Ribird Posted January 25, 2023 Share Posted January 25, 2023 (edited) I’m also surprised to see no mention of the 5 Gold Plated Dublo Flying Scotman’s (five R numbers) exclusive to TMC for £500 https://www.facebook.com/100063533384494/posts/pfbid0VLGKjSoitQFFGehQk4pVsq7qypBiF9XoazrjBQ1JRHNBq4hMnW8jD3gQPhShz8nSl/?mibextid=UUgoR4 Edited January 25, 2023 by Ribird Forgot Link Link to post Share on other sites More sharing options...
Black 5 Bear Posted January 25, 2023 Share Posted January 25, 2023 (edited) 1 hour ago, Ribird said: You are absolutely correct, we’ve only seen production samples of the FS Dublo range. That was me assuming they would do that, which we don’t know. (My bad for assuming) But we also don’t know if this is true for everything else. We’ve only seen samples of the Dublo SNG. And old?? model shots for the GG Dublo range? What Hornby says and does are two different things. But why on earth would Hornby produce one HD A4 SNG with an upgraded wheelset and another, the GG A4 variants with the previous incarnation components? Sorry, but to do otherwise doesn't make any commercial sense! The changes I refer to are being introduced on some existing locos such as the 2022 main range A4 Golden Fleece. Maybe the new 2022/23 models will all be available with a LED glowing firebox as has happened with the current A1/A3 offering? Edited January 25, 2023 by Black 5 Bear 1 Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted January 25, 2023 RMweb Premium Share Posted January 25, 2023 (edited) 3 hours ago, Ribird said: I’m also surprised to see no mention of the 5 Gold Plated Dublo Flying Scotman’s exclusive to TMC for £500 https://www.facebook.com/100063533384494/posts/pfbid0VLGKjSoitQFFGehQk4pVsq7qypBiF9XoazrjBQ1JRHNBq4hMnW8jD3gQPhShz8nSl/?mibextid=UUgoR4 Tier 1 exclusive, not just TMC. I’ve preordered the USA version. Normal one for running and the Gold Plated one for display cabinet. Edited January 25, 2023 by Hilux5972 Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted January 25, 2023 RMweb Gold Share Posted January 25, 2023 5 hours ago, Ribird said: I’m also surprised to see no mention of the 5 Gold Plated Dublo Flying Scotman’s exclusive to TMC for £500 https://www.facebook.com/100063533384494/posts/pfbid0VLGKjSoitQFFGehQk4pVsq7qypBiF9XoazrjBQ1JRHNBq4hMnW8jD3gQPhShz8nSl/?mibextid=UUgoR4 Oh, 5 variants, not 5 models. I thought that was a bit too exclusive! 2 Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted January 25, 2023 RMweb Gold Share Posted January 25, 2023 2 hours ago, Hilux5972 said: Tier 1 exclusive, not just TMC. I’ve preordered the USA version. Normal one for running and the Gold Plated one for display cabinet. How many tier 1s are there? I might be getting close to a TMC exclusive ;) 2 Link to post Share on other sites More sharing options...
RMweb Gold Captain_Mumbles Posted January 26, 2023 RMweb Gold Share Posted January 26, 2023 On 18/01/2023 at 08:47, palmsticks said: Hello All, Regards the two LNER liveried Gresley pacifics which are not Flying Scotsman (Nu) "Hornby Dublo" or A4s:- R30270 - Class A1 No. 4478 "Hermit" - "Big 4 Celebration range" - List price £218.99 - ETA Q3/4 2023 R30216 - Class A3 No. 2573 "Harvester" - "Main Range" - List price £252.99 - ETA Q3/4 2023 https://uk.Hornby.com/products/lner-class-a1-4-6-2-4478-hermit-big-four-centenary-collection-era-3-r30270?_br_psugg_q=r30270 https://uk.Hornby.com/products/lner-a3-class-no2573-harvester-diecast-footplate-and-flickering-firebox-era-3-r30216 Is anybody aware of a specification difference between the models, aside that obviously the A1 has short travel valvegear and 180psi boiler vs. the A3 long travel valve gear and a 220psi boiler? EDIT: and cab cut outs! I am motivated to ask this as there is a price difference. They both seem to have the same features (dicast running plate, fire LED, 21 pin DCC, 5 pole motor, tender, proper green livery etc) and I assume that they use the same chassis and body tooling accept a couple of tweaks for the A3's valve gear and super heater covers. Many thanks! 4478 Hermit looks to me like the earlier GNR type with slightly taller chimney and cab, large cab cutout, ect. More like the older 1470 Great Northern model. This is exciting for me as it appeals to my taste. I am not sure why the wheels dont look lined though, I am no expert. The white in the lining on the A3 Harvester looks wider to me too. 1 Link to post Share on other sites More sharing options...
