JaymzHatstand Posted Saturday at 08:24 Share Posted Saturday at 08:24 (edited) My 3D printed crew arrived the other day, and hopefully I'll have chance to fit them soon. I might make a little alteration to give the second man grey slip on shoes, as legend dictates all good thrash merchants wore! I do enjoy painting loco crews myself, and am in the long process of adding crews to all of my locos (mostly the superb ModelU products), but these colour prints are an excellent time saver, and beautifully detailed. I can thoroughly recommend them to anyone wishing to add a bit of life to their Ped! Cheers J Edited Saturday at 08:34 by JaymzHatstand Edited to add a couple of hasty phone photos! 4 1 Link to post Share on other sites More sharing options...
RMweb Gold Geep7 Posted Saturday at 08:31 RMweb Gold Share Posted Saturday at 08:31 9 hours ago, DIRTY DIESEL said: Not sure if it could be the same issue I have, but are your points Large radius points? Flange squeal won't work on Large Radius, but starts to work on Medium or Small radius points and on curves. Where's my class 37* will work on all points and curves, I've contacted AS support for them to look into it for me. *My 37 had to go back to AS to get the Flange Squeal to work when it first arrived. Ah, that could be it.... I do have large radius Y's and double-slips, and only 1 small radius point which I haven't tried it across yet. Plus, it's only a small layout, so perhaps I haven't got it to the right speed yet..... Not to worry, it's only a really minor thing, that i'm not totally worried about, on an absolutely outstanding model. Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted Saturday at 08:45 RMweb Gold Share Posted Saturday at 08:45 As for Charybdis, it will become 31459 as it looks close enough. I have the West Hill refurbished 31 kit on order and some transfers from Railtec. 4 Link to post Share on other sites More sharing options...
RMweb Gold Geep7 Posted Saturday at 08:52 RMweb Gold Share Posted Saturday at 08:52 3d printed crew fitted into the no.1 end of 5544. Just the icing on the cake. Fantastic. 9 1 1 Link to post Share on other sites More sharing options...
Tony Walker Posted Saturday at 09:14 Share Posted Saturday at 09:14 (edited) I have to agree with a few folk on here re the snow plough fitting on 31128. 90% of the photos I've look at on the internet show this loco fitted with snow ploughs, either the full set or just the outer ones. Plus, the location of the white pipes is above the yellow pipes and not next to them. So, after a bit of drilling and messing about I've managed to cram everything onto the buffer beam and the video below shows the set up. I haven't included the sound, as most folk on here have already heard it anyway. I've also compared the Accurascale 31 with the Bachmann 31, and they do appear spot on with all the various grilles, size shape etc., but the Accurascale 31 is much better modelled around the side cab windows in my opinion. Edited Saturday at 09:15 by Tony Walker 5 Link to post Share on other sites More sharing options...
RMweb Gold stovepipe Posted Saturday at 11:34 RMweb Gold Share Posted Saturday at 11:34 On 17/10/2024 at 23:45, Holls67 said: I went for this loco (as well as 402 and 409) as they were ER machines in Rail Blue TOPS. Although 248 in this condition is strictly speaking before my chosen era (1978-1984ish), the quirkiness of the tablet catcher recess sold it to me. Your timescale matches what I've managed to discover on t'interweb, but I'm still searching for an approx date for the plating work. Gotta love OCD 😊 The AS Class 31 is for me the best 4mm/OO example to date. Magnificent. Does this help? 248 ex-works in April 1976. Headcode still alphanumeric it seems. It's a great model, I'm very pleased with mine. 5 1 Link to post Share on other sites More sharing options...
Fire Queen Posted Saturday at 12:38 Share Posted Saturday at 12:38 3 hours ago, 97406 said: As for Charybdis, it will become 31459 as it looks close enough. I have the West Hill refurbished 31 kit on order and some transfers from Railtec. I'm personally contemplating on whether to get no: 31128 but have it resprayed into its former Railfreight Grey colour, which it carried before its withdrawal from BR/EWS service in the mid-1990s, but still however with its name "Charybdis", redone in red-backed BR-style nameplates! Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted Saturday at 12:46 RMweb Gold Share Posted Saturday at 12:46 2 minutes ago, Fire Queen said: I'm personally contemplating on whether to get no: 31128 but have it resprayed into its former Railfreight Grey colour, which it carried before its withdrawal from BR/EWS service in the mid-1990s, but still however with its name "Charybdis", redone in red-backed BR-style nameplates! I did think of that but I have the Railfreight Skinhead on order and I do want a blue refurbished example too. Link to post Share on other sites More sharing options...
