Free At Last Posted October 30, 2023 Share Posted October 30, 2023 14 minutes ago, Harlequin said: That's just the normal driving simulation, isn't it? When you close the regulator the loco "coasts" or "drifts" and you should be able to hear the underlying clunking and the vacuum pump sounds. Then just lift the regulator and she'll start chuffing again - I hope. Would it coast forever? None of my other sound locos do it, when they reach the slower speed setting the exhaust beats pick up again. Link to post Share on other sites More sharing options...
RMweb Gold Harlequin Posted October 30, 2023 RMweb Gold Share Posted October 30, 2023 1 hour ago, Free At Last said: Would it coast forever? None of my other sound locos do it, when they reach the slower speed setting the exhaust beats pick up again. This project coasts forever. The Locoman King project works in the same way (at least, mine does). Personally I quite like it but the traditional pick up of the chuff at the lower speed also makes sense. 1 Link to post Share on other sites More sharing options...
RMweb Premium ERIC ALLTORQUE Posted October 30, 2023 RMweb Premium Share Posted October 30, 2023 15 minutes ago, Harlequin said: traditional pick up of the chuff Sounds like your well chuffed......:) 1 3 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted October 30, 2023 RMweb Premium Share Posted October 30, 2023 On 29/10/2023 at 14:30, cctransuk said: I shan't bother, thanks. I strongly suspect that a little lubrication, and some more running-in, will mitigate the sound - but I am more than happy with the model as it is. I mentioned the whine only because a couple of other posts mentioned it - but it is not a significant problem for me. Congratulations on an excellent model! John Isherwood. More work on 7810 today. Oiled the mechanism - sparingly; fitted Hornby Dublo / Peco Simplex couplings; fitted the prototypical coupling hooks - without the screw links; fitted the fire-iron rack; fitted the coal board; fitted the etched number and nameplates; coaled the tender. Runs somewhat quieter now, and I am sure that this will improve further with more running. Still VERY happy with this model. CJI. 6 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted October 30, 2023 RMweb Gold Share Posted October 30, 2023 On 26/10/2023 at 19:19, exmoordave said: I receieved my "Erlestoke Manor" several days ago, but have mixed feelings I'm afraid. Visually it is a lovely loco and am very impressed with it. Running-wise however, not so much. Although once it's running it is smooth enough, the starting/stopping is not so good. For the price paid I expect a slow smooth start and not a sudden movement into life, which is something I am particularly attuned to. I have run it on my rolling road for 30/40 minutes each way, but it shows no sign of improvement. I have had much better "out of the box" running from both Hornby & Bachmann locos, but my expectations from Accurascale were certainly as high as my other recent purchases from both of those companies. Does anyone have any similar experiences with these Manors or indeed the Dapol examples? I do not think it is too much to ask that the running is of the highest quality, considering the price asked. Hi Dave - I tried my Manor (DC only) on non-feedback (Gaugemaster), partial-feedback (AMR slow speed hand-held) and full feedback (Gaugemaster). I could not get smooth running at slow speeds on any of my controllers. I ran the model in for more than 8 hours on a circuit of track, stopping to turn the loco round periodically and also changing the direction. This made no difference to the poor running qualities. In the end, I had to return it to the retailer. I will not be getting another. I still have high hopes for future Accurascale steam releases, however. 4 5 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted October 30, 2023 RMweb Premium Share Posted October 30, 2023 (edited) 33 minutes ago, Captain Kernow said: Hi Dave - I tried my Manor (DC only) on non-feedback (Gaugemaster), partial-feedback (AMR slow speed hand-held) and full feedback (Gaugemaster). I could not get smooth running at slow speeds on any of my controllers. I ran the model in for more than 8 hours on a circuit of track, stopping to turn the loco round periodically and also changing the direction. This made no difference to the poor running qualities. In the end, I had to return it to the retailer. I will not be getting another. I still have high hopes for future Accurascale steam releases, however. My controllers are DIY lash-ups, based on super-cheap Aliexpress variable voltage regulators - and running of 7810 at all speeds is good. CJI. Edited October 30, 2023 by cctransuk 1 1 1 Link to post Share on other sites More sharing options...