RMweb Gold palmsticks Posted January 26, 2023 RMweb Gold Share Posted January 26, 2023 (edited) 17 hours ago, Captain_Mumbles said: 4478 Hermit looks to me like the earlier GNR type with slightly taller chimney and cab, large cab cutout, ect. More like the older 1470 Great Northern model. This is exciting for me as it appeals to my taste. I am not sure why the wheels dont look lined though, I am no expert. The white in the lining on the A3 Harvester looks wider to me too. Good spot. Although, the cab is possibly not cut down (which might be right, Yeadon's doesn't say when they got modified although it must be after 1925 (named) but before 1936-8 (general repairs, prob got cab mod earlier if date on pic from Flickr is correct) anybody got RCTS LNER engines Part 2A?). As built, the cab roof was originally in line with the cab ventilator and the cab side grab rail was originally inline with the short one along the firebox, but when modified to suit composite loading gauge the cab was lowered identifiable by ventilator sticking up, and grab rails not lining up. From the image, it looks like it is a bit lowered but only a bit so could be camera angle. This may of course change on the production run models compaired to these publicity shots. Same goes for the lining. Hopefully, the standard is as good as the batch they released in 2022 (Knight of Thistle and Doncaster) . Toying with the idea of an identity change to 2573 to become 2750 Papyrus although cab cutouts are wrong for the year I would like and reverser rod is in on the wrong side. I'm supprised they've not done her before but I'm sure they'll do her at some point, probably the 100th aniversay of 108mph in 2035! This one below though..... *lust* Edited January 26, 2023 by palmsticks 5 Link to post Share on other sites More sharing options...
RMweb Gold Captain_Mumbles Posted January 27, 2023 RMweb Gold Share Posted January 27, 2023 51 minutes ago, palmsticks said: Good spot. Although, the cab is possibly not cut down (which might be right, Yeadon's doesn't say when they got modified although it must be after 1925 (named) but before 1936-8 (general repairs, prob got cab mod earlier if date on pic from Flickr is correct) anybody got RCTS LNER engines Part 2A?). As built, the cab roof was originally in line with the cab ventilator and the cab side grab rail was originally inline with the short one along the firebox, but when modified to suit composite loading gauge the cab was lowered identifiable by ventilator sticking up, and grab rails not lining up. From the image, it looks like it is a bit lowered but only a bit so could be camera angle. This may of course change on the production run models compaired to these publicity shots. Same goes for the lining. Hopefully, the standard is as good as the batch they released in 2022 (Knight of Thistle and Doncaster) . Toying with the idea of an identity change to 2573 to become 2750 Papyrus although cab cutouts are wrong for the year I would like and reverser rod is in on the wrong side. I'm supprised they've not done her before but I'm sure they'll do her at some point, probably the 100th aniversay of 108mph in 2035! This one below though..... *lust* In my limited knowlege, 4479 'Robert the Devil' was the last one built with the GNR high cab. So if Hermit was to have this, it is in a place in time that makes historical sense. I might be ignorant, but Hornby models over the years have been equipped with a high cab (that looks just a whisker too low), for some reason a mid cab that is too high for a low cab, and the later low cab. So it can be sometimes hard to tell which one they are modelling. I don't know if it is common knowledge, but: I have shells with high-ish cabs, and low chimneys and domes. And then also some with the opposite! High chimney and dome with a low-ish cab. (Yes I am looking at you, Railroad Flying Scotsman!) In any case, I for one would love a high cab model in the range! 1 Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted January 27, 2023 RMweb Gold Share Posted January 27, 2023 Having watched last night's repeat of the Hornby TV show, I'd say a revised Rebuilt MN is pretty certain to be in next year's announcements. John 1 3 1 Link to post Share on other sites More sharing options...
