RMweb Gold Ian Hargrave Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 1 minute ago, Rugd1022 said: Photographic proof required, or else...! Must say 7812 looks stonkingly fabulous in Suzy Sulzer's photo above 😉 It certainly is. And sorry,it’s just my word you’ll have to accept .It’s when you get close up to this model you begin to realise just how good it is and no photo is going to give you that. I’m particularly impressed by the front end and “face” .The tiny rivet detail is one example. I like the way the tender coupling is designed with IMHO a sensible workable space which convinces in operation. The wheels and valve gear are suitably toned down,avoiding the glaring steel-bright appearance that afflicts some models 7 2 Link to post Share on other sites More sharing options...
RMweb Premium melmerby Posted August 10, 2023 RMweb Premium Share Posted August 10, 2023 2 minutes ago, Ian Hargrave said: The wheels and valve gear are suitably toned down,avoiding the glaring steel-bright appearance that afflicts some models I like the thicker section that these have compared to some models, which are just stamped from thinish sheet metal. Biggest problem I have found is getting a non-sound Next18 decoder. I thought I had a Zimo in stock but it was just a blanking plug when I fished it out this morning☹️ Looks like Modelbahn Lippe as UK stores seem extremely depleted of 'better' brands like ESU, Lenz & Zimo. Link to post Share on other sites More sharing options...
RMweb Gold Harlequin Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 (edited) 30 minutes ago, melmerby said: I like the thicker section that these have compared to some models, which are just stamped from thinish sheet metal. Biggest problem I have found is getting a non-sound Next18 decoder. I thought I had a Zimo in stock but it was just a blanking plug when I fished it out this morning☹️ Looks like Modelbahn Lippe as UK stores seem extremely depleted of 'better' brands like ESU, Lenz & Zimo. YouChoos have some nice new Zimo MN180N18's in stock (at time of writing). I just about had the presence of mind to order some a few days ago when I found out the Manors were coming. It's a race to see which gets here first! ETA for my Manors: 1800 to 1900 hours this evening... I think I'm at the end of the driver's round, which means that, for me, delivery today is hanging by a thread. Edited August 10, 2023 by Harlequin 3 Link to post Share on other sites More sharing options...
Michael Hodgson Posted August 10, 2023 Share Posted August 10, 2023 31 minutes ago, melmerby said: Biggest problem I have found is getting a non-sound Next18 decoder. I thought I had a Zimo in stock but it was just a blanking plug when I fished it out this morning☹️ https://www.accurascale.com/products/gwr-manor-lokpilot-dcc-decoder?_pos=2&_sid=e21b34c7b&_ss=r expected delivery May this year! 😄 I'm sure it will come in due course. Link to post Share on other sites More sharing options...
Accurascale staff McC Posted August 10, 2023 Accurascale staff Share Posted August 10, 2023 2 minutes ago, Michael Hodgson said: https://www.accurascale.com/products/gwr-manor-lokpilot-dcc-decoder?_pos=2&_sid=e21b34c7b&_ss=r expected delivery May this year! 😄 I'm sure it will come in due course. Here next week as posted earlier in the thread. HTH 1 Link to post Share on other sites More sharing options...
Michael Hodgson Posted August 10, 2023 Share Posted August 10, 2023 4 minutes ago, McC said: Here next week as posted earlier in the thread. HTH Sounds good to me as my loco's still to come too :) Perhaps they will save postage and send both together. Link to post Share on other sites More sharing options...
Accurascale staff McC Posted August 10, 2023 Accurascale staff Share Posted August 10, 2023 (edited) 7 minutes ago, Michael Hodgson said: Sounds good to me as my loco's still to come too :) Perhaps they will save postage and send both together. If you drop support a mail or chat with both order numbers they can certainly merge them for you. Edited August 10, 2023 by McC Link to post Share on other sites More sharing options...
GMKAT7 Posted August 10, 2023 Share Posted August 10, 2023 Afternoon folks, Happy to join the bandwagon as my 7812 has just arrived 😊 Ordered on 21st December 2021 as a post-operation cheer up. Took a few minutes to actually get the lid off the box, almost a vacuum seal. Loco is fantastic and arrived whilst SWMBO is in York for the day. Looking forward giving it a test run later today, with my Siphon G as a trailing load. Can 't wait for my WR Type 3 to arrive next year now, congratulations to all at Accurascale for this! Best regards, Nigel. 6 Link to post Share on other sites More sharing options...
Harry220 Posted August 10, 2023 Share Posted August 10, 2023 My first Manor has arrived. It’s a little surreal to be honest. Erlestoke Manor is absolutely wonderful and looks just like the real thing in miniature. Words cannot express simply how thrilled I am. Thank you Accurascale; they were indeed worth the wait. 4 1 Link to post Share on other sites More sharing options...
RMweb Gold MikeParkin65 Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 Seems my 7812 has just been signed for by Mrs P. Productivity severely affected at work and I will be cycling the 'quick route' home come clocking off time! :) 2 2 2 Link to post Share on other sites More sharing options...
RMweb Premium melmerby Posted August 10, 2023 RMweb Premium Share Posted August 10, 2023 1 hour ago, Harlequin said: YouChoos have some nice new Zimo MN180N18's in stock (at time of writing). Thanks for the tip. 2 ordered 1 Link to post Share on other sites More sharing options...
