Wickham Green too Posted September 22, 2023 Share Posted September 22, 2023 Must admit I was thinking along the same lines - why would a hinged panel need anything other than standard locks ? ........... but I can't suss out how those yellow things might function ! Whatever they were they seem to have disappeared ! : http://www.cs.rhrp.org.uk/se/CarriageInfo.asp?Ref=4122 Link to post Share on other sites More sharing options...
RMweb Premium keefer Posted September 22, 2023 RMweb Premium Share Posted September 22, 2023 (edited) They might have been on one side only (with roof exhaust panel on the left)? The more recent photo linked above is of the other side. More digging required🙂 EDIT: 1982 pic of other side at departmentals.com https://www.departmentals.com/photo/975325 Edited September 22, 2023 by keefer Link to post Share on other sites More sharing options...
Penrhos1920 Posted September 22, 2023 Share Posted September 22, 2023 On 10/09/2023 at 14:57, Rugd1022 said: I don't think we've had this former GW Sleeping car at Liskeard which was used a staff mess room, photo c/o the Cornwall Railway Society site... It was still there when I took this photo in August '89, you can see the end of it on the left of the pic... (I suppose technically it belongs in the 'grounded van body' thread but i couldn't find it!) I don’t think that is a sleeper. It looks more like a clerestory restaurant/dining car with kitchen at the near end. The GWR built 6 between 1896 & 99. They were regularly updated/rebuilt, but only 2 made it past 1931. Link to post Share on other sites More sharing options...
RMweb Gold russ p Posted September 22, 2023 RMweb Gold Share Posted September 22, 2023 1 hour ago, GordonC said: The yellow things look to be in the middle of the panel rather than on the outside for locking. The whole panel doesn't look like it has any hinges but a definite line around it separating it from the rest of the bodywork. Can that whole panel be slid out possibly and thats handles or lifting points if whats on the other side is weighty? I reckon it's probably batteries Gordon. The coach batteries wouldn't be suitable for starting the big train supply alternator 1 Link to post Share on other sites More sharing options...
RMweb Gold russ p Posted September 22, 2023 RMweb Gold Share Posted September 22, 2023 1 hour ago, Wickham Green too said: Must admit I was thinking along the same lines - why would a hinged panel need anything other than standard locks ? ........... but I can't suss out how those yellow things might function ! Whatever they were they seem to have disappeared ! : http://www.cs.rhrp.org.uk/se/CarriageInfo.asp?Ref=4122 I didn't realise that was the same vehicle I've worked with that when acting guard Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted September 22, 2023 RMweb Premium Share Posted September 22, 2023 3 hours ago, GordonC said: The yellow things look to be in the middle of the panel rather than on the outside for locking. The whole panel doesn't look like it has any hinges but a definite line around it separating it from the rest of the bodywork. Can that whole panel be slid out possibly and thats handles or lifting points if whats on the other side is weighty? Agreed - I would hazard a guess that, being out-of-gauge, they are detachable handling brackets. It's even possible that the panel fronts something such as a battery compartment, that slides out in the same way as a drawer. CJI. 1 Link to post Share on other sites More sharing options...
RMweb Gold SHMD Posted September 23, 2023 RMweb Gold Share Posted September 23, 2023 On 19/09/2023 at 17:53, montyburns56 said: W80976 Guide Bridge 1978 by Geoff Dowling Dapol have just announced these. They are doing all that were made (7off) including this one - albeit in pristine condition. Looks fabulous but a bit pricey at £150! Kev. 3 Link to post Share on other sites More sharing options...
montyburns56 Posted September 23, 2023 Author Share Posted September 23, 2023 (edited) ADE321072 Cambridge Yard 194 by Freight Frog Edited September 23, 2023 by montyburns56 13 Link to post Share on other sites More sharing options...
Wickham Green too Posted September 23, 2023 Share Posted September 23, 2023 Is it a coach or is it a plate wagon ? Link to post Share on other sites More sharing options...
Nearholmer Posted September 23, 2023 Share Posted September 23, 2023 It looks like a coach for warming plates, before they are passed forward to a restaurant car to be filled with food. 2 Link to post Share on other sites More sharing options...
Wickham Green too Posted September 23, 2023 Share Posted September 23, 2023 ..... I guess the bell rings when they're ready. 1 Link to post Share on other sites More sharing options...
