Schooner Posted November 22, 2022 Author Share Posted November 22, 2022 #13-19 ✅... ...showing some evidence of my running battle with T.B. Wild Esq. Still, it's done and nothing that can't be tidied up at some point. The little lugs in the axleguards are locating tabs which fit slots in the floor, which were previously hidden to my casual glance by patina and shadow (and, in one case, glue). Iron looks like it's being held up to the camera but is resting on the solebar...not the most delicate bit of kit. The unit itself is one of those £20 variable temperature jobbies that absolutely nobody recommends. This sort of carry-on... ...but a generation or two older. I can't recomment it either...but it's fine, and it was cheap! Though if more brass kits are in my future, then I really must get some new and finer tips. Annnnyway, on to important stuff. 7 hours ago, IanM78 said: The actual crane at Cirencester Wharf was an interesting design. This is excellent! A bit much for layout, sadly, but what a beast babe beauty! I'd love to know more about it, and like Wolfie would've loved to have seen it in action. Do you have any more info? Google pickings are pretty sparse at first look. Re the Ingleford* brace**, thanks for crane input all. Updates to follow as and when for further comment and review. All much appreciated. *I've been using the name every post to try to get used to it. Haven't. Alternative names for the layout invited :) ** Quite apart from meaning two, 'brace' would make for a decent collective noun. For the bird it's 'herd' or 'sedge', apparently, in case anyone else wondered. 2 hours ago, Annie said: How often do you see details like that on a model railway. A lot more frequently now @KNP's shown us the way: (Pic from the ever-exquisite, ever-inspirational Little Muddle) Cheers and gone! 11 1 1 Link to post Share on other sites More sharing options...
RMweb Premium magmouse Posted November 22, 2022 RMweb Premium Share Posted November 22, 2022 I saw this today and thought of you... (At the Royal College of Obstetricians and Gynaecologists - not my line of business, but they rent out meeting rooms and I had a meeting there. These hoists are high up in what is now an atrium, but used to be the 4th floor or so of a warehouse, near London Bridge) Nick. 5 5 Link to post Share on other sites More sharing options...
RMweb Premium Annie Posted November 22, 2022 RMweb Premium Share Posted November 22, 2022 33 minutes ago, Schooner said: A lot more frequently now @KNP's shown us the way: Oh that little cottage and its surroundings is absolutely lovely. Beautiful model making. 6 Link to post Share on other sites More sharing options...
WFPettigrew Posted November 23, 2022 Share Posted November 23, 2022 10 hours ago, magmouse said: Royal College of Obstetricians and Gynaecologists What on EARTH did they use those for?!?!?!?! 1 1 5 Link to post Share on other sites More sharing options...
IanM78 Posted November 23, 2022 Share Posted November 23, 2022 11 hours ago, Schooner said: This is excellent! A bit much for layout, sadly, but what a beast babe beauty! I'd love to know more about it, and like Wolfie would've loved to have seen it in action. Do you have any more info? Google pickings are pretty sparse at first look. I'll have to look through my books on the canal and see if there's anything else I can find on it. I'm sure I've seen a drawing of it somewhere but may be mistaken. The Stroudwater and Thames & Severn canals (now known as the Cotswold Canals) are a bit of a passion of mine. I've been following your topic for a while now and really didn't want my first post on a railway modeling forum to be canal related but couldn't resist! 1 Link to post Share on other sites More sharing options...
IanM78 Posted November 23, 2022 Share Posted November 23, 2022 On 22/11/2022 at 08:59, MrWolf said: I was a part of the discussion on Warren branch when the goods shed crane was being discussed, particularly about how the real thing operates. I did provide a number of pictures and diagrams, including a sketch of how the drive rope is rigged with a double pass over the drum in some cases, both ends being secured to the bottom drum, rather than one end to the pulley. To be honest I didn't spot that your model has a lower drive to the large pulley, there being a horse in the way. There certainly are lightweight cranes operated from a loop chain in the same way as a chain block, but in the case of your crane, no. The canal crane is built in such a way that all of the gearing is at ground level,as is the actual lift drum. What you have has a separate lift drum at the top, driven and geared down by a second drum at ground level, so the large pulley is part of the equation of the gearing. I don't think that it will look out of place at all once painted and detailed as you say, the black paint makes it stand out too much. 5 1 3 Link to post Share on other sites More sharing options...