classy52 Posted Saturday at 12:56 Share Posted Saturday at 12:56 19 hours ago, Darius43 said: I'll post this here in this thread. You do really good photo's of your loco's (Class 31's) on your very nice layout but the photo's clearly show there is something not right with the Bachmann Class 31 face compared to Accurascale, for me the difference is quite stark as you can see above. It's like the Bachmann 31 is looking sad or more squat and just doesn't look good with all honesty, personally I wouldn't be able to have the Bachmann 31 on the same layout alongside the Accurascale 31 which is damn spot on shape wise compared to the prototype. Like I said, your excellent photo's expose the Bachmann 31 not in a good way. Cheers Steve 2 3 Link to post Share on other sites More sharing options...
atom3624 Posted Saturday at 14:59 Share Posted Saturday at 14:59 On 18/10/2024 at 14:53, stovepipe said: I saw a video which said the Accurascale one was 454g for sound fitted. I haven't weighed my own... The 530g for the Bachmann locomotive sounds typical for them. 454g (1 lb) sounds very light for an A/scale locomotive!! If the overall package with giant box is just 700g, then I'd guess the locomotive is 550g + Being A/Scale tbh I was expecting closer to 600g. (I'm out of the country for a couple of weeks, whilst being advised mine is being sent / delivered!) Al. Link to post Share on other sites More sharing options...
RMweb Gold Roy Langridge Posted Saturday at 15:04 RMweb Gold Share Posted Saturday at 15:04 1 minute ago, atom3624 said: The 530g for the Bachmann locomotive sounds typical for them. 454g (1 lb) sounds very light for an A/scale locomotive!! If the overall package with giant box is just 700g, then I'd guess the locomotive is 550g + Being A/Scale tbh I was expecting closer to 600g. (I'm out of the country for a couple of weeks, whilst being advised mine is being sent / delivered!) Al. The 31 is much small than a Deltic or 37 and has the fan mechanism included. 454g does not sound unreasonable and is perfectly adequate. I am not one that subscribes to the “heavier is better” approach. As long as a loco can comfortably haul a prototypical train at a prototypical speed, the rest is unnecessary. Roy 2 7 Link to post Share on other sites More sharing options...
RMweb Gold stovepipe Posted Saturday at 15:07 RMweb Gold Share Posted Saturday at 15:07 7 minutes ago, atom3624 said: The 530g for the Bachmann locomotive sounds typical for them. 454g (1 lb) sounds very light for an A/scale locomotive!! If the overall package with giant box is just 700g, then I'd guess the locomotive is 550g + Being A/Scale tbh I was expecting closer to 600g. (I'm out of the country for a couple of weeks, whilst being advised mine is being sent / delivered!) Al. I've weighed mine (non-sound) - 441g. 2 Link to post Share on other sites More sharing options...
classy52 Posted Saturday at 15:12 Share Posted Saturday at 15:12 Just weighed my sound fitted 31, it came to 454g. 1 Link to post Share on other sites More sharing options...
RMweb Premium IOW O2 Posted Saturday at 15:17 RMweb Premium Share Posted Saturday at 15:17 (edited) My DC only comes in at 435g (two scales) seems lighter for size compared to 37 as it's not that much shorter. Also will add more weight over one end so will fill missing void as in pic below with some lead, v small flywheel. Edited Saturday at 15:18 by IOW O2 2 Link to post Share on other sites More sharing options...
RMweb Premium spamcan61 Posted Saturday at 15:21 RMweb Premium Share Posted Saturday at 15:21 15 minutes ago, Roy Langridge said: I am not one that subscribes to the “heavier is better” approach. As long as a loco can comfortably haul a prototypical train at a prototypical speed, the rest is unnecessary. Roy Absolutely, excessive weight gives the packaging more work to do and increases the risk of stalling leading to a motor burnout. 3 Link to post Share on other sites More sharing options...
RMweb Gold Roy Langridge Posted Saturday at 16:20 RMweb Gold Share Posted Saturday at 16:20 (edited) 1 hour ago, IOW O2 said: My DC only comes in at 435g (two scales) seems lighter for size compared to 37 as it's not that much shorter. Also will add more weight over one end so will fill missing void as in pic below with some lead, v small flywheel. But what do you hope to gain by adding more weight? Does an unmodified 31 not achieve something that you hoped it would? Extra unnecessary weight just stresses things, as my knees will testify! As an aside, a 31is about a scale 20mm shorter than a 37, which when considering the impact on the chassis block alone it is in the order of about 15% smaller. As for tractive effort, a real 37 has about 50% more than a 31. Now we have a fan mechanism as well, that weight sounds about right. Roy Edited Saturday at 16:21 by Roy Langridge 3 2 Link to post Share on other sites More sharing options...
RMweb Premium IOW O2 Posted Saturday at 16:22 RMweb Premium Share Posted Saturday at 16:22 Curiosity got the better, so I did an unscientific balancing test as in pics below. @ 80g lighter, least know what to add to balance out. Link to post Share on other sites More sharing options...
