RMweb Gold Roy Langridge Posted November 16, 2021 RMweb Gold Share Posted November 16, 2021 Have you tested how your magnetic couplings behave when moving over kadee uncoupling magnets? Thanks, Roy Link to post Share on other sites More sharing options...
Accurascale staff McC Posted November 16, 2021 Accurascale staff Share Posted November 16, 2021 17 minutes ago, Roy Langridge said: Have you tested how your magnetic couplings behave when moving over kadee uncoupling magnets? Thanks, Roy Yes, they are pretty much not effected. 1 1 Link to post Share on other sites More sharing options...
phil gollin Posted November 17, 2021 Share Posted November 17, 2021 . For uncoupling look up "reverse action tweezers" . 2 Link to post Share on other sites More sharing options...
No Decorum Posted November 17, 2021 Share Posted November 17, 2021 Old tension locks are large and ugly but they work, by and large. By starting to reduce them in size, manufacturers opened a can of worms. The new versions are much more discrete but fail to couple on tighter curves. In order to cope with being hauled on tight curves, long vehicles are usually fitted with complicated (and therefore expensive) methods which allow the coupling pocket to deflect. This in turn makes propelling vehicles accident prone. Matters are made worse by some manufacturers providing NEM pockets which droop, are incorrectly positioned or fit fishtails sloppily. Where possible, I fit Bachmann short straight couplings, which are less ugly than Hornby ones, to the latter’s models and check whether other manufacturers’ offerings seem to need replacement. For fixed rakes, I use Kadees. Their great virtue is that the fishtail ones are available in four lengths, so that I can couple vehicles as closely as will work. My Hand of God lacks the omnipotence of the prototype and cannot extend to all parts of my layout from where I sit. Fortunately, there is no-one but myself to get upset by my tension locks. It is amazing what one can become accustomed to. Not everyone fits drivers or covers plastic coal with real coal. Not everyone fills coaches with people and some people fit loads to all open wagons. What is the worst compromise? Not in my view the track but model people. 3 Link to post Share on other sites More sharing options...
Accurascale staff Accurascale Fran Posted November 25, 2021 Author Accurascale staff Share Posted November 25, 2021 Hi everyone, Great news! Our little chaldrons have now entered production and on course for delivery in Q2 2022. Cheers! Fran 12 Link to post Share on other sites More sharing options...
Bishdurham Posted February 18, 2022 Share Posted February 18, 2022 Nice to see the post on FB showing the chaldrons in production. Do you plan to have coal loads for them? 1 Link to post Share on other sites More sharing options...
Accurascale staff Accurascale Fran Posted February 19, 2022 Author Accurascale staff Share Posted February 19, 2022 14 hours ago, Bishdurham said: Nice to see the post on FB showing the chaldrons in production. Do you plan to have coal loads for them? Hi @Bishdurham, We do indeed. We have a sample in hand which we will have at our stand at Glasgow next weekend. It’s packed up with the stand so will try to get photos of it next weekend. Cheers! Fran 2 Link to post Share on other sites More sharing options...
Bishdurham Posted February 19, 2022 Share Posted February 19, 2022 2 hours ago, Accurascale Fran said: Hi @Bishdurham, We do indeed. We have a sample in hand which we will have at our stand at Glasgow next weekend. It’s packed up with the stand so will try to get photos of it next weekend. Cheers! Fran Thanks Fran! Will look forward to seeing them. Link to post Share on other sites More sharing options...
Bomp Posted March 17, 2022 Share Posted March 17, 2022 I’ve just ordered some of these. They’ll go really well with my Coal Sector 60. 7 1 Link to post Share on other sites More sharing options...
Bishdurham Posted March 17, 2022 Share Posted March 17, 2022 2 hours ago, Bomp said: I’ve just ordered some of these. They’ll go really well with my Coal Sector 60. Don't forget any more than three wagons and you will need a second 60! 1 4 Link to post Share on other sites More sharing options...
Bomp Posted March 17, 2022 Share Posted March 17, 2022 I got one when a well known retailer did their offer recently! All sorted now. 1 Link to post Share on other sites More sharing options...
Floreat Industria Posted April 24, 2022 Share Posted April 24, 2022 On 27/10/2021 at 19:10, Roy Langridge said: But there was nothing to stop the chains being used to keep the brakes off on x of the wagons whilst men sat on y wagons applying the brakes. Just because they all had brakes, doesn't mean they all had to be manually operated on a train. Roy For downhill braking, the video in an earlier post is excellent, at 9.38 (1) Seaham Harbour Coal derails, runaways, gravity & steam shunts 1963 - YouTube Link to post Share on other sites More sharing options...
RMweb Premium ERIC ALLTORQUE Posted May 21, 2022 RMweb Premium Share Posted May 21, 2022 Heres the real thing,we had so many in the north we park them on footpaths for litter bins. 9 Link to post Share on other sites More sharing options...
RMweb Gold Ruston Posted May 22, 2022 RMweb Gold Share Posted May 22, 2022 These must be due now? On 18/02/2022 at 22:46, Bishdurham said: Nice to see the post on FB showing the chaldrons in production. Do you plan to have coal loads for them? I never understand people wanting plastic pretend coal loads when they can easily make loads themselves and use the real thing. But I forget that not everyone can still just pick the stuff up anywhere. You can walk your dog just about anywhere round here, on old pit sites and colliery railway lines, and find enough coal lying around to make wagon loads. Not that I need to because I've got an ice cream tub full of Beeston seam coal, from the last deep mine in Yorkshire. I am thinking that my new micro layout will use my order of chaldrons but for fireclay and not coal. The Leeds Fireclay Co, in the 1950s, with wagons that look like they could be from the 1850s. 12 1 Link to post Share on other sites More sharing options...