Schooner Posted November 23, 2022 Author Share Posted November 23, 2022 (edited) 16 hours ago, magmouse said: I saw this today and thought of you... I'm touched! Nice shot, great hoists - presumably the back wall of the hop warehouse(s), which used to open on to the delivery yard? London-centric ideas are still being worked on in the background btw, so this is really very helpful, thank you. Speaking of very helpful, @IanM78 that's brilliant! Did I hear right that it's the only operationally-restored crane of its type? Annoyingly, check out the size of (what I've previously called) the head stays...! I'm very glad you chose to break cover, please always feel free to mention anything you think is relevant [EDIT: or, indeed irrelevant as long as it's interesting], railway or canal or whatever. I'm not very good at posting about railways either... :) On which, I'm sure I'm not alone in being interested in more info on the Cirencester crane, but it's only for curiosity's sake so please don't go to any trouble especially. I don't suppose you've come across the Midland Railway's idea of buying the canal, draining it - well, neglecting to interfere with the canal's habit of draining itself - and running tracks along it instead? I think it was in the 1860s, designed to challenge the GWR's route from Gloucester via Stroud, and I'm sure I've seen a preliminary survey done for the MR. An interesting little what-if... Anyway, welcome! Breaking* Heaps exciting! *So to speak Olds News The package from 5&9 may or may not have contained more than a pair of gates. Edited November 23, 2022 by Schooner 16 1 Link to post Share on other sites More sharing options...
MrWolf Posted November 23, 2022 Share Posted November 23, 2022 5 hours ago, IanM78 said: That explains it better than I could, it's really impressive to see one of the simple type restored and actually being used. I know of at least three around here but they've all been bolted or welded to stop anyone trying to use them. 1 Link to post Share on other sites More sharing options...
Popular Post Schooner Posted November 23, 2022 Author Popular Post Share Posted November 23, 2022 20 ✅...38✅ Both are brake connecting bars, I guess one was subject to revision, and fitting of the rocking axle guard...after which obviously the wheels went in for a quick play test I've been using the remaining photos in @ADK92 's Workbench thread to help me along, for which I've been grateful and from which this interesting size comparison... ...which goes to show just how smaller the earlier stock is! A long way to go still, but at least it's now officially rolling stock :) 15 4 2 Link to post Share on other sites More sharing options...
RMweb Premium figworthy Posted November 23, 2022 RMweb Premium Share Posted November 23, 2022 11 hours ago, IanM78 said: Thanks. It's a pity that they don't say where it is. It looks like an interesting set up. Adrian Link to post Share on other sites More sharing options...
IanM78 Posted November 23, 2022 Share Posted November 23, 2022 2 hours ago, figworthy said: Thanks. It's a pity that they don't say where it is. It looks like an interesting set up. Adrian It’s in Stone, Staffordshire. 2 1 1 Link to post Share on other sites More sharing options...
RMweb Premium figworthy Posted November 24, 2022 RMweb Premium Share Posted November 24, 2022 20 hours ago, IanM78 said: It’s in Stone, Staffordshire. Thanks I thought the mile post in the background looked a bit Trent & Mersey, but I couldn't get a close enough look. Adrian Link to post Share on other sites More sharing options...
Popular Post Schooner Posted November 25, 2022 Author Popular Post Share Posted November 25, 2022 (edited) #21-28 ✅ The language does not exist* to describe the total and utter pain** the final piece of the underframe detail was to fit. There's a reason the handbrake stirrup looks like it's been hanging out in Bakhmut. No need to go through it, suffice to say that one item took over an hour to get from fret to underframe. There's quite a lot of fettling and fairing to do on most of the bits but that's no longer a job for tonight***. On which, night all! EDIT: I should balance the above by saying how pleasantly surprised I am it's come together at all! A long way from perfect, but alright for a first attempt by the standards I set myself. More underframe junk than I thought attainable, and it runs. That'll do for now :) *It absolutely does - I used a goodly amount of it just now - but what the auto censor didn't catch the moderators would. **Literal *Or tomorrow. Sides on. I've earned it! Edited November 25, 2022 by Schooner Positivity, positivity forev-ah 12 2 2 5 Link to post Share on other sites More sharing options...
MrWolf Posted November 25, 2022 Share Posted November 25, 2022 That's an awful lot of brake gear you've managed to cram in there and as we are looking at it on screens it's easy to forget how small everything is. Top job. Just remember that it's not bad language. It's Task Appropriate Profanity. 9 Link to post Share on other sites More sharing options...
Schooner Posted November 25, 2022 Author Share Posted November 25, 2022 4 minutes ago, MrWolf said: It's Task Appropriate Profanity. Very much this. Combining the two comments, it struck me that never before have I sworn so vehemently at something so small. In terms of Profanity per Gram* it's probably the most densly verbally abused object I've ever done battle with. Not sure what that really says about it or me, but there we are. *Other scales are available 7 Link to post Share on other sites More sharing options...
RMweb Gold lezz01 Posted November 25, 2022 RMweb Gold Share Posted November 25, 2022 The auto sensor is a real pain it won't let me post the name of my cats breed. Ho hum! Regards Lez. 1 1 Link to post Share on other sites More sharing options...
MrWolf Posted November 25, 2022 Share Posted November 25, 2022 About eighty years ago, my grandmother had one of those cats the auto sensor would delete. It had the same name as Guy Gibson's dog... 2 1 Link to post Share on other sites More sharing options...
