Guest Posted November 29, 2022 Share Posted November 29, 2022 12 minutes ago, newbryford said: First impression is that they look good. It's certainly not a decal. But: There is a bit of fuzziness on the curved ends of the blue on a couple of coaches and one of the TFs looks like the blue mask wasn't down fully across the top of a couple of spaces between windows. (Other fuzziness is my dodgy phonecam) Both of these will be subject to a short visit to the paintshop soon. The fixed "cosmetic" buckeye and magnetic buckeye are quite welcome. Certainly more acceptable that the decals. Thanks for the images, I’m impressed. Definitely an upgrade on the old coaches. Link to post Share on other sites More sharing options...
scouse889 Posted November 29, 2022 Share Posted November 29, 2022 Yes, on the whole these look very good - and certainly better than the FGW fag packet ones. The inclusion of magnetic couplings is good too. Were they included in the FGW coaches, I thought they only came with the fixed bar? Definitely tempted by a rake of these. Link to post Share on other sites More sharing options...
ac1874 Posted December 2, 2022 Share Posted December 2, 2022 It sounds like the Pullman is here and about to be available. Without Hornby bashing, I hope everyone who preordered (somewhere other than Hornby) gets their model. 1 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted December 4, 2022 RMweb Premium Share Posted December 4, 2022 On 29/11/2022 at 14:16, newbryford said: The fixed "cosmetic" buckeye and magnetic buckeye are quite welcome. The mag couplers ran extremely well in push mode for two days on Deadmans Lane this weekend. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted December 4, 2022 RMweb Gold Share Posted December 4, 2022 (edited) 2 hours ago, newbryford said: The mag couplers ran extremely well in push mode for two days on Deadmans Lane this weekend. Hang on…. There was a comedy moment I saw on sunday when 30 something pairs of eyes were watching that EMT HST rattle through only for the power car to detach just before exiting…. Leading to a synchronous groan from the crowd who were silently fixated by its passing a few seconds earlier ! Edited December 4, 2022 by adb968008 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted December 4, 2022 RMweb Premium Share Posted December 4, 2022 1 minute ago, adb968008 said: Hang on…. There was a comedy moment I saw on sunday when 30 something pairs of eyes were watching that EMT HST rattle through only for the power car to detach just before exiting…. Leading to a synchronous groan from the crowd who were silently fixated by its passing a few seconds earlier ! Keep up at the back....... That was last week at the NEC using Hunt couplings on the old mk3s. This weekend were the Hornby couplings in the new mk3s. 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted December 4, 2022 RMweb Gold Share Posted December 4, 2022 (edited) 4 minutes ago, newbryford said: Keep up at the back....... That was last week at the NEC using Hunt couplings on the old mk3s. This weekend were the Hornby couplings in the new mk3s. Fair enough… Though that moment at the NEC was worth documenting… it was funny because how silent concentration everyone was, until that happened ! Edited December 4, 2022 by adb968008 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted December 4, 2022 RMweb Premium Share Posted December 4, 2022 7 minutes ago, adb968008 said: Hang on…. There was a comedy moment I saw on sunday when 30 something pairs of eyes were watching that EMT HST rattle through only for the power car to detach just before exiting…. Leading to a synchronous groan from the crowd who were silently fixated by its passing a few seconds earlier ! I run HSTs in push mode with mag couplings as I did it with them with TLs to close up the gaps. If an emergency stop (Or a short causing a stop) occurs with a mag, there is a possibility that the momentum of the coaches will sometimes detach them from the PC. That is what you saw. Link to post Share on other sites More sharing options...
