Butler Posted January 9, 2022 Share Posted January 9, 2022 Hi I have just ordered a Bachmann LMS 10000, can anyone suggest a fairly low cost sound module, and point me towards a fitting guide. Can’t seem to find one. Thanks B Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted January 9, 2022 RMweb Gold Share Posted January 9, 2022 I put a class 50 Zimo in mine, edited out one of the air horns as the LMS twins only had one. Link to post Share on other sites More sharing options...
Lemmy282 Posted January 9, 2022 Share Posted January 9, 2022 For a cheaper alternative use a Hornby TTS class 40 Link to post Share on other sites More sharing options...
SRman Posted January 9, 2022 Share Posted January 9, 2022 (edited) I used some relatively cheap SoundTraxx Econami decoders with UK diesel sounds for both 10000 and 10001 (I also used one in my Heljan D0260 'Lion'). These decoders have a choice of engine sounds and horns, selectable by changing certain CV values. After experimenting a bit, I settled on the class 37 engine sounds, as the idle is rougher and the throttle-up is less controlled than the class 31 sounds also in there. These are both EE Co 12 cylinder sounds, but the Brush type 2 had a much more refined control system, whereas my observational experience with early EE locomotives is that the control was very coarse, with the engines revving up rapidly (even violently - thrashing in the truest sense of the word) then dying back while trying to start off, then repeating the process until they could take up full power. That was with some early Queensland railways locomotives from the early to mid 1950s with the 12 cyl. engines, so appropriate for the period we want. The class 37 sounds just seemed a little more appropriate to my mind. I can't remember which horns I chose, off-hand. Edited January 9, 2022 by SRman Link to post Share on other sites More sharing options...
Butler Posted January 10, 2022 Author Share Posted January 10, 2022 Thank you all, food for thought. would I be right in saying the TTS would have an 8 pin connector, and the 10000 a 21 pin, so an adaptor needed? Prob got one somewhere. What about a fitting guide, does the body come off easily? B Link to post Share on other sites More sharing options...
Butler Posted January 10, 2022 Author Share Posted January 10, 2022 Having said that, it would appear the TTS class 40 sound is not available, tried everywhere. B Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now