MrWolf Posted November 25, 2022 Share Posted November 25, 2022 It probably says that the model is somewhat intricate but your determination is greater. I struggle to hold parts that small steady for long enough. I'm okay with electronic components but tiny bits of brass, they're a problem. The brake shoes on my AA16 are going to be fun! 2 Link to post Share on other sites More sharing options...
Schooner Posted November 25, 2022 Author Share Posted November 25, 2022 (edited) Not too bad if you're happy to stick with those provided with the kit: Given the work you've had to do to get a functional kit (/functional AA16) out of what was in the bag, I'd say the hardest is behind you :) Edited November 25, 2022 by Schooner The pic also shows a warning to fit the tiesbars properly so they don't cant the rocking axle over to one side permanently... 6 1 3 Link to post Share on other sites More sharing options...
MrWolf Posted November 25, 2022 Share Posted November 25, 2022 That's a useful shot I'm not aiming to build a compensated chassis, as I'm running on fairly coarse OO track, but I will be using the brass etches to convert it into post great war condition with clasp brakes, so a little more hacking about of the brake gear is called for. I may have to use about a month's ration of ****s and ****s... 4 2 Link to post Share on other sites More sharing options...
WFPettigrew Posted November 25, 2022 Share Posted November 25, 2022 8 hours ago, Schooner said: it runs Well done. I was a bit concerned looking at this that you wouldn't be able to get the wheels back in.. Link to post Share on other sites More sharing options...
Popular Post Schooner Posted November 25, 2022 Author Popular Post Share Posted November 25, 2022 12 hours ago, WFPettigrew said: I was a bit concerned looking at this that you wouldn't be able to get the wheels back in.. I couldn't :) Had to disconnect the brake rods! But it was, at that point, the sweetest-running bit of stock I own - super smooth, super free. Genuine surprise! A bit of 'just do it then it's done' this morning, and a scrub up, got us here... ...in the arvo, and then here... ...in the evening. Roof loose; don't mention the axleboxes. I'll look at them again tomo. Strapping out of true from distortion whilst still on the fret, Frame damage represents a Valuable Learning Opportunity. Didn't find a good reference for the pipes, so they're just stuck on halfway between coupling and safety chain fittings. What else? All comments, criticism and cock-up identification cordially invited. Might be your last chance...! Cheers all, happy Friday! 20 Link to post Share on other sites More sharing options...
RMweb Gold Mikkel Posted November 26, 2022 RMweb Gold Share Posted November 26, 2022 Very nice. I do like horseboxes. Although looking at that last photo where it mixes with the riff-raff, it strikes me that horseboxes are the petty bourgeoisie of rolling stock. 🙂 You asked for comments. The paintwork looks a little stippled in the close-ups, which may not be a problem at normal viewing distances, but I've noticed you like close-ups. I wonder if the paintwork would benefit from rubbing down and giving it another go? I take absolutely no responsibility, just a thought! 2 Link to post Share on other sites More sharing options...
Schooner Posted November 27, 2022 Author Share Posted November 27, 2022 On 26/11/2022 at 06:37, Mikkel said: ...it strikes me that horseboxes are the petty bourgeoisie of rolling stock. Highbrow. It was a bit of a surprise to see how big it looks in this context, having seen it dwarfed by almost everything on layouts set post-1900, let alone post-Grouping! On 26/11/2022 at 06:37, Mikkel said: I wonder if the paintwork would benefit from rubbing down and giving it another go? Agreed. Possible reasons for this: black spray primer applied over the top of grey spray primer from the very end of the rattle can, so itself an uneven coat dirty nozzle cold too much for a dusting, but not enough coats for complete coverage. ...all of which can be mitigated/improved. I just wanted to get the bulk of it covered and sealed, knowing I'd be taking a bit of a break over the weekend and next week, but agree it would benefit from a better primer coat (rattle can) to support a better topcoat (brushed). Any other tips most welcome! I'd quite like the N6 to look a bit sexier than the Siphon, despite nominally being the same base livery. Looking at that photo, coach brown and black ironwork w/ satin varnish over matt black frames and undergubbins. Shy of any good references for lining, that'll be enough to mark it out as a bit special for now. On 26/11/2022 at 06:37, Mikkel said: I've noticed you like close-ups I'm not sure "like" is quite right! They're highly effective at showing up areas of improvement, so are useful...but they're definitely not flattering! I'll be leaving the N6 alone for now. I need to have a clear up of the bench, do some more on the layout itself, finish the 'box and the brake van, and get ready for a painting session... Not my favourite, but there's only one way to get better, and it'd be nice to start moving at least some items past the "Meh, maybe 70% finished" stage. For today, a nice little diversion: Safe as 'ouses! For reference, these are Intentio Supers (670mm). For my purposes Larges (500mm) will be fine, but I wanted to make sure the system is overspec for safety's sake. So far, so good... 9 1 4 Link to post Share on other sites More sharing options...
RMweb Gold Mikkel Posted November 27, 2022 RMweb Gold Share Posted November 27, 2022 More interesting stuff! Those cassettes look good, thanks for the tip. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now