Shoey Posted December 5, 2022 Share Posted December 5, 2022 Does anybody know whether Hornby are doing the magnetic couplers as a separate product code so they’re available to buy for previous MK3’s (sliding door XC & GWR) cheers 🙂 Link to post Share on other sites More sharing options...
frobisher Posted December 5, 2022 Share Posted December 5, 2022 35 minutes ago, Shoey said: Does anybody know whether Hornby are doing the magnetic couplers as a separate product code so they’re available to buy for previous MK3’s (sliding door XC & GWR) No sign of them at the moment, but I certainly hope they will, especially given they do these lovely looking things (though out of stock) https://uk.Hornby.com/products/set-4-working-scharfenberg-coupling-hc8040 1 Link to post Share on other sites More sharing options...
gary_lner Posted December 7, 2022 Share Posted December 7, 2022 Looks like the re tooled power cars are in stock at Hornby so shouldn't be long before they are with retailers. Midland pullman Rail adventure Gwr fgw fag packet On top of what's arrived already Gary 2 Link to post Share on other sites More sharing options...
AshleyH Posted December 9, 2022 Share Posted December 9, 2022 I was able to examine and test some of the revised tooling GWR Castle set power cars in our local shop yesterday. Both the power and dummy cars come with working motorised fans, which operated on DC, cab doors no longer open, 21Pin DCC sockets and the roof fans are a DCC function, explained in the new style colour instructions. Temped, but there were a couple of quality issues on the dummy power car, the fan appeared to be slightly off centre and clicking as if catching on something, might be easily resolvable with the body off, and two minor paint imperfections. Etched nameplates are provided for both power cars, but no etched silver GWR plates, which I think were present on earlier versions. No sign of the matching sliding door MK3s yet though…. Link to post Share on other sites More sharing options...
TomScrut Posted December 9, 2022 Share Posted December 9, 2022 On 07/12/2022 at 17:36, gary_lner said: Rail adventure Has anybody got their hands on a pair of these yet and found if they have couplers (or provision for) on the front? Link to post Share on other sites More sharing options...
RMweb Premium LMSfan72 Posted December 9, 2022 RMweb Premium Share Posted December 9, 2022 33 minutes ago, TomScrut said: Has anybody got their hands on a pair of these yet and found if they have couplers (or provision for) on the front? Now that’s a good question! Mine delivered today but I’m away on business until next week so can’t check. I was planning to run them with my custom made UBVs (when I finish them) and hadn’t considered the front coupling until you raised it - https://www.instagram.com/p/CgB45dNI4Fq/ Might be some more customising to happen yet! 2 Link to post Share on other sites More sharing options...
Guest Posted December 9, 2022 Share Posted December 9, 2022 2 hours ago, TomScrut said: Has anybody got their hands on a pair of these yet and found if they have couplers (or provision for) on the front? Hattons have just uploaded photos of all the HSTs currently available, it appears the rail adventure ones don’t have a cab end coupling from the photos… Link to post Share on other sites More sharing options...
RMweb Premium Steadfast Posted December 9, 2022 RMweb Premium Share Posted December 9, 2022 (edited) 3 hours ago, AshleyH said: Etched nameplates are provided for both power cars, but no etched silver GWR plates, which I think were present on earlier versions. Only the first 4 (from memory) power cars to go green had the cast logos, the rest just have stickers. Not sure what numbers Hornby have done but odds are the real thing doesn't have cast logos. Jo Edited December 9, 2022 by Steadfast 2 Link to post Share on other sites More sharing options...
TomScrut Posted December 9, 2022 Share Posted December 9, 2022 33 minutes ago, Northmoor MPD said: Hattons have just uploaded photos of all the HSTs currently available, it appears the rail adventure ones don’t have a cab end coupling from the photos… It's whether there's something in the detailing pack. I never thought there would be something on there as it came out of the box. It will be a bit of a screw up from them IMO if they don't. These locos are/will only be used back to back pulling trains from one end as far as I am aware. 1 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted December 9, 2022 RMweb Premium Share Posted December 9, 2022 (edited) 2 hours ago, Northmoor MPD said: Hattons have just uploaded photos of all the HSTs currently available, it appears the rail adventure ones don’t have a cab end coupling from the photos… It's only a diesel and no-one cares. Edited December 9, 2022 by newbryford 1 1 4 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted December 9, 2022 RMweb Gold Share Posted December 9, 2022 (edited) 3 hours ago, TomScrut said: It's whether there's something in the detailing pack. I never thought there would be something on there as it came out of the box. It will be a bit of a screw up from them IMO if they don't. These locos are/will only be used back to back pulling trains from one end as far as I am aware. Its not as if no one pointed it out. it was mentioned several times on here on the day of release. There is not really any excuse, the pictures show the power cars post 10th September 2022…. Hanson+Hall logos are not present… the livery was updated… so these models were made very recently. maybe there is a coupling in the box ? Edited December 9, 2022 by adb968008 2 Link to post Share on other sites More sharing options...