Accurascale staff McC Posted October 30, 2023 Accurascale staff Share Posted October 30, 2023 2 hours ago, Captain Kernow said: Hi Dave - I tried my Manor (DC only) on non-feedback (Gaugemaster), partial-feedback (AMR slow speed hand-held) and full feedback (Gaugemaster). I could not get smooth running at slow speeds on any of my controllers. I ran the model in for more than 8 hours on a circuit of track, stopping to turn the loco round periodically and also changing the direction. This made no difference to the poor running qualities. In the end, I had to return it to the retailer. I will not be getting another. I still have high hopes for future Accurascale steam releases, however. If it doesn’t run right return for replacement. Unless you’re happy to miss out. 1 Link to post Share on other sites More sharing options...
SulzerPeak Posted October 30, 2023 Share Posted October 30, 2023 Ive found that the couple of problems with accurascale products have been rapidly replied to when i have emailed them and very well dealt with. 2 1 Link to post Share on other sites More sharing options...
AndrewB7585 Posted October 31, 2023 Share Posted October 31, 2023 (edited) 17 hours ago, Free At Last said: Would it coast forever? None of my other sound locos do it, when they reach the slower speed setting the exhaust beats pick up again. In real life trains have very low rolling resistance and will coast a very long way. On one of the routes I drive I cut off power at 80mph for a station that’s four miles away and even then I’ve used quite a bit of braking to slow it down. Power is basically only used to get up to speed or climb hills. After that there’s a lot of coasting Edited October 31, 2023 by AndrewB7585 Spelling 4 5 Link to post Share on other sites More sharing options...
RMweb Premium Eddie the dog Posted October 31, 2023 RMweb Premium Share Posted October 31, 2023 Hi all, Can I ask should the gear train need lubricating whether you would recommend oil or grease please ? I generally use Labelle 106 (grease) & 107 (oil). Thanks. 1 Link to post Share on other sites More sharing options...
RMweb Premium IOW O2 Posted October 31, 2023 RMweb Premium Share Posted October 31, 2023 (edited) On 27/10/2023 at 10:13, St Enodoc said: Seriously? Yes. On 27/10/2023 at 10:34, Nick C said: That doesn't excuse them from the Consumer Rights Act. Sorry missed these, no but it's a right palava, now if it was £500.... . I think perhaps as mine was a replacement for one they tested that was DOA, and the fact they would have to refund as they had no more stock is the reason. Shame as I use them a bit if my nearest M R shop does not have stock of any particular item (and that's a 55ml round trip) and they don't do Accu locos. Edited October 31, 2023 by IOW O2 correction Link to post Share on other sites More sharing options...
PeterH Posted November 1, 2023 Share Posted November 1, 2023 Finally received my two Manors from Accurascale…and they don’t fit through my platforms 🤣 bit of track relaying required! 2 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted November 1, 2023 RMweb Premium Share Posted November 1, 2023 1 minute ago, PeterH said: Finally received my two Manors from Accurascale…and they don’t fit through my platforms 🤣 bit of track relaying required! Yea! Prototypical though but quite rare. Phil 1 Link to post Share on other sites More sharing options...
PeterH Posted November 1, 2023 Share Posted November 1, 2023 Typical western engines! They are however very lovely models and well worth the wait, even if they are on the portly side! 1 Link to post Share on other sites More sharing options...
disco1974 Posted November 1, 2023 Share Posted November 1, 2023 My two remaining Manors of my order arrived today as well. The warehouse must be flat out with all the products that have arrived!! 2 Link to post Share on other sites More sharing options...