Standards_in_OO Posted January 27, 2023 Share Posted January 27, 2023 1 hour ago, Dunsignalling said: Having watched last night's repeat of the Hornby TV show, I'd say a revised Rebuilt MN is pretty certain to be in next year's announcements. John I think so too. It seemed like that second episode they kind of mentioned that they were working on one. 2 Link to post Share on other sites More sharing options...
JamieR4489 Posted January 27, 2023 Share Posted January 27, 2023 20 hours ago, palmsticks said: Toying with the idea of an identity change to 2573 to become 2750 Papyrus although cab cutouts are wrong for the year I would like and reverser rod is in on the wrong side. The drive is also on the wrong side. 2573 was rebuilt from an A1 in 1928 and retained the right-hand drive until the 1950s whereas 2750 was built as an A3 so it had left-hand drive (this means the vacuum ejector pipe is on the wrong side of the boiler on 2573 for 2750). Annoyingly, Hornby have never done a pre-war left-hand drive A3 with the GNR tender. The easiest way to make one would probably be to get Book Law and either Flying Fox or Gladiateur and swap the tenders over. 19 hours ago, Captain_Mumbles said: In my limited knowlege, 4479 'Robert the Devil' was the last one built with the GNR high cab. I think it was 4481 St Simon. Interestingly, 4481 retained the high ventilator when its cab was cut down. This unique cab was transferred to Merry Hampton at some point. 2 Link to post Share on other sites More sharing options...
RMweb Gold palmsticks Posted January 28, 2023 RMweb Gold Share Posted January 28, 2023 22 hours ago, JamieR4489 said: The drive is also on the wrong side. 2573 was rebuilt from an A1 in 1928 and retained the right-hand drive until the 1950s whereas 2750 was built as an A3 so it had left-hand drive (this means the vacuum ejector pipe is on the wrong side of the boiler on 2573 for 2750). Annoyingly, Hornby have never done a pre-war left-hand drive A3 with the GNR tender. The easiest way to make one would probably be to get Book Law and either Flying Fox or Gladiateur and swap the tenders over. Thanks for this. I thought modifying the reversing rod etc would be relatively easy but forgot about the vacuum ejector pipe which looks a bit harder to deal with to swap sides without damaging the livery. Good suggestion on other candidates that could form the basis of an identity swap, will take a look. It's a shame that Hornby are modelling 2573 Harvester in her A3 guise and not A1, as in that state she formed the basis of a famous* miniature locomotive in 10.25" gauge built by HCS Bullock in 1936. * = very niche level of fame. 1 1 Link to post Share on other sites More sharing options...
Coldgunner Posted February 15, 2023 Share Posted February 15, 2023 Just had the email through for the Dublo great gathering A4's, £320.99 for each loco is a fair chunk of change. I don't doubt that they probably look good and are gonna heavy, but I don't think I'll see many on layouts tbh. I get the impression this is for the collectors to lap up. 1 1 Link to post Share on other sites More sharing options...
rogerzilla Posted February 16, 2023 Share Posted February 16, 2023 How close is Firdaussi to Papyrus (as a possible identity swap)? It was built 5 years later, also as an A3. It's still scandalous that Papyrus was scrapped and we only have FS, which is a right mashup. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Johan DC Posted February 16, 2023 RMweb Premium Share Posted February 16, 2023 It looks like Tiger is avaible now, are the coal wagons a new tooling? Link to post Share on other sites More sharing options...
BernardTPM Posted February 16, 2023 Share Posted February 16, 2023 A variation on the Rocket tender, something that was frequently done way back when the Kitmaster, later Airfix, Rocket came out. 1 Link to post Share on other sites More sharing options...
RMweb Premium PeterStiles Posted February 16, 2023 RMweb Premium Share Posted February 16, 2023 (edited) 4 minutes ago, BernardTPM said: A variation on the Rocket tender, I'd heard, in these very hallowed halls, that the prototype tender for the prototype rocket was a "mod" from existing wagons, so this isn't as far-fetched as it could sound. Edited February 16, 2023 by PeterStiles added word "prototype" Link to post Share on other sites More sharing options...
