petemster Posted March 25, 2023 Share Posted March 25, 2023 I have just checked the website of a well-known 'O' gauge retailer. In the section listing Heljan locomotives, under "Features included," several models include "NEM pocket for couplers." For example : Large Prairie, Class 20, 26, 27, 37/0, 37/4, 47, 58 and 73. As it happens I will be away from home for the next two days, but when I get back I will email the retailer for confirmation or clarification of this. Link to post Share on other sites More sharing options...
Goodnight Sweetheart Posted March 26, 2023 Share Posted March 26, 2023 I’d personally love to see any modern (1980-present) wagon from the team, we’ve loads of modern locos, few RTR wagons to hang behind them. When I say “any” wagon, I would say small to medium size. I think Dapol have made a mistake modelling the large hopper wagons to go with the 66, they certainly missed a trick not going for a medium sized wagon like the Thrall BYA steel wagon, seen nationally and often in very short trains and sometimes on their own. For the BR era something like the BLA or BAA wagons like Cavlax have made. if they where to shrink ray the OO range, then the blinding choice would be the JSA wagons, just like the BYA they're often seen in short takes and on their own. On the other hand, loco wise…….a Class 67 in O plenty of colour schemes, approaching 25 years old now with a wide operational range Scotland, Penzance, Wales, Norwich, Kent, North East & West and everywhere in between, more or less stasnrd body shells (from a non expert POV) and can be used on freight, Mail, passenger, test trains and light loco from a modelling POV. Not a huge Deltic size loco, nice medium sized loco with very wide spread appeal. Link to post Share on other sites More sharing options...
Goodnight Sweetheart Posted March 26, 2023 Share Posted March 26, 2023 On 03/03/2023 at 15:44, Pmorgancym said: 153, with full lighting, sound and opening doors You’d of thought opening doors on DMUs is the next step in the DCC evolution, we’d got DCC operating Pans why not passenger doors ? Link to post Share on other sites More sharing options...
goldfish Posted March 26, 2023 Share Posted March 26, 2023 (edited) 22 hours ago, F-UnitMad said: In O Gauge?? O Gauge doesn't use NEM pockets. Dapol does in their Stroudley 4-wheel coaches, although they use 00/H0 ones rather than the 0 gauge ones. Edited March 26, 2023 by goldfish Corroct spulling. 1 Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted March 26, 2023 RMweb Premium Share Posted March 26, 2023 48 minutes ago, goldfish said: Dapol does in their Stroudley 4-whel coaches, although they use 00/H0 ones rather tyhan the 0 gaouge ones. If they use OO Gauge tension lock couplings on those O Gauge coaches, they would be positively discreet compared to OO Gauge haha Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted March 26, 2023 RMweb Premium Share Posted March 26, 2023 If I had an area I'd like to see innovation, rather than opening doors or toy couplings, an improvement in the quality of moulded glazing would be a great step forwards in all scales. 5 1 Link to post Share on other sites More sharing options...
RMweb Gold markjj Posted March 31, 2023 RMweb Gold Share Posted March 31, 2023 The FNA in 7mm would be nice. Once you have the bogies I'm sure it would lead you to other future options to. Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted April 15, 2023 RMweb Premium Share Posted April 15, 2023 21 and 24.5t minerals. Potential for body variations with number of doors, with/without top flaps and both 4 and 8 shoe brakes. Clever design could potentially get a few different types from the basic set up. Covers steam and diesel era, ran in long rakes and might even be able to use the chassis for other wagons as well. Dapol have pretty much cleaned up on the likely top sellers with wide bang for their buck of investment but this is a gap I think. Link to post Share on other sites More sharing options...
Pint of Adnams Posted April 15, 2023 Share Posted April 15, 2023 On 04/03/2023 at 20:10, Michael Hodgson said: So given you've had to do the research and CAD etc, are you going to shrink it down to 4mm? Just so long as you've picked Thomas. Or just maybe they've done the research and are blowing it up to 7mm 😍 Link to post Share on other sites More sharing options...
47606odin Posted April 16, 2023 Share Posted April 16, 2023 I think accurascale should join the DMU manufacturing ranks by making a 150 with working sliding doors. I think they are up to it if they want to practice with a 156 with less doors, that’s great too 1 Link to post Share on other sites More sharing options...
Goodnight Sweetheart Posted April 16, 2023 Share Posted April 16, 2023 On 31/03/2023 at 20:37, markjj said: The FNA in 7mm would be nice. Once you have the bogies I'm sure it would lead you to other future options to. We’d need the ultimate O gauge Class 37 to haul then….. 6 Link to post Share on other sites More sharing options...
RMweb Premium New Haven Neil Posted April 16, 2023 RMweb Premium Share Posted April 16, 2023 Somehow I get the feeling a J67/8/9 is what we'll get..... 2 1 Link to post Share on other sites More sharing options...
47606odin Posted April 27, 2023 Share Posted April 27, 2023 On 03/03/2023 at 17:36, Accurascale Fran said: Hi everyone, Excellent to see that there is interest in us doing more O gauge. So much so, we want to let you into a little secret... We can confirm that we have designed our first O gauge locomotive and it is going to tooling in the coming weeks. It is not a locomotive currently in our OO range, so it is O gauge from the ground up. Feel free to wildy speculate on what it might be! We will reveal it when tooling is complete and a pre-production sample is in hand later this year. Cheers! Fran if it’s not a class 68 I’ll be disappointed. I’m sue you could do one justice, and then who knows, even an 88 Link to post Share on other sites More sharing options...