RMweb Gold Limpley Stoker Posted November 2, 2023 RMweb Gold Share Posted November 2, 2023 14 hours ago, PeterH said: Finally received my two Manors from Accurascale…and they don’t fit through my platforms 🤣 bit of track relaying required! That’s interesting- I haven’t run mine through my Limpley Stoke platforms - but I’m expecting a rebuild for when the Kernow Steam Railmotor arrives - the Dean bogie suspension looks as though it will need even more clearance than the Manor cylinders. 1 Link to post Share on other sites More sharing options...
Miss Prism Posted November 2, 2023 Share Posted November 2, 2023 A Manor should be 8'11" over cylinders - call it a round 36mm in 4mm scale. 1 1 2 Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted November 2, 2023 RMweb Gold Share Posted November 2, 2023 1 hour ago, Miss Prism said: A Manor should be 8'11" over cylinders - call it a round 36mm in 4mm scale. To be horribly precise it is 8ft 11 & 1/8th" over the cladding according to the Swindon drawing. Interesting to note that it is right on the maximum permissible width at that height above rail level. 6 1 Link to post Share on other sites More sharing options...
KeithAnthony Posted November 2, 2023 Share Posted November 2, 2023 My home town station had a crossover between the platforms and a cut-out on one side to give clearance for the cylinder. Still there afaik. 1 3 Link to post Share on other sites More sharing options...
Mick38 Posted November 3, 2023 Share Posted November 3, 2023 Good to hear of some Manors actually being delivered. Here's hoping my "Grantham Manor" might arrive before Christmas! Talk about delayed gratification... 2 Link to post Share on other sites More sharing options...
Free At Last Posted November 3, 2023 Share Posted November 3, 2023 (edited) 2 hours ago, Mick38 said: Talk about delayed gratification... Delayed gratification is the resistance to the temptation of an immediate pleasure in the hope of obtaining a valuable and long-lasting reward in the long-term. In other words, delayed gratification describes the process that the subject undergoes when the subject resists the temptation of an immediate reward in preference for a later reward that is more favourable. Generally, delayed gratification is associated with resisting a smaller but more immediate reward in order to receive a larger or more enduring reward later. I'd sooner we talk about the Manor. Edited November 3, 2023 by Free At Last 3 1 Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted November 3, 2023 RMweb Gold Share Posted November 3, 2023 41 minutes ago, Free At Last said: Delayed gratification is the resistance to the temptation of an immediate pleasure in the hope of obtaining a valuable and long-lasting reward in the long-term. In other words, delayed gratification describes the process that the subject undergoes when the subject resists the temptation of an immediate reward in preference for a later reward that is more favourable. Generally, delayed gratification is associated with resisting a smaller but more immediate reward in order to receive a larger or more enduring reward later. I'd sooner we talk about the Manor. Instant gratification of the Manors already delivered and delayed gratification from those yet to come? 😃 1 3 Link to post Share on other sites More sharing options...
Accurascale staff McC Posted November 3, 2023 Accurascale staff Share Posted November 3, 2023 5 hours ago, Mick38 said: Good to hear of some Manors actually being delivered. Here's hoping my "Grantham Manor" might arrive before Christmas! Talk about delayed gratification... Every single retailer order will have left our warehouse by close of business and every direct order by close of business tomorrow. No need to worry :) 4 3 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted November 3, 2023 RMweb Premium Share Posted November 3, 2023 On 27/10/2023 at 08:40, St Enodoc said: I hope mine's on its way to Kernow then. It has indeed reached Kernow and is now in transit to the Southern Hemisphere. 1 2 Link to post Share on other sites More sharing options...
B15nac Posted November 3, 2023 Share Posted November 3, 2023 Hi Has anyone got a picture of there Draycott Manor yet? Kind regards Neil Link to post Share on other sites More sharing options...
Recommended Posts
Posted by AY Mod,
10 reactions
Go to this post
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now