Ian_B Posted May 22, 2022 Share Posted May 22, 2022 2 hours ago, Ruston said: These must be due now? I never understand people wanting plastic pretend coal loads when they can easily make loads themselves and use the real thing. But I forget that not everyone can still just pick the stuff up anywhere. You can walk your dog just about anywhere round here, on old pit sites and colliery railway lines, and find enough coal lying around to make wagon loads. Not that I need to because I've got an ice cream tub full of Beeston seam coal, from the last deep mine in Yorkshire. I am thinking that my new micro layout will use my order of chaldrons but for fireclay and not coal. The Leeds Fireclay Co, in the 1950s, with wagons that look like they could be from the 1850s. were the twin height buffers a common Mod? the RH buffers appears to be a different shape to the others. Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted May 22, 2022 RMweb Gold Share Posted May 22, 2022 1 hour ago, Ian_B said: were the twin height buffers a common Mod? the RH buffers appears to be a different shape to the others. Pretty sure some of the locos at the various London Docks had two sets. Link to post Share on other sites More sharing options...
Bishdurham Posted May 22, 2022 Share Posted May 22, 2022 3 hours ago, Ruston said: These must be due now? I never understand people wanting plastic pretend coal loads when they can easily make loads themselves and use the real thing. But I forget that not everyone can still just pick the stuff up anywhere. You can walk your dog just about anywhere round here, on old pit sites and colliery railway lines, and find enough coal lying around to make wagon loads. Not that I need to because I've got an ice cream tub full of Beeston seam coal, from the last deep mine in Yorkshire. I am thinking that my new micro layout will use my order of chaldrons but for fireclay and not coal. The Leeds Fireclay Co, in the 1950s, with wagons that look like they could be from the 1850s. You have probably never seen an Accurscale coal load. I don't think my skills are good enough to get close and for the price I think they are hard to beat. As in the UK, Nova Scotia has coal deposits that our governments refuse to use so that their populations can pay higher fuel bills. Unfortunately my local line was used for gypsum, so if you require any gypsum let me know and I will do a trade for coal! Link to post Share on other sites More sharing options...
RMweb Gold Ruston Posted May 22, 2022 RMweb Gold Share Posted May 22, 2022 1 hour ago, Ian_B said: were the twin height buffers a common Mod? the RH buffers appears to be a different shape to the others. Most of the industrial engines in the North East had blocks of wood that extended down from the buffer beams. The Kitson long-boiler engines were an exception and had an extra set of 'normal' buffers but what the arrangements were for the North Eastern Railway engines I couldn't say. I'm sure someone on here will know - @Worsdell forever? An extra set of normal buffers seems to have been used in various iron and steel works, but presumably for wagons other than chaldrons. Many industrial engines had large dumb buffers that could cope with tight curves and a variety of buffing heights and spacing. Link to post Share on other sites More sharing options...
RMweb Gold Ruston Posted May 22, 2022 RMweb Gold Share Posted May 22, 2022 3 hours ago, Bishdurham said: You have probably never seen an Accurscale coal load. I don't think my skills are good enough to get close and for the price I think they are hard to beat. I must admit that I haven't but then nothing looks more like coal than coal. Cut a rectangle of card, pour on some coal and drip PVA on. Leave to set. Glue some small rectangles to the underside to bring the coal up to the correct level in the wagon and that's all there is to it. It doesn't take a great deal of skill to do and all for the best Yorkshire price of nowt. 4 1 Link to post Share on other sites More sharing options...
Accurascale staff McC Posted May 22, 2022 Accurascale staff Share Posted May 22, 2022 2 minutes ago, Ruston said: I must admit that I haven't but then nothing looks more like coal than coal. we agree. It’s why all of our loads are made using real coal, aggregates, etc and are hand finished. 4 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Ruston Posted May 22, 2022 RMweb Gold Share Posted May 22, 2022 Just now, McC said: we agree. It’s why all of our loads are made using real coal, aggregates, etc and are hand finished. Fair enough. 1 Link to post Share on other sites More sharing options...
Accurascale staff Accurascale Fran Posted May 23, 2022 Author Accurascale staff Share Posted May 23, 2022 Hi everyone, Production is almost complete on these and they are due to leave China within the next couple of weeks. We'll update you on here when they depart for a more firm arrival time, but looking late July ATM. Cheers! Fran 1 4 Link to post Share on other sites More sharing options...
mozzer models Posted July 3, 2022 Share Posted July 3, 2022 New update had a email to say the Chaldrons are now on there way & at sea Due Mid August 3 1 Link to post Share on other sites More sharing options...
Bishdurham Posted August 25, 2022 Share Posted August 25, 2022 Are they here yet??? What happened to the coal loads, has the UK run out of coal? 1 Link to post Share on other sites More sharing options...
Accurascale staff Accurascale Fran Posted August 25, 2022 Author Accurascale staff Share Posted August 25, 2022 Hi @Bishdurham, We had word that the ship was delayed a week in Spain (bet the crew had fun!) and it will now dock on the 31st. Coal loads to follow at a later date. Cheers! Fran 1 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now