Guest Posted December 9, 2022 Share Posted December 9, 2022 Just ordered a pair of Midland Pullman power cars, I wasn’t going to bother but I think Hornby have made a decent job of them and has made me want a set! 😫 Hattons had 10+ at lunchtime and now they’ve all gone! 😳 Link to post Share on other sites More sharing options...
scouse889 Posted December 9, 2022 Share Posted December 9, 2022 5 hours ago, Steadfast said: Only the first 4 (from memory) power cars to go green had the cast logos, the rest just have stickers. Not sure what numbers Hornby have done but odds are the real thing doesn't have cast logos. Jo Yes, I think I read somewhere that only 43187/43188 and 43005/43041 were out shopped with cast logos and numbers on the former guards compartment door, then all subsequent ones had stickers and the numbers cab side like the previous dynamic lines livery. So the models of 43004/43155 in the new Hornby Castle pack are correct without cast logos. 1 2 Link to post Share on other sites More sharing options...
ianmacc Posted December 10, 2022 Share Posted December 10, 2022 Just picked up the railroad intercity executive power and dummy car pack as with retailer discount it was a pocket friendly (by 2022 standards) £123. The power car white lights work but obviously not the dummy car red. Strangely though the power car white lights still illuminate in reverse direction! Is this a design fault or just my set? I just run the detailed buffered DVT at the rear so this isn’t an issue to me. 1 Link to post Share on other sites More sharing options...
scouse889 Posted December 10, 2022 Share Posted December 10, 2022 1 hour ago, ianmacc said: Just picked up the railroad intercity executive power and dummy car pack as with retailer discount it was a pocket friendly (by 2022 standards) £123. The power car white lights work but obviously not the dummy car red. Strangely though the power car white lights still illuminate in reverse direction! Is this a design fault or just my set? I just run the detailed buffered DVT at the rear so this isn’t an issue to me. As I recall the original release of these toolings R2707 43100/43101 in VT had the headlights illuminating regardless of direction of travel, so I guess this has not been changed in any of the subsequent releases (original blue/grey InterCity 125, GWR green in a train set, and now these IC Swallow PCs). Link to post Share on other sites More sharing options...
RMweb Premium boxbrownie Posted December 10, 2022 RMweb Premium Share Posted December 10, 2022 1 hour ago, ianmacc said: Just picked up the railroad intercity executive power and dummy car pack as with retailer discount it was a pocket friendly (by 2022 standards) £123. The power car white lights work but obviously not the dummy car red. Strangely though the power car white lights still illuminate in reverse direction! Is this a design fault or just my set? I just run the detailed buffered DVT at the rear so this isn’t an issue to me. I still baulk at the idea of paying £360 for a diesel loco and a coach (effectively), I think the premium set is a lovely model but just not worth the cost over the Railroad set which I have, it works it just lacks finesse. 1 1 Link to post Share on other sites More sharing options...
CazRail Posted December 10, 2022 Share Posted December 10, 2022 My FGW powercars have arrived this morning. Couple of printing sloppiness with some numbers not being 100% straight, but overall very happy. No decoders yet to run them, so they'll have to wait. A little confused as to why they havent supplied magnetic couplers mind, but no biggie as I have plenty of Hunt couplers in stock. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now