RMweb Gold zr2498 Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 7800 arrived this afternoon and wow! The detail and the colour / finish is superb. Apologies about the reflections on the camera lens. Not my region for modelling, but couldn't resist. Well done Accurascale. The sound project is fine. I guess there is a limit on the size of speaker possible with such a low profile tender. I expected to hear some brake squeel on stopping, especially when using F2 braking. Perhaps GWR drivers are too good to have this effect! Also expected a fade out when switch off F1 sound, but it is rather abrupt. Very minor points re a model which is terrific. 10 Link to post Share on other sites More sharing options...
Accurascale staff McC Posted August 10, 2023 Accurascale staff Share Posted August 10, 2023 36 minutes ago, zr2498 said: The sound project is fine. I guess there is a limit on the size of speaker possible with such a low profile tender. I expected to hear some brake squeel on stopping, especially when using F2 braking. Perhaps GWR drivers are too good to have this effect! Also expected a fade out when switch off F1 sound, but it is rather abrupt. Squeal is deceleration specific so perhaps some harder braking needed? Fade out is on F20 Hope that helps! 3 Link to post Share on other sites More sharing options...
RMweb Gold 57xx Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 Hopefully it doesn't rain between now and tomorrow evening. DHL claim parcel handed to resident, video says otherwise as it was dumped next to the bins. Depending if anyone spots a box sitting in the front garden and takes a shine to it I may or may not have Anthony Manor waiting when I get home. 🙄 7 Link to post Share on other sites More sharing options...
RMweb Premium 37Junkie22 Posted August 10, 2023 RMweb Premium Share Posted August 10, 2023 Did anyone else arrive without the plastic sleeve on there box? 3 Link to post Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 2 minutes ago, 37Junkie22 said: Did anyone else arrive without the plastic sleeve on there box? 2 minutes ago, 37Junkie22 said: Did anyone else arrive without the plastic sleeve on there box? Never wear them .But yes mine came sans sleeve too . Of what particular use it is I cannot say. Link to post Share on other sites More sharing options...
Miss Prism Posted August 10, 2023 Share Posted August 10, 2023 (edited) Apologies for being a pain in the wotsit, but the perimeter beading on top of the tender fender (and, apparently *, the cabside cutout beading) should be black for GWR days. Not sure what was followed in BR(W) days (that nice Mr Rathbone @Ian Rathbone might know) - any views and evidence would be welcome. The preservationists do all sorts of things of course. * I'm not convinced about the cabside cutout beading colour Edited August 12, 2023 by Miss Prism caveat on cabside cutout beading Link to post Share on other sites More sharing options...
RMweb Gold sjrixon Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 Looking really nice! - Wishing for Rails to get theirs, so they can ship mine!!! Link to post Share on other sites More sharing options...
Covkid Posted August 10, 2023 Share Posted August 10, 2023 The nice DHL man delivered my 7812 an hour ago and what an absolutely beauty my first Accurascale loco is. Very impressed apart from one little thing. The "GWR" handbook in the box has been "misprinted" with the pages either sliced off at the top and bottom at a slight angle. Or else printed incorrectly. Not run it yet but as I would expect from Accurascale no bits in the box. Thanks for a quality product 1 1 Link to post Share on other sites More sharing options...
Accurascale staff McC Posted August 10, 2023 Accurascale staff Share Posted August 10, 2023 8 minutes ago, Covkid said: The nice DHL man delivered my 7812 an hour ago and what an absolutely beauty my first Accurascale loco is. Very impressed apart from one little thing. The "GWR" handbook in the box has been "misprinted" with the pages either sliced off at the top and bottom at a slight angle. Or else printed incorrectly. Not run it yet but as I would expect from Accurascale no bits in the box. Thanks for a quality product If the paperwork doesn’t look like this do please drop us a note and we’ll send a replacement. 8 Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 8 hours ago, Dunsignalling said: Many happy returns. A positively gleaming 7812 seen, about to take a drink at Bishops Lydeard yesterday, which was a bit of a scorcher and a "cake day" at the TMRG clubroom. By all accounts, you may need to bring a brolly on Saturday! John Yes sounds bad this Saturday! But I have to wait another week until 19th for my personal birthday Manor fest…. 2 Link to post Share on other sites More sharing options...
Covkid Posted August 10, 2023 Share Posted August 10, 2023 23 minutes ago, McC said: If the paperwork doesn’t look like this do please drop us a note and we’ll send a replacement. Mine is the same as that yes. But are the top and bottom edges of the pages supposed to parallel the printed lines on the pages ? If so then fine, and maybe it is just me, and maybe I have OCD. 2 Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 5 minutes ago, Phil Bullock said: Yes sounds bad this Saturday! But I have to wait another week until 19th for my personal birthday Manor fest…. It may hopefully have cleared up by then...😀 2 Link to post Share on other sites More sharing options...
RMweb Gold zr2498 Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 5 minutes ago, Covkid said: Mine is the same as that yes. But are the top and bottom edges of the pages supposed to parallel the printed lines on the pages ? If so then fine, and maybe it is just me, and maybe I have OCD. All part of the retro look! 1 Link to post Share on other sites More sharing options...
RMweb Gold zr2498 Posted August 10, 2023 RMweb Gold Share Posted August 10, 2023 1 hour ago, McC said: Squeal is deceleration specific so perhaps some harder braking needed? Fade out is on F20 Hope that helps! I have hit the brakes hard from half full speed. No brake squeal. A bit of squeal often occurs even when shunting at low speed. The 'air' sound is present but not brakes on wheels. Fade out on F20 works fine but most sound projects do the same when F1 is turned off. F20 on, F1 off and F20 off seems a bit complex. Perhaps the Lok programmer needs to come out. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Posted by AY Mod,
10 reactions
Go to this post
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now