Goodnight Sweetheart Posted April 27, 2023 Share Posted April 27, 2023 Although a Class 68 would be good, it’s not got “many” liveries… DRS as delivered DRS revised with new corporate name, which slips my mind right now. TPE Chiltern Although the sphere of operation is good, pretty much every corner of the UK on various traffics. But…….. If your looking for a commercial proposition with a decent livery suit, combined with the modellers need for a go anywhere loco you can’t do much better (than what’s been already produced) than a Class 67 with over 20 livery schemes over 30 locos that’s got to be up there with the most colourful Class compare to the fleet size? EWS as delivered Royal Train - early EWS Royal Train - late DB Chiltern Silver unbranded Wrexham & Shoprshire Arriva Trains Wales unbranded Transport for Wales early Transport for Wales late EWS executive train EWS era EWS executive train DB era DBS branded DB maple leaf DB small branding QE2 platinum scheme Pullman Colas GBRF Cally Sleeper Any more ? A decent suite for a standard run, and a few for specials. Link to post Share on other sites More sharing options...
Goodnight Sweetheart Posted April 27, 2023 Share Posted April 27, 2023 On 03/03/2023 at 09:36, Accurascale Fran said: Hi everyone, Excellent to see that there is interest in us doing more O gauge. So much so, we want to let you into a little secret... We can confirm that we have designed our first O gauge locomotive and it is going to tooling in the coming weeks. It is not a locomotive currently in our OO range, so it is O gauge from the ground up. Feel free to wildy speculate on what it might be! We will reveal it when tooling is complete and a pre-production sample is in hand later this year. Cheers! Fran Will whatever the loco maybe have the DCC and Sound option ? Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted April 27, 2023 RMweb Gold Share Posted April 27, 2023 just had a horrible thought (for my wallet) - a 9F! 5 Link to post Share on other sites More sharing options...
RMweb Premium Islesy Posted April 27, 2023 RMweb Premium Share Posted April 27, 2023 4 hours ago, Goodnight Sweetheart said: Will whatever the loco maybe have the DCC and Sound option ? It will, yes. Link to post Share on other sites More sharing options...
RMweb Premium andythenorth Posted April 27, 2023 RMweb Premium Share Posted April 27, 2023 I'm betting it's the Kof from Eastleigh. And a surprise one in TT:120 too? 😛 2 Link to post Share on other sites More sharing options...
Covkid Posted April 27, 2023 Share Posted April 27, 2023 9 hours ago, Goodnight Sweetheart said: Although a Class 68 would be good, it’s not got “many” liveries… DRS as delivered DRS revised with new corporate name, which slips my mind right now. TPE Chiltern Although the sphere of operation is good, pretty much every corner of the UK on various traffics. I have noticed that just recently 68014 has had a new livery Link to post Share on other sites More sharing options...
RMweb Premium Solo Posted August 12, 2023 RMweb Premium Share Posted August 12, 2023 (edited) Is there any news on this project, perhaps a hint as to whether it will be steam or diesel? Edited August 12, 2023 by Solo spelling Link to post Share on other sites More sharing options...
brossard Posted August 12, 2023 Share Posted August 12, 2023 Only just found this. Another manufacturer doing 0 gauge would be welcome I think. If it is to be steam, my vote would be for something that is NOT GWR. There is only one RTR LMS model (that I know of) and that is the Dapol Jinty. I've always liked the 2F 0-6-0 tender loco. John 2 1 Link to post Share on other sites More sharing options...
RMweb Premium Islesy Posted August 12, 2023 RMweb Premium Share Posted August 12, 2023 (edited) 2 hours ago, Solo said: Is there any news on this project, perhaps a hint as to whether it will be steam or diesel? Well, the project is in tooling, and on schedule for its announcement. Close enough that I need to start on a 7mm onlooker… Edited August 12, 2023 by Islesy 6 1 Link to post Share on other sites More sharing options...
RMweb Premium Solo Posted August 12, 2023 RMweb Premium Share Posted August 12, 2023 34 minutes ago, Islesy said: Well, the project is in tooling, and on schedule for its announcement. At Guildex, perhaps? Link to post Share on other sites More sharing options...
JaymzHatstand Posted August 13, 2023 Share Posted August 13, 2023 20 hours ago, Islesy said: Close enough that I need to start on a 7mm onlooker… Excellent! Is it close umenough that I need to get another print of myself in 7mm?! Though would a steam loco crew member be appropriate I wonder?! That's me with the left arm raised, and my good friend Graeme as the fireman. Cheers J 1 Link to post Share on other sites More sharing options...
Rugd1022 Posted August 13, 2023 Share Posted August 13, 2023 (edited) On 26/02/2023 at 12:32, paulbb said: A Class 22 diesel, perfect for branches main lines and everything else! It a big missing gap in the O gauge hydraulic fleet -apart from the D600s of course, though one of them would not go amiss either. Please beat Heljan and Dapol to it, pretty please too! Yes a 22 would be very nice indeed, lots of variations in front end styles and liveries amongst the fifty eight locos built, short lived they may have been but they had bags of character... Whilst it might seem to be a bit of a minefield with three distinct batches in the initial build (D6300-D6305, D6306-D6333, D6334-D6357) and several modifications along the way, it's do-able. This is a great place to start... Edited August 13, 2023 by Rugd1022 1 4 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now