BernardTPM Posted February 16, 2023 Share Posted February 16, 2023 True, and I doubt anyone has photos to prove otherwise! 1 Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted February 16, 2023 RMweb Premium Share Posted February 16, 2023 Finally had a reply to one of my questions on one of Hornby’s Facebook posts. Apparently the USA Scotsman’s 2nd tender will have updated tooling. Hopefully that means no more massive D coupling at one end. 2 1 Link to post Share on other sites More sharing options...
JamieR4489 Posted February 16, 2023 Share Posted February 16, 2023 9 hours ago, rogerzilla said: How close is Firdaussi to Papyrus (as a possible identity swap)? It was built 5 years later, also as an A3. Unfortunately, it's no better than Book Law. Firdaussi was one of only 9 A3s to have a banjo dome whereas Papyrus had a round dome until 1943 and then a streamlined one. Papyrus alternated several times between GNR and 1928 corridor tenders but after 07/09/1937 it had a 1930 New Type non-corridor until 1953. Book Law and Firdaussi both had 1930 New Types but the dome issue makes Book Law a better donor. Jamie 1 1 Link to post Share on other sites More sharing options...
Coldgunner Posted February 16, 2023 Share Posted February 16, 2023 2 hours ago, Hilux5972 said: Finally had a reply to one of my questions on one of Hornby’s Facebook posts. Apparently the USA Scotsman’s 2nd tender will have updated tooling. Hopefully that means no more massive D coupling at one end. Wonder if that'll be a modification of the original water tender tool or a newer one? I have a feeling the D links will be shaved off and an NEM pocket added and that's it. Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted February 17, 2023 RMweb Premium Share Posted February 17, 2023 4 hours ago, Coldgunner said: Wonder if that'll be a modification of the original water tender tool or a newer one? I have a feeling the D links will be shaved off and an NEM pocket added and that's it. I’m hoping at the very least it’s got an NEM pocket at both ends! Separate handrails etc hopefully as well. It would have been nice if it was a totally new tooling seeing as it’s going on a premium Dublo model. Could also have been used for Dublo versions of blue Bittern as 4492 and Green UoSA 60009. We shall see how much it’s improved/retooled I guess. 2 Link to post Share on other sites More sharing options...
RMweb Gold palmsticks Posted February 18, 2023 RMweb Gold Share Posted February 18, 2023 On 16/02/2023 at 10:11, rogerzilla said: It's still scandalous that Papyrus was scrapped 100%. Although, in the warehouse of the NRM... Perhaps in the future, the technology will exist to extract the locomotive DNA from a sample and grow a new one? On 16/02/2023 at 10:11, rogerzilla said: we only have FS, which is a right mashup. Still grateful for all the machines that still exist, and the people who made it happen and worked on them. 4472 is probably in better condition now than it has ever been thanks to Riley's an co. Thanks for the suggestion for Firdaussi for the ID swap. However, i'm going to use Brook Law for the reasons pointed out by @JamieR4489. Link to post Share on other sites More sharing options...
Trevor Hammond Posted February 18, 2023 Share Posted February 18, 2023 On 17/02/2023 at 02:04, Hilux5972 said: I’m hoping at the very least it’s got an NEM pocket at both ends! Separate handrails etc hopefully as well. It would have been nice if it was a totally new tooling seeing as it’s going on a premium Dublo model. Could also have been used for Dublo versions of blue Bittern as 4492 and Green UoSA 60009. We shall see how much it’s improved/retooled I guess. The second tender never ran behind UoSA. It ran behind Bitten in both BR green and Garter Blue, when Bittern was masquerading as Dominion of New Zealand. Link to post Share on other sites More sharing options...
Ribird Posted February 18, 2023 Share Posted February 18, 2023 (edited) On 16/02/2023 at 12:43, Hilux5972 said: Finally had a reply to one of my questions on one of Hornby’s Facebook posts. Apparently the USA Scotsman’s 2nd tender will have updated tooling. Hopefully that means no more massive D coupling at one end. Is there any way you could link that post they replied on? Or screenshot the comment? Please Found it: Edited February 18, 2023 by Ribird Found it 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now