RMweb Premium IOW O2 Posted Saturday at 16:35 RMweb Premium Share Posted Saturday at 16:35 (edited) 15 minutes ago, Roy Langridge said: But what do you hope to gain by adding more weight? Does an unmodified 31 not achieve something that you hoped it would? Only that I weighed in after, the ACC deltic, Cav 56 and Bach current 47 and all within a couple of grams, so I thought may as well balance the 31. I do agree, my own experience is that weight for the most part makes no difference. Edited Saturday at 16:36 by IOW O2 Link to post Share on other sites More sharing options...
TomScrut Posted Saturday at 16:44 Share Posted Saturday at 16:44 1 hour ago, atom3624 said: The 530g for the Bachmann locomotive sounds typical for them. 454g (1 lb) sounds very light for an A/scale locomotive!! If the overall package with giant box is just 700g, then I'd guess the locomotive is 550g + Being A/Scale tbh I was expecting closer to 600g. (I'm out of the country for a couple of weeks, whilst being advised mine is being sent / delivered!) Al. Mine pulls 8 coaches no bother, so for me it doesn't need to be any heavier. 1 hour ago, Roy Langridge said: 454g does not sound unreasonable and is perfectly adequate. I am not one that subscribes to the “heavier is better” approach. As long as a loco can comfortably haul a prototypical train at a prototypical speed, the rest is unnecessary. Exactly! I don't see what the fuss is about. If it does what it needs to do then it's fine. The Bachmann 70 is the only loco I have ever had that I thought could do with being heavier to allow it to be better at its job. 2 Link to post Share on other sites More sharing options...
mikesndbs Posted Saturday at 17:29 Share Posted Saturday at 17:29 In this video, I review my very first Accurascale model – the BR Class 31. From a DC users point of view. We’ll dive into unboxing, discuss the model's stunning details, and tackle an issue with the roof fan during DC operation. I'll also show you a simple and effective fix for the fan that costs just 5p! From fine detailing to lighting, testing, join me as I give my honest opinion on this highly detailed locomotive. Is the complexity of modern DCC models leaving DC users behind? Let’s find out together. Don't miss the running session with real Class 31 sounds! Note I express my opinion as a DC user, this is not intended to inflame anyone just saying it as I see it. Check the video timecode index for details 6 1 1 Link to post Share on other sites More sharing options...
marshy Posted Saturday at 18:13 Share Posted Saturday at 18:13 The fan on my loco also makes this beautiful model sound like a pancake motored loco duly switched off for good 1 1 Link to post Share on other sites More sharing options...
atom3624 Posted Saturday at 18:39 Share Posted Saturday at 18:39 (edited) Talk about light the blue touch paper - wow !!! 🙃 I was curious as A/Scale locomotives do seem to be slightly heavier than 'other competitors' products' in general, hence why I asked the question. Many thanks for the replies, however opinionated (we all have them). The 31 was never a powerhouse - 'though upgrades to 1,600 hp may contradict that - so I do totally agree - good comment on the 'less chance of stalling'. The Bachmann Class 70 at 450g if I remember is definitely low, as this is a 'superpower' locomotive. Interesting discussion nevertheless. Al. Edited Saturday at 18:40 by atom3624 1 Link to post Share on other sites More sharing options...
RD400 Posted Saturday at 19:03 Share Posted Saturday at 19:03 My 5544 arrived great loco love the cold start I’ve remapped it using the loksound programmer to be same as the other engines I have 7 Link to post Share on other sites More sharing options...
JaymzHatstand Posted Saturday at 19:08 Share Posted Saturday at 19:08 I had the roof panel off this afternoon for a quick play with the Aux switches as I'm trying to get both tail lights on at the same time, if thats at all possible. I've got the sound version of 128, Chlamydia, for reference. If it's not possible, I certainly won't be complaining, I'm just curious more than anything! I'm thoroughly enjoying investigating everthing this loco has to offer, and it definitely won't be the last A/S loco I invest in! I just need a couple more NYMR relevant locos (55009 as first preserved would be an absolute clincher!) There are two or three others I've got my eye, but sadly not wallet at the moment on! I've not had chance to fit either the crew (though the second man now has a grey shoe(s)), or detail bits, but I'll get there, along with a touch of light weathering! Cheers J 1 Link to post Share on other sites More sharing options...
rob D2 Posted Saturday at 19:10 Share Posted Saturday at 19:10 1 minute ago, JaymzHatstand said: I had the roof panel off this afternoon for a quick play with the Aux switches as I'm trying to get both tail lights on at the same time, if thats at all possible. I've got the sound version of 128, Chlamydia, for reference. If it's not possible, I certainly won't be complaining, I'm just curious more than anything! I'm thoroughly enjoying investigating everthing this loco has to offer, and it definitely won't be the last A/S loco I invest in! I just need a couple more NYMR relevant locos (55009 as first preserved would be an absolute clincher!) There are two or three others I've got my eye, but sadly not wallet at the moment on! I've not had chance to fit either the crew (though the second man now has a grey shoe(s)), or detail bits, but I'll get there, along with a touch of light weathering! Cheers J Would a second man be allowed slipons ? Was there no requirement fur safety shoes back then Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now