RMweb Premium St Enodoc Posted October 4, 2022 RMweb Premium Share Posted October 4, 2022 If you ever have a chance to go behind one of Ian's layouts you will probably notice some funny or even rude comments written on the non-viewing side of some of the buildings. Link to post Share on other sites More sharing options...
sb67 Posted October 4, 2022 Share Posted October 4, 2022 (edited) 8 hours ago, PMP said: Yep just three, I have cut two other points to make representations of catch points, but the 'operating' points are just the three you see in the image. Here's a YT video of the operation while under test, Thank you, that shows how simple but adaptable and operational his plans are. My latest layout is the same basic plan but with a tweak. I'll look forward to seeing more of Shelfie3. Edited October 4, 2022 by sb67 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP Posted October 4, 2022 RMweb Premium Share Posted October 4, 2022 13 hours ago, sb67 said: Thank you, that shows how simple but adaptable and operational his plans are. My latest layout is the same basic plan but with a tweak. I'll look forward to seeing more of Shelfie3. This isn’t one of Ian’s plans, it’s mine. I’m pretty sure Ian hasn’t used this configuration in a layout that’s been exhibited or published. The concept I used was based on Banbury Merton Street, and a section from a CJ Freezer plan. 2 1 2 Link to post Share on other sites More sharing options...
Markeg Posted October 7, 2022 Share Posted October 7, 2022 Ian spoke at a British Railway Modellers of Australia Convention here in Melbourne Australia a number of years ago and I ended up building a small O gauge exhibition layout with 2 points. 8' (2.4m) x 1'6" (450mm). Fits in the back of my car (Estate in UK Station Wagon in OZ). This inspired a number of others to get into O gauge. So his tenticles/inspiration has invaded the antipides. I should add I am planning to extend and have a third point. Mark 6 Link to post Share on other sites More sharing options...
sleepyrider Posted November 9, 2023 Share Posted November 9, 2023 I'm also a big fan of Ian's layout, my favourites being Newcastle Haymarket and Victoria Park, both of which I've been lucky enough to see. I'm intrigued by the curved version of Haymarket that was teased in the November 2020 Railway Modeller. I've waited patiently for this to appear, to no avail. Anyone know if its been featured or appeared anywhere and I've missed it? Link to post Share on other sites More sharing options...
sb67 Posted November 9, 2023 Share Posted November 9, 2023 3 hours ago, sleepyrider said: I'm also a big fan of Ian's layout, my favourites being Newcastle Haymarket and Victoria Park, both of which I've been lucky enough to see. I'm intrigued by the curved version of Haymarket that was teased in the November 2020 Railway Modeller. I've waited patiently for this to appear, to no avail. Anyone know if its been featured or appeared anywhere and I've missed it? I'm waiting for that too, it did look interesting. Link to post Share on other sites More sharing options...
DavidB-AU Posted November 10, 2023 Share Posted November 10, 2023 5 hours ago, sleepyrider said: I'm intrigued by the curved version of Haymarket that was teased in the November 2020 Railway Modeller. To me it looked more like a curved version of Percy Street, which was modified by David Hampson to become Oldham King Street. 3 Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted November 10, 2023 RMweb Gold Share Posted November 10, 2023 On 23/09/2022 at 20:18, New Haven Neil said: Ian is able to inject character into his layouts, seeming at will - not all of us are so able! The circular layout really did something for me, and I only recall seeing one more elsewhere, a SR 3rd rail electric job. Oh, Robin Hood's Bay too I suppose, but that was/is huge! I have only just come across this interesting thread. MidEssex MRC had a lovely circular layout (Blackwell Brewery). I can't quite date it - failing memory - but it may have predated Glen Douglas. 1 Link to post Share on other sites More sharing options...
SD85 Posted December 6, 2023 Share Posted December 6, 2023 Does anyone remember Cold Harbour Lane? A NE based shed scene that turned up in RM in about 1998. 1 Link to post Share on other sites More sharing options...
sb67 Posted December 7, 2023 Share Posted December 7, 2023 19 hours ago, SD85 said: Does anyone remember Cold Harbour Lane? A NE based shed scene that turned up in RM in about 1998. Must have missed that one! Did a search and apparently the track plan is very similar to this. Very intriguing, can't find any photo's but there was a thread on here on a layout based on the plan. https://www.rmweb.co.uk/forums/topic/81764-webb-lane/ 2 Link to post Share on other sites More sharing options...
RMweb Premium Moxy Posted December 7, 2023 RMweb Premium Share Posted December 7, 2023 I think I missed Cold Harbour Lane as well. There are some pictures of it in the April 1998 Railway Modeller for anyone who wishes to look it up. 1 1 Link to post Share on other sites More sharing options...
Alcanman Posted December 7, 2023 Share Posted December 7, 2023 I remember seeing 'Cold Harbour Lane' at a local exhibition in the North East. One of his early forays into 7mm. As it featured some J27s, it very much reminded me of South Blyth shed. 1 Link to post Share on other sites More sharing options...
woodenhead Posted December 7, 2023 Share Posted December 7, 2023 4 hours ago, sb67 said: Must have missed that one! Did a search and apparently the track plan is very similar to this. Very intriguing, can't find any photo's but there was a thread on here on a layout based on the plan. https://www.rmweb.co.uk/forums/topic/81764-webb-lane/ He's been operating something similar to that recently as Lochty Lane in 7mm. Link to post Share on other sites More sharing options...
Peter Kazmierczak Posted December 7, 2023 Share Posted December 7, 2023 Am I missing something, but how is this plan workable? The only access to the yard that I can see is via a spur that is less than a point long; hardly enough for an 0-4-0 loco. 1 Link to post Share on other sites More sharing options...
