other sites More sharing options...
Standards_in_OO Posted August 5, 2023 Share Posted August 5, 2023 Despite the differences in quality with those older models compared to today, the range was pretty big in the Poole/early Bachmann years. Nice to see a bit of nostalgia with all those old catalogues! 1 Link to post Share on other sites More sharing options...
Padishar Creel Posted August 6, 2023 Share Posted August 6, 2023 Hallo, item numbers of Poole produced models were 4digits, Chinese produced models are 3-3digits. es grüßt pc 1 Link to post Share on other sites More sharing options...
TomJ Posted August 6, 2023 Author Share Posted August 6, 2023 5 hours ago, Padishar Creel said: Hallo, item numbers of Poole produced models were 4digits, Chinese produced models are 3-3digits. es grüßt pc Is that still the case for Poole era tooling models that were later released and sold by Bachmann? I know of a few that this could apply to Link to post Share on other sites More sharing options...
RMweb Premium Kris Posted August 6, 2023 RMweb Premium Share Posted August 6, 2023 (edited) 51 minutes ago, TomJ said: Is that still the case for Poole era tooling models that were later released and sold by Bachmann? I know of a few that this could apply to If it is a Poole era designed model that has been produced in China it will have the 6 digit number. Edited August 6, 2023 by Kris Link to post Share on other sites More sharing options...
Padishar Creel Posted August 7, 2023 Share Posted August 7, 2023 19 hours ago, Kris said: If it is a Poole era designed model that has been produced in China it will have the 6 digit number. Well said. Thought that was a given 🙃 ...and also Made in China stamped on the underneath of the item. UK produced models have Britain stamped on it. Also noticed that the box of old Poole items produced before the transition have yellow stripes at each end Link to post Share on other sites More sharing options...
RMweb Premium Steven B Posted August 8, 2023 RMweb Premium Share Posted August 8, 2023 20 hours ago, Padishar Creel said: Also noticed that the box of old Poole items produced before the transition have yellow stripes at each end Apart from the ones that don't: https://www.ebay.co.uk/itm/314759229412?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=qugrzrkjrbi&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY A white/cream colours vac-formed box insert is another thing more likely to be found on a Poole era model - some Chinese produced models have them but the vast majority are clear plastic. I don't believe Bachmann used the white box inserts on any Chinese made locos. Steven B Link to post Share on other sites More sharing options...
RMweb Premium John M Upton Posted August 8, 2023 RMweb Premium Share Posted August 8, 2023 But then with second hand, you need to watch out for old Poole tooling items being sold in new tooling boxes, Mk1 coaches in particular are good for this (usually accidental) issue. 1 1 Link to post Share on other sites More sharing options...
Padishar Creel Posted August 8, 2023 Share Posted August 8, 2023 1 hour ago, Steven B said: Apart from the ones that don't: Steven B touché 😂 1 Link to post Share on other sites More sharing options...
Zunnan Posted August 8, 2023 Share Posted August 8, 2023 Another thing to look out for with the Poole (and ex-Poole) steam locomotives is the motor extending into the cab and a lack of cab glazing, but the main and quickest giveaway is the already mentioned wheels. Drivers are of solid non-see through plastic centres with spindly thin spoke representations usually with solid spoked tiny pony wheels although the Prarie, 4MT, 8F and Crab have larger sized pony wheels. The coaches are pretty easy to tell apart too. They're too flush glazed for starters with poorly defined gangway bellows and the bogie mounted coupler pockets stand out a mile. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now