Nearholmer Posted September 23, 2023 Share Posted September 23, 2023 (edited) Or, is it a MOSCOW (Mobile Sandwich Conditioning Workshop)? I know that a couple were created for Travellers Fare by converting Mk1 horse boxes. They were intended to be used to pre-stale sandwiches before they were wrapped, to avoid any possibility of them being put on sale in a palatable condition, but the programme was discontinued after it was found that the bread and cheese were available pre-staled from the suppliers. One was later converted to a bread pudding steaming van and allocated to Shrewsbury, where the buffet was famed for this delicacy (it really was!). Edited September 23, 2023 by Nearholmer 2 9 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted September 23, 2023 RMweb Premium Share Posted September 23, 2023 1 minute ago, Nearholmer said: Or, is it a MOSCOW (Mobile Sandwich Conditioning Workshop)? I know that a couple were created for Travellers Fare by converting Mk1 horse boxes. They were intended to be used to pre-stale sandwiches before they were wrapped, to avoid any possibility of them being put on sale in a palatable condition, but the programme was discontinued after it was found that the bread and cheese was available pre-staled from the suppliers. One was later converted to a bread pudding steaming van and allocated to Shrewsbury, where the buffet was famed for this delicacy (it really was!). The bread pudding, presumably, being produced from stale pre-staled bread? CJI. 1 Link to post Share on other sites More sharing options...
Matt37268 Posted September 23, 2023 Share Posted September 23, 2023 Seriously what on earth is it? Very intriguing. (And as I type this I’m about 600 yards from where the pic was taken 😀) Link to post Share on other sites More sharing options...
RMweb Premium pete_mcfarlane Posted September 23, 2023 RMweb Premium Share Posted September 23, 2023 It's a steam heating van (for pre-heating carriages, especially sleepers). More photos here. https://www.departmentals.com/departmental/041978 It does look like it has appeared in an episode of 'Pimp my ride'. 1 Link to post Share on other sites More sharing options...
KeithHC Posted September 24, 2023 Share Posted September 24, 2023 9 hours ago, pete_mcfarlane said: It's a steam heating van (for pre-heating carriages, especially sleepers). More photos here. https://www.departmentals.com/departmental/041978 It does look like it has appeared in an episode of 'Pimp my ride'. Ah so it must be a mobile Christmas pudding maker. One for Hornby to make for the Christmas train set. or could it be a top secret batter pudding maker that would be hidden in Bexhill just don’t tell Ned Seagoon Keith 1 Link to post Share on other sites More sharing options...
montyburns56 Posted September 25, 2023 Author Share Posted September 25, 2023 NER Horse box to Weighing Machine conversion DE320800 Wymondham 1974 9 Link to post Share on other sites More sharing options...
Wickham Green too Posted September 25, 2023 Share Posted September 25, 2023 Why did anyone think that was a horsebox ? - it's clearly a parcels brake. 2 Link to post Share on other sites More sharing options...
RMweb Premium keefer Posted September 26, 2023 RMweb Premium Share Posted September 26, 2023 (edited) One of the Flickr comments suggests ex-NER Van dia.171? (I've no idea if that's right or not) Edited September 26, 2023 by keefer Link to post Share on other sites More sharing options...
jwealleans Posted September 26, 2023 Share Posted September 26, 2023 Roof is wrong for a D171. I think it's an ex-luggage brake as has been suggested. 1 Link to post Share on other sites More sharing options...
billbedford Posted September 26, 2023 Share Posted September 26, 2023 It is a D.171. If you look closely at the roof it has a flat platform at the near end. Though this one was built with square-cornered panels. Link to post Share on other sites More sharing options...
Wickham Green too Posted September 26, 2023 Share Posted September 26, 2023 2 hours ago, billbedford said: It is a D.171. If you look closely at the roof it has a flat platform at the near end. Though this one was built with square-cornered panels. That flat roof portion seems to be a common feature of Pooley Van conversions .......... is it ONLY to get the stovepipe within gauge ??!? Link to post Share on other sites More sharing options...
jwealleans Posted September 26, 2023 Share Posted September 26, 2023 That seems a lot of work: was there some sort of internal structure or roof mounting which required the flat roof area? Link to post Share on other sites More sharing options...
RMweb Premium Daddyman Posted September 26, 2023 RMweb Premium Share Posted September 26, 2023 (edited) On 20/08/2023 at 14:25, Compound2632 said: The carriage is evidently a retired all first and presumably originally six-wheeled? Looks to me to be of NER origin, an opinion assisted by the van looking very much like a NER G1. Looks like an NER Diag. 79a "Ordinary First" - four compartments with double panels between compartments. As you suspected, originally 6-wheeled. EDIT: I'm talking about the carriage back on page 8, not the D.171 on this page. Edited September 26, 2023 by Daddyman 1 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted September 26, 2023 RMweb Gold Share Posted September 26, 2023 1 hour ago, jwealleans said: That seems a lot of work: was there some sort of internal structure or roof mounting which required the flat roof area? On some Pooley vans, I don't know about this specific one, there was a crane/hoist built into the body to lift the weights in and out so maybe it was part of this modification? Mike. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now