Alcanman Posted December 7, 2023 Share Posted December 7, 2023 14 minutes ago, Peter Kazmierczak said: Am I missing something, but how is this plan workable? The only access to the yard that I can see is via a spur that is less than a point long; hardly enough for an 0-4-0 loco. On Ian 's latest version, 'Lochty Lane' the spur is long enough to take one loco. Locos are simply shuffled on and off the layout. Not one of my favourite Futers layouts. I prefer the 4mm version of 'Lochside' which started my interest in modern image modelling. 2 Link to post Share on other sites More sharing options...
woodenhead Posted December 7, 2023 Share Posted December 7, 2023 1 hour ago, Alcanman said: On Ian 's latest version, 'Lochty Lane' the spur is long enough to take one loco. Locos are simply shuffled on and off the layout. Not one of my favourite Futers layouts. I prefer the 4mm version of 'Lochside' which started my interest in modern image modelling. With his ability to spin up layouts I don't think he needs to worry about longevity of interest and it's a demonstration of 0 scale in a small space even though for many it would offer little interest. There was also recently the Lochty Branch in O which whilst still very simple I could watch for ages. 1 Link to post Share on other sites More sharing options...
RMweb Gold JohnR Posted December 7, 2023 RMweb Gold Share Posted December 7, 2023 Isnt it about time that say Peco did a special book with all of Ian's layouts in? After all, he seems to have been published most by them, they probably still have all the info. 2 Link to post Share on other sites More sharing options...
woodenhead Posted December 7, 2023 Share Posted December 7, 2023 He's probably not their biggest fan, I mean he only ever uses three points and a bit of streamline 🤣 6 Link to post Share on other sites More sharing options...
rob D2 Posted December 7, 2023 Share Posted December 7, 2023 2 hours ago, Alcanman said: On Ian 's latest version, 'Lochty Lane' the spur is long enough to take one loco. Locos are simply shuffled on and off the layout. Not one of my favourite Futers layouts. I prefer the 4mm version of 'Lochside' which started my interest in modern image modelling. Lochside was clearly very inspirational to a lot of us 1 5 Link to post Share on other sites More sharing options...
RMweb Premium 03060 Posted December 7, 2023 RMweb Premium Share Posted December 7, 2023 (edited) 11 hours ago, sb67 said: Must have missed that one! Did a search and apparently the track plan is very similar to this. Very intriguing, can't find any photo's but there was a thread on here on a layout based on the plan. https://www.rmweb.co.uk/forums/topic/81764-webb-lane/ I thought that this looked familiar, this is more or less the same trackplan as is used on Byway MPD built by John Gay and published at least a couple of times, most recently in Hornby Mag Oct '23. In 4mm he's fitted it into 4'6"x 1' and makes for a very nice layout on which to display a collection of locomotives. A much longer initial headshunt is used with a shorter one for access to the shed area. Regards, Ian. (A great fan of Ian Futer's layouts and articles.) Edited December 7, 2023 by 03060 Extra info added or corrected. 1 Link to post Share on other sites More sharing options...
RMweb Gold D9020 Nimbus Posted December 7, 2023 RMweb Gold Share Posted December 7, 2023 Ian has had books published by Santona — think they may have been taken over by Book Law. At a York show in the 2010s, there were mentions on his layout stand of forthcoming books on "Modelling the North Eastern Region" and "Modelling the West Highland line", but there's been no sign of them since. 1 Link to post Share on other sites More sharing options...
sb67 Posted December 7, 2023 Share Posted December 7, 2023 5 hours ago, Alcanman said: I prefer the 4mm version of 'Lochside' which started my interest in modern image modelling. Mine too! Especially the sight of weathered locomotives! 1 Link to post Share on other sites More sharing options...
Ben B Posted December 7, 2023 Share Posted December 7, 2023 On 03/10/2022 at 21:19, PMP said: Yep just three, I have cut two other points to make representations of catch points, but the 'operating' points are just the three you see in the image. Here's a YT video of the operation while under test, Just found this thread, and really like this trackplan and concept, I might have to try my own version of it. Have to say, watching the DMU's snake in and out in that vid is quite hypnotic :) 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP Posted December 7, 2023 RMweb Premium Share Posted December 7, 2023 46 minutes ago, Ben B said: Just found this thread, and really like this trackplan and concept, I might have to try my own version of it. Have to say, watching the DMU's snake in and out in that vid is quite hypnotic :) I was very pleasantly surprised by its operating potential. It’s currently on hold whilst I work on a very different style of presentation for it. Meanwhile I’ve returned to a Northumbrian project that I’ve had in mind for a long while which is influenced by Futers and Rice, but is a step away from their and my usual scales into N. 5 1 Link to post Share on other sites More sharing options...
4firstimes Posted January 9 Share Posted January 9 There is no Doubt Ian has demonstrated over the years layouts don’t have to be over complicated with points and large construction. Ian has over the years migrated the various scales and proved that interesting layouts can be built. Having spent ages observing him run Otterburn in 4mm scale , this still remains etched in my mind from the late 1970’s as a design with plenty of interest. Over the years Ian has produced several layouts including the venture into 7mm scale. I Seem to recall a 7mm version of Newcastle NB , this appeared in the late magazine of Model Railways Illustrated (MORIL) including an article on building 7mm rolling stock. If any followers have a copy of the article I would be interested in a copy off forum please. There is no doubt Ian has had a proliferation of layouts and many articles in the other magazines other than the Railway Modeller. With reductions in disposable income and the current costs of locomotives, be DCC or analogue, there appears to be a resurgence of simple layouts very much reflecting the experience Ian Futers has shared with the railway modelling community though the years. 1 4 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now